All MIBs › NTN-QOS-POLICY-AUX-MIB › ntnQosConfigPolicyCfgRestrictionMode
ntnQosConfigPolicyCfgRestrictionMode
Module: NTN-QOS-POLICY-AUX-MIB
OID (symbolic): NTN-QOS-POLICY-AUX-MIB::ntnQosConfigPolicyCfgRestrictionMode
OID (numeric): 1.3.6.1.4.1.45.4.5.1.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies whether policies referencing IP filter criteria can be defined by the user. The value of this attribute determines if new IP filter-based policies can be installed. If the value of this attribute is 'noPolicyRestrictions(1)', both IP and Layer 2-based policies can be installed. If the value is 'l3PolicyRestrictions(2)', only Layer 2-based policies can be installed.
This attribute is only consulted when traffic separation mode is enabled.
Modification of this attribute may be restricted based on the interface used (e.g., CLI) for the modification.
What is ntnQosConfigPolicyCfgRestrictionMode?
When traffic separation mode is enabled, controls whether IP-filter-based QoS policies may be installed at all: noPolicyRestrictions(1) allows both IP and Layer-2 policies, while l3PolicyRestrictions(2) permits only Layer-2-based policies.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.4.5.1.1.8 snmpwalk -v2c -c public <target> NTN-QOS-POLICY-AUX-MIB::ntnQosConfigPolicyCfgRestrictionMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.4.5.1.1.8.1 snmpget -v2c -c public <target> NTN-QOS-POLICY-AUX-MIB::ntnQosConfigPolicyCfgRestrictionMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.4.5.1.1.8.1 i <value>
Start monitoring Nortel Networks routers/switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NTN-QOS-POLICY-AUX-MIB::ntnQosConfigPolicyCfgRestrictionMode OID value, configure state conditions and alerts, and monitor any Nortel Networks routers/switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.4 | policy | SYNOPTICS-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.4.5 | ntnQosPolicyAuxMib | NTN-QOS-POLICY-AUX-MIB |
| 1.3.6.1.4.1.45.4.5.1 | ntnQosPolicyAuxObjects | NTN-QOS-POLICY-AUX-MIB |
| 1.3.6.1.4.1.45.4.5.1.1 | ntnQosConfig | NTN-QOS-POLICY-AUX-MIB |
| 1.3.6.1.4.1.45.4.5.1.1.8 | ntnQosConfigPolicyCfgRestrictionMode | NTN-QOS-POLICY-AUX-MIB |