All MIBs › Nortel-Magellan-Passport-AtmIispMIB › atmIfVptIispSigVcdUsageParameterControl
atmIfVptIispSigVcdUsageParameterControl
Module: Nortel-Magellan-Passport-AtmIispMIB
OID (symbolic): Nortel-Magellan-Passport-AtmIispMIB::atmIfVptIispSigVcdUsageParameterControl
OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.9.6.3.2.10.1.70
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This attribute specifies whether this connection enforces usage parameter control when receiving traffic from the ATM interface.
When sameAsCa is selected, UPC for the connection is based on the usageParameterControl attribute of the connection's service category component under the ConnectionAdministrator. If the service category has UPC enabled, then UPC is enabled for the connection. Note that enabling UPC may have no effect under certain cases. These cases are listed in the description of the usageParameterControl operational attribute, which is under the Vcc Tm or Vpc Tm component.
When disabled is selected, UPC for this connection is disabled.
The value sameAsInterface is for migration from previous software releases, but should no longer be used
What is atmIfVptIispSigVcdUsageParameterControl?
Specifies whether this virtual path's signaling connection enforces usage parameter control on received traffic: disabled (the default) or sameAsCa, which inherits the setting from the service-category component.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.6.3.2.10.1.70 snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmIispMIB::atmIfVptIispSigVcdUsageParameterControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.9.6.3.2.10.1.70.1 snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmIispMIB::atmIfVptIispSigVcdUsageParameterControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.9.6.3.2.10.1.70.1 i <value>
Start monitoring Nortel Magellan Passport ATM switch (IISP inter-switch signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmIispMIB::atmIfVptIispSigVcdUsageParameterControl OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM switch (IISP inter-switch signaling) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.562 | nortel | CPM-NORTEL-MIB |
| 1.3.6.1.4.1.562.2 | magellan | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4 | passport | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1 | components | Nortel-Magellan-Passport-UsefulDefinitionsMIB |
| 1.3.6.1.4.1.562.2.4.1.114 | atmIf | Nortel-Magellan-Passport-AtmCoreMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9 | atmIfVpt | Nortel-Magellan-Passport-AtmCoreMIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.114.9.6 | atmIfVptIisp | Nortel-Magellan-Passport-AtmIispMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.6.3 | atmIfVptIispSig | Nortel-Magellan-Passport-AtmIispMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.6.3.2 | atmIfVptIispSigVcd | Nortel-Magellan-Passport-AtmIispMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.6.3.2.10 | atmIfVptIispSigVcdProvTable | Nortel-Magellan-Passport-AtmIispMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.6.3.2.10.1 | atmIfVptIispSigVcdProvEntry | Nortel-Magellan-Passport-AtmIispMIB |
| 1.3.6.1.4.1.562.2.4.1.114.9.6.3.2.10.1.70 | atmIfVptIispSigVcdUsageParameterControl | Nortel-Magellan-Passport-AtmIispMIB |