All MIBs › NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB › ifCfgPortSdslRxTxRate
ifCfgPortSdslRxTxRate
Module: NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
OID (symbolic): NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortSdslRxTxRate
OID (numeric): 1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: SDSL symetrical (Rx/Tx) data rates.
SDSL module types and the associated Rx/Tx data rates-
SAM1000-12: Data Rates (Kbps): 272,528,784,1168
SAM2000-12,SAM2000Q-12,SAM2000G-12,SAM2000D-12,SAM2000DQ-12, SIM2000-24,SuD2011_12T,SuD2011_12E,SuD2003_12T,SuD2003_12E, SuD2011_6T,SuD2011_6E,SuD2002_6T,SuD2002_6E: Data Rates (Kbps): 144,272,400,528,784,1040,1552,2064,2320
SAM2000V-12,SAM2000QV-12,SAM2000GV-12,SIM2000V-12,SIM2000V-24: Data Rates (Kbps): 272,400,528,784,1040,1552,2064,2320
Note: if a rate value of zero(0) is returned via a GET operation, it will indicate that the port is defective.
What is ifCfgPortSdslRxTxRate?
This read-write setting selects the SDSL port's symmetrical Rx/Tx rate from a module-dependent list ranging from 144 up to 2320 Kbps, or sdslRxTxRateOff to disable the port; a returned value of sdslRxTxRateDefect(0) indicates the port hardware is faulty. An admin picks the highest rate their specific SAM/SIM/SuD module and loop length can reliably support, since supported rate lists differ across the SDSL module variants documented in this object's own description.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.3 snmpwalk -v2c -c public <target> NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortSdslRxTxRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.3.1 snmpget -v2c -c public <target> NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortSdslRxTxRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.3.1 i <value>
Start monitoring Paradyne nTech DSLAMs/access multiplexers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortSdslRxTxRate OID value, configure state conditions and alerts, and monitor any Paradyne nTech DSLAMs/access multiplexers from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8059 | ntntechRootMIB | NTNTECH-ROOT-MIB |
| 1.3.6.1.4.1.8059.1 | ntntechNamingTree | NTNTECH-ROOT-MIB |
| 1.3.6.1.4.1.8059.1.2 | ntntechInterfaceModule | NTNTECH-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8059.1.2.1 | ntntechInterfaceModuleConfigurationMIB | NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB |
| 1.3.6.1.4.1.8059.1.2.1.1 | ifModCfgMIBObjects | NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB |
| 1.3.6.1.4.1.8059.1.2.1.1.1 | ifModCfgParameterConfiguration | NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB |
| 1.3.6.1.4.1.8059.1.2.1.1.1.2 | prmCfgInterfacePort | NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB |
| 1.3.6.1.4.1.8059.1.2.1.1.1.2.5 | ifCfgPortSdslTable | NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB |
| 1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1 | ifCfgPortSdslEntry | NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB |
| 1.3.6.1.4.1.8059.1.2.1.1.1.2.5.1.3 | ifCfgPortSdslRxTxRate | NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB |