NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB :: ifCfgPortFltrIp2Start

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIBifCfgPortFltrIp2Start

ifCfgPortFltrIp2Start

Module: NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB

OID (symbolic): NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortFltrIp2Start

OID (numeric): 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.6

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: The value assigned to a port which designates the start of the second Ip filter range.

What is ifCfgPortFltrIp2Start?

This read-write value sets the starting address of a second, independent IP filter range applied to a port. An admin uses this alongside the first filter range to allow filtering on two separate, non-contiguous address blocks on the same port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.6
snmpwalk -v2c -c public <target> NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortFltrIp2Start

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.6.1
snmpget -v2c -c public <target> NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortFltrIp2Start.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.6.1 a <value>

Start monitoring Paradyne nTech DSLAMs/access multiplexers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortFltrIp2Start OID value, configure state conditions and alerts, and monitor any Paradyne nTech DSLAMs/access multiplexers from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8059ntntechRootMIBNTNTECH-ROOT-MIB
1.3.6.1.4.1.8059.1ntntechNamingTreeNTNTECH-ROOT-MIB
1.3.6.1.4.1.8059.1.2ntntechInterfaceModuleNTNTECH-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8059.1.2.1ntntechInterfaceModuleConfigurationMIBNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1ifModCfgMIBObjectsNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1.1ifModCfgParameterConfigurationNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1.1.2prmCfgInterfacePortNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1.1.2.1ifCfgPortTableNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1ifCfgPortEntryNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1.1.2.1.1.6ifCfgPortFltrIp2StartNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB