Nortel-Magellan-Passport-AtmTrunksMIB :: trkAtmBwElastic

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmTrunksMIB › trkAtmBwElastic

trkAtmBwElastic

Module: Nortel-Magellan-Passport-AtmTrunksMIB

OID (symbolic): Nortel-Magellan-Passport-AtmTrunksMIB::trkAtmBwElastic

OID (numeric): 1.3.6.1.4.1.562.2.4.1.60.3.11.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies how changes in the bandwidth of the atmConnection are handled by the ATM software. If its value is no, the atmConnection will be released by the ATM software if it is incapable of providing the bandwidth specified by the peak cell rate (PCR) defined in txTrafficDescParm of AtmIf Vcc Vcd. If the value is yes, the atmConnection is not released in this situation, but its bandwidth may be reduced. Also, if this value is yes, the Dynamic Speed Reporting mechanism must be enabled, by provisioning at least one value in the speedReportingThresholds attribute of the parent Trunk component.

What is trkAtmBwElastic?

Controls whether the trunk's ATM connection is released if it can't sustain the peak cell rate configured for it (no, the default) or instead kept alive with reduced bandwidth (yes). Setting this to yes also requires Dynamic Speed Reporting to be enabled via the parent trunk's speedReportingThresholds so bandwidth changes are actually communicated upstream.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.3.11.1.2
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmTrunksMIB::trkAtmBwElastic

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.60.3.11.1.2.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmTrunksMIB::trkAtmBwElastic.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.60.3.11.1.2.1 i <value>

Start monitoring Nortel Magellan Passport multiservice switch (ATM trunk interfaces) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmTrunksMIB::trkAtmBwElastic OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport multiservice switch (ATM trunk interfaces) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.60trkNortel-Magellan-Passport-TrunksMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.60.3trkAtmNortel-Magellan-Passport-AtmTrunksMIB
1.3.6.1.4.1.562.2.4.1.60.3.11trkAtmInterfaceTableNortel-Magellan-Passport-AtmTrunksMIB
1.3.6.1.4.1.562.2.4.1.60.3.11.1trkAtmInterfaceEntryNortel-Magellan-Passport-AtmTrunksMIB
1.3.6.1.4.1.562.2.4.1.60.3.11.1.2trkAtmBwElasticNortel-Magellan-Passport-AtmTrunksMIB