Nortel-Magellan-Passport-FrameRelayDteMIB :: frDteAcceptUndefinedDlci

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-FrameRelayDteMIB › frDteAcceptUndefinedDlci

frDteAcceptUndefinedDlci

Module: Nortel-Magellan-Passport-FrameRelayDteMIB

OID (symbolic): Nortel-Magellan-Passport-FrameRelayDteMIB::frDteAcceptUndefinedDlci

OID (numeric): 1.3.6.1.4.1.562.2.4.1.101.22.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This parameter allows previously undefined Data Link Connection Identifiers (DLCIs) to be dynamically accepted in the default remote group. If set to enabled, undefined DLCIs will be accepted, if disabled, they will not.

What is frDteAcceptUndefinedDlci?

Controls whether previously undefined DLCIs (Data Link Connection Identifiers) arriving on this interface are dynamically accepted into the default remote group. With the default of enabled, a new PVC that the far end starts using will be auto-created; setting it to disabled means frames on an undefined DLCI are rejected until the DLCI is explicitly provisioned. An admin might disable this on a security-sensitive link to prevent unexpected circuits from being created automatically.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.22.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteAcceptUndefinedDlci

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.101.22.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-FrameRelayDteMIB::frDteAcceptUndefinedDlci.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.101.22.1.1.1 i <value>

Start monitoring Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-FrameRelayDteMIB::frDteAcceptUndefinedDlci OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (Frame Relay DTE/DLCI access) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.101frDteNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.22frDteProvTableNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.22.1frDteProvEntryNortel-Magellan-Passport-FrameRelayDteMIB
1.3.6.1.4.1.562.2.4.1.101.22.1.1frDteAcceptUndefinedDlciNortel-Magellan-Passport-FrameRelayDteMIB