All MIBs › Nortel-Magellan-Passport-AtmUniMIB › atmIfUniAccountCollection
atmIfUniAccountCollection
Module: Nortel-Magellan-Passport-AtmUniMIB
OID (symbolic): Nortel-Magellan-Passport-AtmUniMIB::atmIfUniAccountCollection
OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.6.12.1.1
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit or force.
If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be suppressed.
The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate.
Description of bits: bill(0) test(1) study(2) audit(3) force(4)
What is atmIfUniAccountCollection?
atmIfUniAccountCollection is a bitmask (bill/test/study/audit/force) that turns SVC and SPVC call accounting on or off for this UNI and records why the data is being collected; if none of the bits are set, no accounting records are produced for calls on the interface, which is the first thing to check if billing reports show a gap.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.6.12.1.1 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmUniMIB::atmIfUniAccountCollection
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.6.12.1.1.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmUniMIB::atmIfUniAccountCollection.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.6.12.1.1.1 s <value>
Start monitoring Nortel Magellan Passport multiservice switch (ATM UNI signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmUniMIB::atmIfUniAccountCollection OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (ATM UNI signaling) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.114 | atmIf | Nortel-Magellan-Passport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.6 | atmIfUni | Nortel-Magellan-Passport-AtmUniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.6.12 | atmIfUniAcctOptTable | Nortel-Magellan-Passport-AtmUniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.6.12.1 | atmIfUniAcctOptEntry | Nortel-Magellan-Passport-AtmUniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.6.12.1.1 | atmIfUniAccountCollection | Nortel-Magellan-Passport-AtmUniMIB |