Nortel-Magellan-Passport-AtmIispMIB :: atmIfIispSigVcdTrafficShaping

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-AtmIispMIB › atmIfIispSigVcdTrafficShaping

atmIfIispSigVcdTrafficShaping

Module: Nortel-Magellan-Passport-AtmIispMIB

OID (symbolic): Nortel-Magellan-Passport-AtmIispMIB::atmIfIispSigVcdTrafficShaping

OID (numeric): 1.3.6.1.4.1.562.2.4.1.114.7.3.2.10.1.50

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This attribute specifies whether this connection uses traffic shaping when transmitting traffic to the ATM interface.

When sameAsCa is selected, traffic shaping for this connection is based on the trafficShaping attribute of the connection's service category component under the AtmIf CA. If the service category has traffic shaping enabled, then traffic shaping is enabled for the connection. Note that enabling traffic shaping may have no effect under certain cases. These cases are listed in the description of the trafficShaping operational attribute, which is under the Vcc Tm and Vpc Tm components.

When disabled is selected, traffic shaping for this connection is disabled.

What is atmIfIispSigVcdTrafficShaping?

Specifies whether this connection uses traffic shaping when transmitting to the ATM interface: disabled (the default) turns shaping off, while sameAsCa inherits the setting from the connection's service-category component. An admin uses sameAsCa to keep shaping consistent with the interface's overall connection-admission policy.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.7.3.2.10.1.50
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-AtmIispMIB::atmIfIispSigVcdTrafficShaping

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.114.7.3.2.10.1.50.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-AtmIispMIB::atmIfIispSigVcdTrafficShaping.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.562.2.4.1.114.7.3.2.10.1.50.1 i <value>

Start monitoring Nortel Magellan Passport ATM switch (IISP inter-switch signaling) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-AtmIispMIB::atmIfIispSigVcdTrafficShaping OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport ATM switch (IISP inter-switch signaling) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.114atmIfNortel-Magellan-Passport-AtmCoreMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.114.7atmIfIispNortel-Magellan-Passport-AtmIispMIB
1.3.6.1.4.1.562.2.4.1.114.7.3atmIfIispSigNortel-Magellan-Passport-AtmIispMIB
1.3.6.1.4.1.562.2.4.1.114.7.3.2atmIfIispSigVcdNortel-Magellan-Passport-AtmIispMIB
1.3.6.1.4.1.562.2.4.1.114.7.3.2.10atmIfIispSigVcdProvTableNortel-Magellan-Passport-AtmIispMIB
1.3.6.1.4.1.562.2.4.1.114.7.3.2.10.1atmIfIispSigVcdProvEntryNortel-Magellan-Passport-AtmIispMIB
1.3.6.1.4.1.562.2.4.1.114.7.3.2.10.1.50atmIfIispSigVcdTrafficShapingNortel-Magellan-Passport-AtmIispMIB