All MIBs › NSCRTV-FTTX-EPON-MIB
Description: Root MIB defining textual conventions, alarm codes, severity types, and alarm instance encoding for NSCRTV FTTx EPON OLT/ONU access network systems
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is NSCRTV-FTTX-EPON-MIB?
NSCRTV-FTTX-EPON-MIB is the vendor's root/foundation MIB module for its FTTx EPON access network product line, defining shared textual conventions, alarm codes, severity types, and the encoding scheme used to identify specific alarm instances across the rest of the NSCRTV EPON MIB family. Rather than exposing runtime counters directly, this module's role is structural: it establishes the common data types (alarm code enumerations, severity levels, alarm instance identifiers) that other NSCRTV MIBs (system, VLAN management, optical transmitter) reference when reporting faults. Its value for monitoring is therefore indirect but foundational to fault/software status monitoring, since it defines how alarm severity (e.g., critical/major/minor) and alarm type codes are represented so that OLT/ONU alarm conditions raised elsewhere in the MIB family can be interpreted consistently by a management system. It is explicitly a dependency root for the other NSCRTV-* EPON MIB modules in this batch (system, VLAN, optical transmitter), which import its textual conventions. It is deployed alongside the rest of the NSCRTV EPON OLT/ONU MIB suite on FTTx access network equipment. Engineers can download the NSCRTV-FTTX-EPON-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in NSCRTV-FTTX-EPON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- NSCRTV EPON OLT/ONU FTTx access network equipment
Monitoring Examples
This module defines textual conventions (alarm/severity code types) rather than instantiable runtime objects or tables, so it is best understood as a conformance/definitions module; no sample objects were provided and none would be expected to represent a live monitoring scenario on their own. Other NSCRTV MIBs that import these alarm/severity types would be the ones actually polled or trapped for real fault conditions.
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| BridgeId | |
| Timeout |
From SNMPv2-SMI
| BITS | |
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| IpAddress | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using activeAlarmRepeats OID:
Select an NSCRTV EPON OLT/ONU FTTx access network equipment (shared alarm conventions) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type activeAlarmRepeats into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of repeated alarms for this active alarm entry. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| nscrtvRoot | 1.3.6.1.4.1.17409 | |||
| nscrtvHFCemsTree | 1.3.6.1.4.1.17409.1 | |||
| nscrtvEponEocTree | 1.3.6.1.4.1.17409.2 | |||
| propertyIdent | 1.3.6.1.4.1.17409.2.1 | |||
| alarmsIdent | 1.3.6.1.4.1.17409.2.2 | |||
| eponAlarmTree | 1.3.6.1.4.1.17409.2.2.11 | |||
| eponTrapObjectGroup | 1.3.6.1.4.1.17409.2.2.11.1 | |||
| eponNotifications | 1.3.6.1.4.1.17409.2.2.11.1.1 | |||
| NTF eponAlarmNotification | 1.3.6.1.4.1.17409.2.2.11.1.1.1 | Alarm TRAP definition | ||
| NTF eponEventNotification | 1.3.6.1.4.1.17409.2.2.11.1.1.2 | Event TRAP definition | ||
| eponTrapObjects | 1.3.6.1.4.1.17409.2.2.11.1.2 | |||
| EPO eponTrapInstance | 1.3.6.1.4.1.17409.2.2.11.1.2.1 | EponAlarmInstance | accessible-for-notify | Alarm instance, indicates the detailed managed object, which detects faults. |
| U32 eponTrapCorrelationId | 1.3.6.1.4.1.17409.2.2.11.1.2.2 | Unsigned32 | accessible-for-notify | The unique sequence number for the alarm to be cleared, for alarm clearing. Set to 0 for alarm reporting |
| OCT eponTrapAdditionalText | 1.3.6.1.4.1.17409.2.2.11.1.2.3 | OCTET STRING | accessible-for-notify | Additional info to the alarm, for further desciption of the alarm. The format of it shall be related to each kind alarm defined in alarm reference table |
| EPO eponTrapCode | 1.3.6.1.4.1.17409.2.2.11.1.2.4 | EponAlarmCode | accessible-for-notify | C |
