All MIBs › NTN-QOS-POLICY-AUX-MIB › ntnQosConfigDynamicMgmt
ntnQosConfigDynamicMgmt
Module: NTN-QOS-POLICY-AUX-MIB
OID (symbolic): NTN-QOS-POLICY-AUX-MIB::ntnQosConfigDynamicMgmt
OID (numeric): 1.3.6.1.4.1.45.4.5.1.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies whether dynamic management (e.g., COPS-PR) is currently enabled. Devices may limit support for dynamic management by providing read-only access to this object. If enabled, dynamic management always takes precedence over static management such that static management may only be used for monitoring of objects that have a POLICY-ACCESS clause of 'install' or 'install-notify' in the respective PIB module.
Disabling dynamic management causes Delete Request State (DRQ) and Client Close (CC) messages to be generated if a connection between the PEP and a PDP is currently established. Installed policies are not automatically deleted. Enabling dynamic management will initiate the COPS-PR connect sequence and, potentailly, the loading of policy information.
What is ntnQosConfigDynamicMgmt?
Enables or disables dynamic QoS policy management via COPS-PR; when enabled it always takes precedence over statically configured policy, and disabling it tears down any active PEP-to-PDP connection (sending Delete Request State and Client Close) without removing already-installed policies.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.45.4.5.1.1.1 snmpwalk -v2c -c public <target> NTN-QOS-POLICY-AUX-MIB::ntnQosConfigDynamicMgmt
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.45.4.5.1.1.1.1 snmpget -v2c -c public <target> NTN-QOS-POLICY-AUX-MIB::ntnQosConfigDynamicMgmt.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.45.4.5.1.1.1.1 i <value>
Start monitoring Nortel Networks routers/switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NTN-QOS-POLICY-AUX-MIB::ntnQosConfigDynamicMgmt OID value, configure state conditions and alerts, and monitor any Nortel Networks routers/switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.45 | synoptics | SYNOPTICS-ROOT-MIB |
| 1.3.6.1.4.1.45.4 | policy | SYNOPTICS-ROOT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.45.4.5 | ntnQosPolicyAuxMib | NTN-QOS-POLICY-AUX-MIB |
| 1.3.6.1.4.1.45.4.5.1 | ntnQosPolicyAuxObjects | NTN-QOS-POLICY-AUX-MIB |
| 1.3.6.1.4.1.45.4.5.1.1 | ntnQosConfig | NTN-QOS-POLICY-AUX-MIB |
| 1.3.6.1.4.1.45.4.5.1.1.1 | ntnQosConfigDynamicMgmt | NTN-QOS-POLICY-AUX-MIB |