All MIBs › Nortel-Magellan-Passport-AtmPnniMIB › atmIfPnniAccountCollection
atmIfPnniAccountCollection
Module: Nortel-Magellan-Passport-AtmPnniMIB
OID (symbolic): Nortel-Magellan-Passport-AtmPnniMIB::atmIfPnniAccountCollection
OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.96.12.1.1
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: This attribute is used to turn accounting on or off for SVC and SPVC connections. It also specifies the reason(s) for which accounting data is collected: billing, test, study, audit, or force.
If the set of reasons is not empty then accounting records will be generated by this interface in the following situations: - on a TODA changeover if TODA is enabled; - every 12 hours (per connection) if TODA is disabled; - on every call clear (a call record with final cell counts).
If none of the reasons is present, then accounting will be suppressed.
The reason for collection is recorded in the accounting record, in the attribute callingCollectReason or calledCollectReason as appropriate.
Description of bits: bill(0) test(1) study(2) audit(3) force(4)
What is atmIfPnniAccountCollection?
This bitmask turns SVC/SPVC accounting on or off for this PNNI interface and selects which reason codes (bill, test, study, audit, force) trigger a usage record. If any bit is set, records are generated at TOD-alarm changeover, every 12 hours per connection, or on every call clear; an admin sets this to feed billing or capacity-planning systems, and clears all bits to suppress accounting overhead.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.96.12.1.1 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmPnniMIB::atmIfPnniAccountCollection
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.96.12.1.1.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmPnniMIB::atmIfPnniAccountCollection.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.96.12.1.1.1 s <value>
Start monitoring Nortel Magellan Passport ATM switch (PNNI routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmPnniMIB::atmIfPnniAccountCollection OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM switch (PNNI routing) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.114 | atmIf | Nortel-Magellan-Passport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.96 | atmIfPnni | Nortel-Magellan-Passport-AtmPnniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.96.12 | atmIfPnniAcctOptTable | Nortel-Magellan-Passport-AtmPnniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.96.12.1 | atmIfPnniAcctOptEntry | Nortel-Magellan-Passport-AtmPnniMIB |
| 1.3.6.1.4.1.562.2.4.1.114.96.12.1.1 | atmIfPnniAccountCollection | Nortel-Magellan-Passport-AtmPnniMIB |