| EPO eponTrapSeverity | 1.3.6.1.4.1.17409.2.2.11.1.2.5 | EponSeverityType | accessible-for-notify | |
| DAT eponTrapOccurTime | 1.3.6.1.4.1.17409.2.2.11.1.2.6 | DateAndTime | accessible-for-notify | |
| U32 eponTrapSequenceNumber | 1.3.6.1.4.1.17409.2.2.11.1.2.7 | Unsigned32 | accessible-for-notify | A unique sequence number for each trap generated by node. The sequence number shall be reset to 1 when node restarts. The alarm sequence number shall be independent of the event sequence number. Each shall be self-governed. -------------------------------------------------------------------------------- The sequence ID of alarm shall be assigned from the order of transmitting trap to the NMS, instead of the order of alarm occurance. Therefore the NMS will receive the continuous sequence ID. 1. When device is in active/standby mode, sequence ID shall be synchronized between active and standby control module. 2. When control module switchover takes place, the current sequence ID shall keep the synchronized value. 3. When device restarts, sequence ID shall start from 1. 4. It shall be increased per alarm trap including both alarm raising and clear. 5. Non-zero value shall be used. When reaches the maximum number, it shall roll back to 1. -------------------------------------------------------------------------------- The sequence ID of event shall be assigned from the order of transmitting trap to the NMS. Therefore the NMS will receive the continuous sequence ID. 1. When device is in active/standby mode, sequence ID shall be synchronized between active and standby control module. 2. When control module switchover takes place, the current sequence ID shall keep the synchronized value. 3. When device restarts, sequence ID shall start from 1. 4. It shall be increased per event trap. 5. Non-zero value shall be used. When reaches the maximum number, it shall roll back to 1. |
| eponAlarmObjGroup | 1.3.6.1.4.1.17409.2.2.11.2 | |||
| activeAlarmTable | 1.3.6.1.4.1.17409.2.2.11.2.1 | not-accessible | Active alarm table The device shall maintain this table, to maintain all outstanding (not cleared) alarms generated by the device, including: 1. Not hit device local alarm filter. That means had been reported to trap receiver (NMS or EMS) 2. Hit local alarm filter. That means not trap is reported to trap receiver for the alarm. The device shall maintain two numbers: 1. Alarm sequence number: As described in eponTrapSequenceNumber, it is initially set to 1 when device restarts, increases per trap reported to trap receiver, and rollover to 1 once it reaches the maximum value. From NMS's view, traps received from a nodes will be consecutive, by identifying the alarm sequence number carried in alarm trap. If breaks, means some trap may be lost, since packet loss between NMS and NE. 2. Alarm raising number: This is maintained by NE internally and does not intend for being acknowledged by external manage system. It is designed to uniquely indentify each alarm raised by NE, excluding duplicates. Once one alarm raised, despite whether it is hit by alarm filter, NE shall assign a raising number to it. So, it major functionality is to uniquely identify alarms hit NE local alarm filter, since this kindly alarm will not be reported to NMS, and hence no alarm sequence number is assigned to it. It is initially set to 1 when device restarts, increases per alarm generation ( excluding duplicates), and rollover to 1 once it reaches the maximum value. FUNCTION DESCRIPTION OF ACTIVE ALARM TABLE: ALARM RAISING ---------------------- 1. When NE detects one fault and associates to one kind of alarm, it shall check whether there is same alarm in active alarm table, which is indexed by alarm code and alarm instance. If hits, it means duplicates, update the corresponding entry of the table. Otherwise, 2. The alarm is not a duplicate. Assign an alarm raising number. Check whether the alarm hits local alarm filters. If hits, set alarm sequence number to 0. Create an entry into active alarm table. Otherwise, 3. Assign an alarm sequence number to the alarm. Create an entry into active alarm table. Report the alarm trap to