All MIBs › Nortel-Magellan-Passport-AtmPnniMIB › atmIfVptPnniRccHelloInactivityFactor
atmIfVptPnniRccHelloInactivityFactor
Module: Nortel-Magellan-Passport-AtmPnniMIB
OID (symbolic): Nortel-Magellan-Passport-AtmPnniMIB::atmIfVptPnniRccHelloInactivityFactor
OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This attribute specifies the number of Hello intervals allowed to pass without receiving a Hello from the neighbor node, before an attempt is made to re-stage. The hello inactivity timer is enabled in the oneWayInside, twoWayInside, oneWayOutside, twoWayOutside and commonOutside hello states (see the helloState attribute on the Rcc component for a description of these states). Note that the value for the Hello interval used in the calculation is the one specified in the Hello packet from the neighbor node.
A value of 0 specifies that the value provisioned for the helloInactivityFactor attribute of the ARtg Pnni component should be used. DESCRIPTION
What is atmIfVptPnniRccHelloInactivityFactor?
This sets how many Hello intervals (using the neighbor's advertised interval) may pass without a Hello being received on the RCC of this VPT-based PNNI interface before the node tries to re-establish the adjacency; 0 inherits the parent ARtg Pnni component's value. Admins raise it on flaky links to avoid flapping the adjacency on brief packet loss.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1.3 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmPnniMIB::atmIfVptPnniRccHelloInactivityFactor
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1.3.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmPnniMIB::atmIfVptPnniRccHelloInactivityFactor.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1.3.1 i <value>
Start monitoring Nortel Magellan Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmPnniMIB::atmIfVptPnniRccHelloInactivityFactor OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM switch (PNNI routing) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.114 | atmIf | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9 | atmIfVpt | Nortel-Magellan-Passport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.9.7 | atmIfVptPnni | Nortel-Magellan-Passport-AtmPnniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.7.3 | atmIfVptPnniRcc | Nortel-Magellan-Passport-AtmPnniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11 | atmIfVptPnniRccHlParmsTable | Nortel-Magellan-Passport-AtmPnniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1 | atmIfVptPnniRccHlParmsEntry | Nortel-Magellan-Passport-AtmPnniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.7.3.11.1.3 | atmIfVptPnniRccHelloInactivityFactor | Nortel-Magellan-Passport-AtmPnniMIB |