NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB :: ifCfgPortE1RxTxRate

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIBifCfgPortE1RxTxRate

ifCfgPortE1RxTxRate

Module: NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB

OID (symbolic): NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortE1RxTxRate

OID (numeric): 1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: E1 symetrical (Rx/Tx) data rates.

E1 module types and the associated Rx/Tx data rates-

EAM2000-12,EIM2000-12,EIM2000-24: Data Rates (Kbps): 256,512,768,1024,1280,1536,1792,1984

Note: if a rate value of zero(0) is returned via a GET operation, it will indicate that the port is defective.

What is ifCfgPortE1RxTxRate?

This read-write setting selects the E1 port's symmetrical Rx/Tx rate, from 256 Kbps up to 1984 Kbps on EAM2000/EIM2000 modules, or e1RxTxRateOff to disable the port; a returned value of e1RxTxRateDefect(0) indicates the port hardware is faulty. An admin provisions this to the bandwidth the customer's E1-based circuit requires, up to just under the full 2048 Kbps E1 line rate.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.3
snmpwalk -v2c -c public <target> NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortE1RxTxRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.3.1
snmpget -v2c -c public <target> NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortE1RxTxRate.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.3.1 i <value>

Start monitoring Paradyne nTech DSLAMs/access multiplexers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB::ifCfgPortE1RxTxRate OID value, configure state conditions and alerts, and monitor any Paradyne nTech DSLAMs/access multiplexers from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8059ntntechRootMIBNTNTECH-ROOT-MIB
1.3.6.1.4.1.8059.1ntntechNamingTreeNTNTECH-ROOT-MIB
1.3.6.1.4.1.8059.1.2ntntechInterfaceModuleNTNTECH-ROOT-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8059.1.2.1ntntechInterfaceModuleConfigurationMIBNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1ifModCfgMIBObjectsNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1.1ifModCfgParameterConfigurationNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1.1.2prmCfgInterfacePortNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1.1.2.7ifCfgPortE1TableNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1ifCfgPortE1EntryNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB
1.3.6.1.4.1.8059.1.2.1.1.1.2.7.1.3ifCfgPortE1RxTxRateNTNTECH-INTERFACE-MODULE-CONFIGURATION-MIB