all trap receivers. ALARM CLEARING ---------------------- 1. When NE detects one fault is cleared and associates to one kind of alarm, it shall check whether there is corresponding alarm in active alarm table, which is indexed by alarm code and alarm instance. If no hit, escape this clear event. Upon a hit, if the alarm sequence number is 0, move the active alarm entry to history alarm table and update the corresponding fields. At this case, historyAlarmCorrelationId and historyAlarmSeqNum will be set to 0. Otherwise, 2. Assign an alarm sequence number to the clear trap. Report the alarm clear trap to all trap receivers. Move the active alarm entry to history alarm table and update the corresponding fields. At this case, activeAlarmSeqNum shall be copied to historyAlarmCorrelationId, and historyAlarmSeqNum shall be set to the new alarm sequence number for the clear trap. ALARM SYNCHRONIZATION BETWEEN NE AND NMS --------------------------------------------- 1. Once NMS finds the alarm sequence number in reported alarm traps is not continuous, it will walk active or history alarm table of the NE for the lost seuqence number. | |
| activeAlarmEntry | 1.3.6.1.4.1.17409.2.2.11.2.1.1 | not-accessible | ||
| U32 activeAlarmSeqNum | 1.3.6.1.4.1.17409.2.2.11.2.1.1.1 | Unsigned32 | not-accessible | Alarm sequence number The definition refered to the description of activeAlarmTable |
| EPO activeAlarmCode | 1.3.6.1.4.1.17409.2.2.11.2.1.1.2 | EponAlarmCode | read-only | C |
| EPO activeAlarmInstance | 1.3.6.1.4.1.17409.2.2.11.2.1.1.3 | EponAlarmInstance | read-only | Alarm instance, indicates the detailed managed object |
| EPO activeAlarmSeverity | 1.3.6.1.4.1.17409.2.2.11.2.1.1.4 | EponSeverityType | read-only | |
| U32 activeAlarmRaisingNumber | 1.3.6.1.4.1.17409.2.2.11.2.1.1.5 | Unsigned32 | not-accessible | Alarm raising number. The definition refered to the description of activeAlarmTable |
| DAT activeAlarmFirstOccurTime | 1.3.6.1.4.1.17409.2.2.11.2.1.1.6 | DateAndTime | read-only | The time stamp when alarm occurs, which triggered to create the active alarm entry. |
| DAT activeAlarmLastOccurTime | 1.3.6.1.4.1.17409.2.2.11.2.1.1.7 | DateAndTime | read-only | The time stamp when alarm occurs, where the alarm is duplicated with existed active alarm entry, and it was the latest one. |
| C32 activeAlarmRepeatsEx | 1.3.6.1.4.1.17409.2.2.11.2.1.1.8 | Counter32 | read-only | Number of repeated alarms for this active alarm entry |
| T/F activeAlarmConfirm | 1.3.6.1.4.1.17409.2.2.11.2.1.1.9 | TruthValue | read-write | Node shall not clear an active alarm, upon the confirmation of the active alarm, but just mark an acknowledged status. An alarm will only be cleared once the clear condition hits. |
| OCT activeAlarmAdditionalText | 1.3.6.1.4.1.17409.2.2.11.2.1.1.10 | OCTET STRING | read-only | Additional info to the alarm, for further desciption of the alarm. The format of it shall be related to each kind alarm defined in alarm reference table |
| historyAlarmTable | 1.3.6.1.4.1.17409.2.2.11.2.2 | not-accessible | History alarm table. The device shall maintain this table, to maintain all cleared alarms generated by the device, including: 1. Not hit device local alarm filter. That means had been reported to trap receiver (NMS or EMS) 2. Hit local alarm filter. That means not trap is reported to trap receiver for the alarm. The number of history alarm enteries in the table could be device-specific. However, it is recommended no less than 200 entries. The detailed function definition refers to that given in description of activeAlarmTable. | |
| historyAlarmEntry | 1.3.6.1.4.1.17409.2.2.11.2.2.1 | not-accessible | ||
| U32 historyAlarmSeqNum | 1.3.6.1.4.1.17409.2.2.11.2.2.1.1 | Unsigned32 | not-accessible | Alarm sequence number The definition refered to the description of historyAlarmTable |
| EPO historyAlarmCode | 1.3.6.1.4.1.17409.2.2.11.2.2.1.2 | EponAlarmCode | read-only | C |
| EPO historyAlarmInstance | 1.3.6.1.4.1.17409.2.2.11.2.2.1.3 | EponAlarmInstance | read-only | Alarm instance, indicates the detailed managed object |
