Nortel-Magellan-Passport-AtmPnniMIB :: atmIfPnniSigVcdTrafficShaping

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmPnniMIB › atmIfPnniSigVcdTrafficShaping

atmIfPnniSigVcdTrafficShaping

Module: Nortel-Magellan-Passport-AtmPnniMIB

OID (symbolic): Nortel-Magellan-Passport-AtmPnniMIB::atmIfPnniSigVcdTrafficShaping

OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.50

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface.

When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components.

When disabled is selected, traffic shaping for this connection is disabled.

What is atmIfPnniSigVcdTrafficShaping?

This turns traffic shaping on (sameAsCa, inheriting the setting from the interface's service-category component) or off (disabled) for the default connection template on this PNNI interface's signalling channel. Admins disable it only when they specifically don't want egress smoothing applied to new connections on this channel.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.50
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmPnniMIB::atmIfPnniSigVcdTrafficShaping

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.50.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmPnniMIB::atmIfPnniSigVcdTrafficShaping.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.50.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> atmIfPnniSigVcdTrafficShaping.1

Start monitoring Nortel Magellan Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmPnniMIB::atmIfPnniSigVcdTrafficShaping OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM switch (PNNI routing) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.114atmIfNortel-Magellan-Passport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.114.96atmIfPnniNortel-Magellan-Passport-AtmPnniMIB
1.3.6.1.4.1.562.2.4.1.114.96.2atmIfPnniSigNortel-Magellan-Passport-AtmPnniMIB
1.3.6.1.4.1.562.2.4.1.114.96.2.2atmIfPnniSigVcdNortel-Magellan-Passport-AtmPnniMIB
1.3.6.1.4.1.562.2.4.1.114.96.2.2.10atmIfPnniSigVcdProvTableNortel-Magellan-Passport-AtmPnniMIB
1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1atmIfPnniSigVcdProvEntryNortel-Magellan-Passport-AtmPnniMIB
1.3.6.1.4.1.562.2.4.1.114.96.2.2.10.1.50atmIfPnniSigVcdTrafficShapingNortel-Magellan-Passport-AtmPnniMIB