All MIBs › Nortel-Magellan-Passport-AtmTrunksMIB › trkAtmVccReportingBw
trkAtmVccReportingBw
Module: Nortel-Magellan-Passport-AtmTrunksMIB
OID (symbolic): Nortel-Magellan-Passport-AtmTrunksMIB::trkAtmVccReportingBw
OID (numeric): 1.3.6.1.4.1.562.2.4.1.60.3.11.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies how the bandwidth of the VCC is reported to the parent Trunk component. If its value is pcr and attribute bwElastic of AtmAccess has a value of no, the peak cell rate (PCR) of the VCC, defined in txTrafficDescParm of AtmIf Vcc Vcd, is reported. If its value is pcr and attribute bwElastic of AtmAccess has a value of yes, the minimum of the PCR, defined in txTrafficDescParm of AtmIf Vcc Vcd, and the current cell rate (CCR) of the VCC is reported. If its value is acr, the best measurement of the actual cell rate (ACR) of the VCC is reported, which is the minimum of the PCR, the CCR and the actual shaping rate (ASR). The value of the reported bandwidth of the VCC is indicated by the measuredSpeedToIf attribute of the parent Trunk component.
What is trkAtmVccReportingBw?
Controls which bandwidth figure this VCC reports to its parent trunk component: pcr (the default) reports the peak cell rate, or the PCR/current-cell-rate minimum if bandwidth is elastic, while acr reports the actual measured cell rate accounting for shaping. This choice determines what value the parent trunk's measuredSpeedToIf attribute reflects for capacity/routing decisions.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.3.11.1.3 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmTrunksMIB::trkAtmVccReportingBw
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.3.11.1.3.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmTrunksMIB::trkAtmVccReportingBw.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.60.3.11.1.3.1 i <value>
Start monitoring Nortel Magellan Passport multiservice switch (ATM trunk interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmTrunksMIB::trkAtmVccReportingBw OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (ATM trunk interfaces) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.60 | trk | Nortel-Magellan-Passport-TrunksMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.60.3 | trkAtm | Nortel-Magellan-Passport-AtmTrunksMIB |
| 1.3.6.1.4.1.562.2.4.1.60.3.11 | trkAtmInterfaceTable | Nortel-Magellan-Passport-AtmTrunksMIB |
| 1.3.6.1.4.1.562.2.4.1.60.3.11.1 | trkAtmInterfaceEntry | Nortel-Magellan-Passport-AtmTrunksMIB |
| 1.3.6.1.4.1.562.2.4.1.60.3.11.1.3 | trkAtmVccReportingBw | Nortel-Magellan-Passport-AtmTrunksMIB |