| EPO historyAlarmSeverity | 1.3.6.1.4.1.17409.2.2.11.2.2.1.4 | EponSeverityType | read-only | |
| U32 historyAlarmRaisingNumber | 1.3.6.1.4.1.17409.2.2.11.2.2.1.5 | Unsigned32 | not-accessible | Alarm raising number. The definition refered to the description of historyAlarmTable |
| DAT historyAlarmFirstOccurTime | 1.3.6.1.4.1.17409.2.2.11.2.2.1.6 | DateAndTime | read-only | The time stamp when alarm occurs, which triggered to create the history alarm entry. |
| DAT historyAlarmLastOccurTime | 1.3.6.1.4.1.17409.2.2.11.2.2.1.7 | DateAndTime | read-only | The time stamp when alarm occurs, where the alarm is duplicated with existed history alarm entry, and it was the latest one. |
| C32 historyAlarmRepeats | 1.3.6.1.4.1.17409.2.2.11.2.2.1.8 | Counter32 | read-only | Number of repeated alarms for this history alarm entry |
| U32 historyAlarmCorrelationId | 1.3.6.1.4.1.17409.2.2.11.2.2.1.9 | Unsigned32 | read-only | It is the corresponding sequence ID of the alarm that to be cleared. |
| OCT historyAlarmAdditionalText | 1.3.6.1.4.1.17409.2.2.11.2.2.1.10 | OCTET STRING | read-only | Additional info to the alarm, for further desciption of the alarm. The format of it shall be related to each kind alarm defined in alarm reference table |
| DAT historyAlarmClearTime | 1.3.6.1.4.1.17409.2.2.11.2.2.1.11 | DateAndTime | read-only | Define when the alarm was cleared |
| eventLogTable | 1.3.6.1.4.1.17409.2.2.11.2.3 | not-accessible | Event log table. The device shall maintain this table, to maintain all events had be reported by the device, including: 1. The event table shall be saved in RAM memory and shall be flushed when OLT restarts. 2. The event log table shall support no less than 200 entries. When the event log table is full, the oldest entry in the table shall be removed first. 3. When OLT is configured with control module redundancy, active controller shall automatically synchronize the events in event log table b/w active and standby. | |
| eventLogEntry | 1.3.6.1.4.1.17409.2.2.11.2.3.1 | not-accessible | ||
| U32 eventSeqNum | 1.3.6.1.4.1.17409.2.2.11.2.3.1.1 | Unsigned32 | not-accessible | Event sequence number The definition refered to the description of eponTrapSequenceNumber |
| EPO eventCode | 1.3.6.1.4.1.17409.2.2.11.2.3.1.2 | EponAlarmCode | read-only | C |
| EPO eventInstance | 1.3.6.1.4.1.17409.2.2.11.2.3.1.3 | EponAlarmInstance | read-only | Event instance, indicates the detailed managed object |
| DAT eventOccurTime | 1.3.6.1.4.1.17409.2.2.11.2.3.1.4 | DateAndTime | read-only | The time stamp when event occurs |
| OCT eventAdditionalText | 1.3.6.1.4.1.17409.2.2.11.2.3.1.5 | OCTET STRING | read-only | Additional info to the event, for further desciption of the event. The format of it shall be related to each kind event defined in event reference table |
| eponManagementObjGroup | 1.3.6.1.4.1.17409.2.2.11.3 | |||
| eponManagementAddrTable | 1.3.6.1.4.1.17409.2.2.11.3.1 | not-accessible | A table of transport addresses to be used in the generation of SNMP messages. | |
| eponManagementAddrEntry | 1.3.6.1.4.1.17409.2.2.11.3.1.1 | not-accessible | A transport address to be used in the generation of SNMP operations. Entries in the snmpTargetAddrTable are created and deleted using the snmpTargetAddrRowStatus object. | |
| OCT eponManagementAddrName | 1.3.6.1.4.1.17409.2.2.11.3.1.1.1 | OCTET STRING | not-accessible | EMS |
| ADR eponManagementAddrTAddress | 1.3.6.1.4.1.17409.2.2.11.3.1.1.2 | TAddress | read-create | TRAP UDP |
| OCT eponManagementAddrCommunity | 1.3.6.1.4.1.17409.2.2.11.3.1.1.3 | OCTET STRING | read-create | TRAPCommunity |
| ROW eponManagementAddrRowStatus | 1.3.6.1.4.1.17409.2.2.11.3.1.1.4 | RowStatus | read-create | EPON |
| eponTree | 1.3.6.1.4.1.17409.2.3 | |||
| systemObjects | 1.3.6.1.4.1.17409.2.3.1 | |||
| systemGlobalObjects | 1.3.6.1.4.1.17409.2.3.1.1 | |||
| DAT systemTime | 1.3.6.1.4.1.17409.2.3.1.1.1 | DateAndTime | read-write | 8 |
| IP inbandIpAddress | 1.3.6.1.4.1.17409.2.3.1.1.2 | IpAddress | read-write | IP |
| IP inbandIpSubnetMask | 1.3.6.1.4.1.17409.2.3.1.1.3 | IpAddress | read-write | IP |
