All MIBs › Nortel-Magellan-Passport-AtmUniMIB › atmIfUniSigVcdUsageParameterControl
atmIfUniSigVcdUsageParameterControl
Module: Nortel-Magellan-Passport-AtmUniMIB
OID (symbolic): Nortel-Magellan-Passport-AtmUniMIB::atmIfUniSigVcdUsageParameterControl
OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1.70
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software releases, but should no longer be used
What is atmIfUniSigVcdUsageParameterControl?
atmIfUniSigVcdUsageParameterControl decides whether this connection on the UNI enforces Usage Parameter Control (traffic policing) on incoming cells: sameAsCa(2) inherits the UPC setting from the connection's service-category component, while disabled(1) turns policing off for this connection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1.70 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmUniMIB::atmIfUniSigVcdUsageParameterControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1.70.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmUniMIB::atmIfUniSigVcdUsageParameterControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1.70.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> atmIfUniSigVcdUsageParameterControl.1
Start monitoring Nortel Magellan Passport multiservice switch (ATM UNI signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmUniMIB::atmIfUniSigVcdUsageParameterControl OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (ATM UNI signaling) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.114 | atmIf | Nortel-Magellan-Passport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.6 | atmIfUni | Nortel-Magellan-Passport-AtmUniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.6.3 | atmIfUniSig | Nortel-Magellan-Passport-AtmUniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.6.3.2 | atmIfUniSigVcd | Nortel-Magellan-Passport-AtmUniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10 | atmIfUniSigVcdProvTable | Nortel-Magellan-Passport-AtmUniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1 | atmIfUniSigVcdProvEntry | Nortel-Magellan-Passport-AtmUniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.6.3.2.10.1.70 | atmIfUniSigVcdUsageParameterControl | Nortel-Magellan-Passport-AtmUniMIB |