Nortel-Magellan-Passport-AtmUniMIB :: atmIfUniSigOperationalState

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmUniMIB › atmIfUniSigOperationalState

atmIfUniSigOperationalState

Module: Nortel-Magellan-Passport-AtmUniMIB

OID (symbolic): Nortel-Magellan-Passport-AtmUniMIB::atmIfUniSigOperationalState

OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.6.3.11.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute indicates the OSI Operational State of the component.

The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service.

The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle.

What is atmIfUniSigOperationalState?

atmIfUniSigOperationalState is the OSI operational state of signalling on this UNI — enabled(1) means the signalling instance is actually running, disabled(0) means it isn't even if adminState is unlocked, for example due to an internal fault. This is the field to check first when new calls stop being able to set up on the interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.6.3.11.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmUniMIB::atmIfUniSigOperationalState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.6.3.11.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmUniMIB::atmIfUniSigOperationalState.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> atmIfUniSigOperationalState.1

Start monitoring Nortel Magellan Passport multiservice switch (ATM UNI signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmUniMIB::atmIfUniSigOperationalState OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (ATM UNI signaling) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.114atmIfNortel-Magellan-Passport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.114.6atmIfUniNortel-Magellan-Passport-AtmUniMIB
1.3.6.1.4.1.562.2.4.1.114.6.3atmIfUniSigNortel-Magellan-Passport-AtmUniMIB
1.3.6.1.4.1.562.2.4.1.114.6.3.11atmIfUniSigStateTableNortel-Magellan-Passport-AtmUniMIB
1.3.6.1.4.1.562.2.4.1.114.6.3.11.1atmIfUniSigStateEntryNortel-Magellan-Passport-AtmUniMIB
1.3.6.1.4.1.562.2.4.1.114.6.3.11.1.2atmIfUniSigOperationalStateNortel-Magellan-Passport-AtmUniMIB