| IP inbandIpGateway | 1.3.6.1.4.1.17409.2.3.1.1.4 | IpAddress | read-write | IP |
| INT inbandVlanId | 1.3.6.1.4.1.17409.2.3.1.1.5 | INTEGER | read-write | VLAN ID. VLANVLAN |
| MAC inbandMacAddress | 1.3.6.1.4.1.17409.2.3.1.1.6 | MacAddress | read-only | MAC. |
| IP outbandIpAddress | 1.3.6.1.4.1.17409.2.3.1.1.7 | IpAddress | read-write | IP |
| IP outbandIpSubnetMask | 1.3.6.1.4.1.17409.2.3.1.1.8 | IpAddress | read-write | IP |
| IP outbandIpGateway | 1.3.6.1.4.1.17409.2.3.1.1.9 | IpAddress | read-write | IP |
| MAC outbandMacAddress | 1.3.6.1.4.1.17409.2.3.1.1.10 | MacAddress | read-only | MAC |
| OCT systemOUI | 1.3.6.1.4.1.17409.2.3.1.1.11 | OCTET STRING | read-only | OUI |
| STR vendorName | 1.3.6.1.4.1.17409.2.3.1.1.12 | DisplayString | read-only | Vender name of the OLT equipment |
| STR devSn | 1.3.6.1.4.1.17409.2.3.1.1.13 | DisplayString | read-only | Serial number of the OLT equipment |
| INT saveConfig | 1.3.6.1.4.1.17409.2.3.1.1.14 | INTEGER | read-write | Save device configuration when set value to 1. |
| INT saveConfigStatus | 1.3.6.1.4.1.17409.2.3.1.1.15 | INTEGER | read-only | Save device configuration status |
| oltObjects | 1.3.6.1.4.1.17409.2.3.1.2 | OLT | ||
| oltPropertyTable | 1.3.6.1.4.1.17409.2.3.1.2.1 | not-accessible | OLT | |
| oltPropertyEntry | 1.3.6.1.4.1.17409.2.3.1.2.1.1 | not-accessible | ||
| INT oltDeviceIndex | 1.3.6.1.4.1.17409.2.3.1.2.1.1.1 | INTEGER | read-only | OLT OLTOLTOLTOLT |
| STR oltName | 1.3.6.1.4.1.17409.2.3.1.2.1.1.2 | DisplayString | read-write | OLT |
| STR oltType | 1.3.6.1.4.1.17409.2.3.1.2.1.1.3 | DisplayString | read-only | OLT |
| INT oltAdminStatus | 1.3.6.1.4.1.17409.2.3.1.2.1.1.4 | INTEGER | read-write | OLT up(1) - down(2) - testing(3) - |
| TIM oltDeviceUpTime | 1.3.6.1.4.1.17409.2.3.1.2.1.1.5 | TimeStamp | read-only | OLT |
| INT oltDeviceNumOfTotalServiceSlot | 1.3.6.1.4.1.17409.2.3.1.2.1.1.6 | INTEGER | read-only | Total number of service slots in the OLT device, including service card, switch card, control card, uplink card, etc. but except power, FAN, regardless whether the slot is installed module |
| INT oltDeviceNumOfTotalPowerSlot | 1.3.6.1.4.1.17409.2.3.1.2.1.1.7 | INTEGER | read-only | Total number of power slots in the OLT device, regardless whether the slot is installed module |
| INT oltDeviceNumOfTotalFanSlot | 1.3.6.1.4.1.17409.2.3.1.2.1.1.8 | INTEGER | read-only | Total number of FAN slots in the OLT device, regardless whether the slot is installed module |
| INT oltDeviceStyle | 1.3.6.1.4.1.17409.2.3.1.2.1.1.9 | INTEGER | read-only | The device stype of either fixed or chassis based fixed(1) - such as pizza box chassisBased(2) - Have number of slots for installing service card, power card, etc. |
| boardObjects | 1.3.6.1.4.1.17409.2.3.1.3 | |||
| boardTable | 1.3.6.1.4.1.17409.2.3.1.3.1 | not-accessible | OLT This table shall include rows for all slots, including the slots has a presence state of 'NotInstalled'. | |
| boardEntry | 1.3.6.1.4.1.17409.2.3.1.3.1.1 | not-accessible | ||
| INT bDeviceIndex | 1.3.6.1.4.1.17409.2.3.1.3.1.1.1 | INTEGER | not-accessible | OLT OLTOLTOLTOLT |
| EPO bCardIndex | 1.3.6.1.4.1.17409.2.3.1.3.1.1.2 | EponCardIndex | not-accessible | |
| INT bType | 1.3.6.1.4.1.17409.2.3.1.3.1.1.3 | INTEGER | read-only | controlBoard(1) - geponBoard(2) - GE EPON uplinkBoard(3) - switchBoard(4) - other(5) - vacant(6) - |
| INT bAttribute | 1.3.6.1.4.1.17409.2.3.1.3.1.1.4 | INTEGER | read-only | - active(1) - standby(2) - standalone(3) - OLT notApplicable(4) - |
| INT bOperationStatus | 1.3.6.1.4.1.17409.2.3.1.3.1.1.5 | INTEGER | read-only | up(1) - down(2) - testing(3) - |
| INT bAdminStatus | 1.3.6.1.4.1.17409.2.3.1.3.1.1.6 | INTEGER | read-write | up(1) - down(2) - testing(3) - |
| STR bHardwareVersion | 1.3.6.1.4.1.17409.2.3.1.3.1.1.7 | DisplayString | read-only | |
| STR bFirmwareVersion | 1.3.6.1.4.1.17409.2.3.1.3.1.1.8 | DisplayString | read-only | |
| STR bSoftwareVersion | 1.3.6.1.4.1.17409.2.3.1.3.1.1.9 | DisplayString | read-only | |
| TIM bUpTime | 1.3.6.1.4.1.17409.2.3.1.3.1.1.10 | TimeStamp | read-only | |
| BIT bAlarmStatus | 1.3.6.1.4.1.17409.2.3.1.3.1.1.11 | Bits | read-only | |
| STR bSerialNumber | 1.3.6.1.4.1.17409.2.3.1.3.1.1.12 | DisplayString | read-only | SN |
| INT bAction | 1.3.6.1.4.1.17409.2.3.1.3.1.1.13 | INTEGER | read-write | noAction(1) - switchover(2) - upgrade(3) - |
| OCT bName | 1.3.6.1.4.1.17409.2.3.1.3.1.1.14 | OCTET STRING | read-only | The board name defined by vendor individual |
| INT bPresenceStatus | 1.3.6.1.4.1.17409.2.3.1.3.1.1.15 | INTEGER | read-only | The physical presence status of the slot |
| powerObjects | 1.3.6.1.4.1.17409.2.3.1.4 | |||
| powerPropertyTable | 1.3.6.1.4.1.17409.2.3.1.4.1 | not-accessible | ||
| powerPropertyEntry | 1.3.6.1.4.1.17409.2.3.1.4.1.1 | not-accessible | ||
| INT powerDeviceIndex | 1.3.6.1.4.1.17409.2.3.1.4.1.1.1 | INTEGER | not-accessible | OLT OLTOLTOLTOLT |
| EPO powerCardIndex | 1.3.6.1.4.1.17409.2.3.1.4.1.1.2 | EponCardIndex | not-accessible | |
| INT powerCardOperationStatus | 1.3.6.1.4.1.17409.2.3.1.4.1.1.3 | INTEGER | read-only | up(1) - down(2) - testing(3) - |
| BIT powerCardAlarmStatus | 1.3.6.1.4.1.17409.2.3.1.4.1.1.4 | Bits | read-only | |
| INT powerCardAction | 1.3.6.1.4.1.17409.2.3.1.4.1.1.5 | INTEGER | read-write | noAction(1) - switchover(2) - Note: Switchover(2) shall be only set to the power board with powerCardRedundancyStatus of active(1) |
| OCT powerCardName | 1.3.6.1.4.1.17409.2.3.1.4.1.1.6 | OCTET STRING | read-only | The power card name defined by vendor individual |
| INT powerCardPresenceStatus | 1.3.6.1.4.1.17409.2.3.1.4.1.1.7 | INTEGER | read-only | The physical presence status of the power slot |
| INT powerCardRedundancyStatus | 1.3.6.1.4.1.17409.2.3.1.4.1.1.8 | INTEGER | read-only | The redundancy status of the power card active(1) - The power card is working on redundanct active/ Standby mode and the current role is active. stanby(2) - The power card is working on redundanct active/ Standby mode and the current role is standby. standalone(3) - The power card is not working on redundanct mode and the current role is standalone. loadShareing(4) - The power card is working on redundanct loadsharing mode. |
| fanObjects | 1.3.6.1.4.1.17409.2.3.1.5 | |||
| fanPropertyTable | 1.3.6.1.4.1.17409.2.3.1.5.1 | not-accessible | ||
| fanPropertyEntry | 1.3.6.1.4.1.17409.2.3.1.5.1.1 | not-accessible | ||
| INT fanDeviceIndex | 1.3.6.1.4.1.17409.2.3.1.5.1.1.1 | INTEGER | not-accessible | OLT OLTOLTOLTOLT |
| EPO fanCardIndex | 1.3.6.1.4.1.17409.2.3.1.5.1.1.2 | EponCardIndex | not-accessible | |
| INT fanCardOperationStatus | 1.3.6.1.4.1.17409.2.3.1.5.1.1.3 | INTEGER | read-only | up(1) - down(2) - testing(3) - |
| BIT fanCardAlarmStatus | 1.3.6.1.4.1.17409.2.3.1.5.1.1.4 | Bits | read-only | |
| OCT fanCardName | 1.3.6.1.4.1.17409.2.3.1.5.1.1.5 | OCTET STRING | read-only | The FAN card name defined by vendor individual |
| INT fanCardPresenceStatus | 1.3.6.1.4.1.17409.2.3.1.5.1.1.6 | INTEGER | read-only | The physical presence status of the FAN card slot |
| fileTransferManagement | 1.3.6.1.4.1.17409.2.3.1.6 | |||
| fileTransferTable | 1.3.6.1.4.1.17409.2.3.1.6.1 | not-accessible | ||
| fileTransferEntry | 1.3.6.1.4.1.17409.2.3.1.6.1.1 | not-accessible | ||
| INT fileTransferIndex | 1.3.6.1.4.1.17409.2.3.1.6.1.1.1 | INTEGER | not-accessible | |
| INT fileTransferProtocolType | 1.3.6.1.4.1.17409.2.3.1.6.1.1.2 | INTEGER | read-write | |
| IP serverIpAddress | 1.3.6.1.4.1.17409.2.3.1.6.1.1.3 | IpAddress | read-write | IP |
| STR ftpUserName | 1.3.6.1.4.1.17409.2.3.1.6.1.1.4 | DisplayString | read-write | FTP |
| STR ftpUserPassword | 1.3.6.1.4.1.17409.2.3.1.6.1.1.5 | DisplayString | read-write | FTP |
| STR transferFileSrcNamePath | 1.3.6.1.4.1.17409.2.3.1.6.1.1.6 | DisplayString | read-write | '/tftproot/file/image.bin |
| STR transferFileDstNamePath | 1.3.6.1.4.1.17409.2.3.1.6.1.1.7 | DisplayString | read-write | '/tftproot/file/image.bin |
| INT transferAction | 1.3.6.1.4.1.17409.2.3.1.6.1.1.8 | INTEGER | read-write | noOperation(1) - put(2) - get(3) - halt(4) - |
| INT transferStatus | 1.3.6.1.4.1.17409.2.3.1.6.1.1.9 | INTEGER | read-only | idle(1) - inProgress(2) - success(3) - failure(4) - |
| fileInfoManagementTable | 1.3.6.1.4.1.17409.2.3.1.6.2 | not-accessible | OLT It is done by file list per directionary. Please walk filePath for the file lists in the specified path. If leave it NULL or walk fileInfoManagementEntry, the file list of the root directionary shall be returned | |
| fileInfoManagementEntry | 1.3.6.1.4.1.17409.2.3.1.6.2.1 | not-accessible | ||
| STR filePath | 1.3.6.1.4.1.17409.2.3.1.6.2.1.1 | DisplayString | not-accessible | File path It shall be started with a length octet, followed with path string. The length octet shall indicate the number of character octets, excluding length itself. For example, 0x05 41 42 43 44 45, respresents ABCDE It shall be ended with '/', which is used to distinguish the two DisplayString indexes. For example, if the path is flash/root, filePath shall be set to flash/root/. |
| STR fileName | 1.3.6.1.4.1.17409.2.3.1.6.2.1.2 | DisplayString | not-accessible | File name. MUST not include '/' character and MUST not be NULL. It shall be started with a length octet, followed with name string. The length octet shall indicate the number of character octets, excluding length itself. For example, 0x05 41 42 43 44 45, respresents ABCDE |
| C32 fileSize | 1.3.6.1.4.1.17409.2.3.1.6.2.1.3 | Counter32 | read-only | |
| DAT fileModifyTime | 1.3.6.1.4.1.17409.2.3.1.6.2.1.4 | DateAndTime | read-only | |
| INT fileManagementAction | 1.3.6.1.4.1.17409.2.3.1.6.2.1.5 | INTEGER | read-write | noOperation(1) - erase(2) - |
| INT fileAttribute | 1.3.6.1.4.1.17409.2.3.1.6.2.1.6 | INTEGER | read-only | The attribute of the file |
| onuBatchUpgradeTable | 1.3.6.1.4.1.17409.2.3.1.7 | not-accessible | ONU\u6279\u5904\u7406\u5347\u7ea7\u8868,\u5177\u4f53\u5b9e\u73b0\u6d41\u7a0b\u89c1\u9644\u5f55A.1 | |
| onuBatchUpgradeEntry | 1.3.6.1.4.1.17409.2.3.1.7.1 | not-accessible | ||
| INT onuBatchUpgradeIndex | 1.3.6.1.4.1.17409.2.3.1.7.1.1 | INTEGER | not-accessible | onu\u5347\u7ea7\u64cd\u4f5c\u7d22\u5f15,OLT\u5382\u5546\u6839\u636eOLT\u5bf9ONU\u5347\u7ea7\u7684\u5e76\u884c\u80fd\u529b,\u5efa\u7acb\u4e00\u5b9a\u6570\u91cf\u7684\u5347\u7ea7\u64cd\u4f5c\u9879,\u81f3\u5c11\u4e3a1,\u4e0d\u5f3a\u5236\u8981\u6c42\u5e76\u884c\u5347\u7ea7\u591a\u7c7b\u578bONU,\u5141\u8bb8\u4e32\u884c\u65b9\u5f0f\u6267\u884c |
| OCT onuBatchUpgradeOnuList | 1.3.6.1.4.1.17409.2.3.1.7.1.2 | OCTET STRING | read-write | Onu\u5217\u8868,\u6bcf4byte\u8868\u793a\u4e00\u4e2aonu(\u53c2\u7167EponDeviceIndex),\u957f\u5ea6\u4e3a4 * (onu\u4e2a\u6570),\u6700\u5927\u957f\u5ea6\u662f4*256 |
| INT onuBatchUpgradeAction | 1.3.6.1.4.1.17409.2.3.1.7.1.3 | INTEGER | read-write | \u5199\u5165\u4efb\u610f\u503c\u89e6\u53d1\u5347\u7ea7 |
| OCT onuBatchUpgradeStatus | 1.3.6.1.4.1.17409.2.3.1.7.1.4 | OCTET STRING | read-only | Onu\u5217\u8868,\u6bcf2byte\u8868\u793a\u4e00\u4e2aonu\u7684\u5347\u7ea7\u72b6\u6001,\u957f\u5ea6\u4e3a2 * (onu\u4e2a\u6570),\u540c\u5f53\u524d\u5347\u7ea7\u4efb\u52a1\u7684onulist\u4e00\u4e00\u5bf9\u5e94 \u72b6\u6001\u7801\u8bf4\u660e\uff1a 1\uff1aIdle 2\uff1aWaiting 3\uff1aInProgress 4\uff1aSuccess 5\uff1aFailure(\u4e0d\u786e\u5b9a\u539f\u56e0\u7684\u9519\u8bef) 6\uff1aOnuTypeNotConsistent(Onu\u7c7b\u578b\u4e0d\u4e00\u81f4) 7\uff1aFileDownloadFail(\u4e0b\u8f7d\u955c\u50cf\u5931\u8d25,\u5305\u62ecOLT\u5185\u90e8\u677f\u5361\u95f4\u4f20\u8f93\u5931\u8d25\u6216\u8005\u6587\u4ef6\u524d\u7f6e\u6821\u9a8c\u5931\u8d25) 8\uff1aOnuNotExist(Onu\u6389\u7ebf\u6216\u8005\u522b\u7684\u5bfc\u81f4Onuid\u5931\u6548\u7684\u60c5\u51b5) 9\uff1aNotConsistent(Onu\u540c\u5347\u7ea7\u6587\u4ef6\u4e0d\u5339\u914d) 10\uff1aOnuCommunicationFail(Onu\u901a\u4fe1\u5931\u8d25) |
| STR onuBatchUpgradeImageName | 1.3.6.1.4.1.17409.2.3.1.7.1.5 | DisplayString | read-write | \u5199\u5165\u7528\u4e8e\u5347\u7ea7\u7684ONU\u955c\u50cf\u6587\u4ef6\u540d |
| sniObjects | 1.3.6.1.4.1.17409.2.3.2 | |||
| sniAttributeTable | 1.3.6.1.4.1.17409.2.3.2.1 | not-accessible | A list of sniAttributeTable entries. | |
| sniAttributeEntry | 1.3.6.1.4.1.17409.2.3.2.1.1 | not-accessible | The sniAttributeEntry Information | |
| INT sniAttributeDeviceIndex | 1.3.6.1.4.1.17409.2.3.2.1.1.1 | INTEGER | not-accessible | Device Index |
| EPO sniAttributeCardIndex | 1.3.6.1.4.1.17409.2.3.2.1.1.2 | EponCardIndex | not-accessible | Card Index |
| EPO sniAttributePortIndex | 1.3.6.1.4.1.17409.2.3.2.1.1.3 | EponPortIndex | not-accessible | Port Index |
| STR sniPortName | 1.3.6.1.4.1.17409.2.3.2.1.1.4 | DisplayString | read-write | Port Name |
| INT sniAdminStatus | 1.3.6.1.4.1.17409.2.3.2.1.1.5 | INTEGER | read-write | Admin Status |
| INT sniOperationStatus | 1.3.6.1.4.1.17409.2.3.2.1.1.6 | INTEGER | read-only | Operation Status |
| INT sniMediaType | 1.3.6.1.4.1.17409.2.3.2.1.1.7 | INTEGER | read-only | Media Type |
| INT sniAutoNegotiationStatus | 1.3.6.1.4.1.17409.2.3.2.1.1.8 | INTEGER | read-only | Auto Negotiation Status |
| INT sniAutoNegotiationMode | 1.3.6.1.4.1.17409.2.3.2.1.1.9 | INTEGER | read-write | Auto Negotiation Mode |
| T/F sniPerfStats15minuteEnable | 1.3.6.1.4.1.17409.2.3.2.1.1.10 | TruthValue | read-write | true(1) false(2) |
| T/F sniPerfStats24hourEnable | 1.3.6.1.4.1.17409.2.3.2.1.1.11 | TruthValue | read-write | true(1) false(2) |
| TIK sniLastStatusChangeTime | 1.3.6.1.4.1.17409.2.3.2.1.1.12 | TimeTicks | read-only | Last Change Time |
| INT sniMacAddrLearnMaxNum | 1.3.6.1.4.1.17409.2.3.2.1.1.13 | INTEGER | read-write | Number of MAC address limited on the SNI port. value 0 means no limit |
| T/F sniIsolationEnable | 1.3.6.1.4.1.17409.2.3.2.1.1.14 | TruthValue | read-write | Whether or not isolate the SNI port to other ports |
| INT sniPortType | 1.3.6.1.4.1.17409.2.3.2.1.1.15 | INTEGER | read-only | SNI port type, Ge-Port, Te-Port |
| sniTrunkManagement | 1.3.6.1.4.1.17409.2.3.2.2 | |||
| sniTrunkGroupConfigTable | 1.3.6.1.4.1.17409.2.3.2.2.1 | not-accessible | A list of sniTrunkGroupConfigTable entries. | |
| sniTrunkGroupConfigEntry | 1.3.6.1.4.1.17409.2.3.2.2.1.1 | not-accessible | The sniTrunk Group Config Entry Information | |
| INT sniTrunkGroupConfigIndex | 1.3.6.1.4.1.17409.2.3.2.2.1.1.1 | INTEGER | not-accessible | Trunk Group Config Index |
| STR sniTrunkGroupConfigName | 1.3.6.1.4.1.17409.2.3.2.2.1.1.2 | DisplayString | read-create | Trunk Group Config Name |
| OCT sniTrunkGroupConfigMember | 1.3.6.1.4.1.17409.2.3.2.2.1.1.3 | OCTET STRING | read-create | Trunk Group Config Member. It is presented by member port list. Each member port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of member ports in the trunk group. The relationship is: Length of the string = 4 * (NUM of member ports) For example, if device 1, port 1/2 and 2/3 is the member ports of the trunk, then sniTrunkGroupConfigMember is presented as: 01 01 02 00 01 02 03 00 |
| INT sniTrunkGroupConfigPolicy | 1.3.6.1.4.1.17409.2.3.2.2.1.1.4 | INTEGER | read-create | Trunk Group Config Policy |
| ROW sniTrunkGroupConfigRowstatus | 1.3.6.1.4.1.17409.2.3.2.2.1.1.5 | RowStatus | read-create | Trunk Group Config Rowstatus |
| sniTrunkGroupTable | 1.3.6.1.4.1.17409.2.3.2.2.2 | not-accessible | a list of sniTrunkGroupConfigTable entries. | |
| sniTrunkGroupEntry | 1.3.6.1.4.1.17409.2.3.2.2.2.1 | not-accessible | Trunk Group Entry | |
| INT sniTrunkGroupIndex | 1.3.6.1.4.1.17409.2.3.2.2.2.1.1 | INTEGER | not-accessible | Trunk Group Index |
| INT sniTrunkGroupOperationStatus | 1.3.6.1.4.1.17409.2.3.2.2.2.1.2 | INTEGER | read-only | Trunk Group Operation Status |
| INT sniTrunkGroupActualSpeed | 1.3.6.1.4.1.17409.2.3.2.2.2.1.3 | INTEGER | read-only | Trunk Group Actual Speed. The speed is the aggregated rates of all operational UP member ports of the trunk. For example, 4 member ports of the trunk, two are UP, each is 1000M then the SUN is 2000M. As a result, the return of the MIB shall be 2000Mbps |
| INT sniTrunkGroupAdminStatus | 1.3.6.1.4.1.17409.2.3.2.2.2.1.4 | INTEGER | read-write | Trunk Group AdminStatus |
| sniMirrorTable | 1.3.6.1.4.1.17409.2.3.2.3 | not-accessible | a list of sniMirrorTable entries. | |
| sniMirrorEntry | 1.3.6.1.4.1.17409.2.3.2.3.1 | not-accessible | The Mirror Information. | |
| INT sniMirrorGroupIndex | 1.3.6.1.4.1.17409.2.3.2.3.1.1 | INTEGER | not-accessible | Mirror Group Index |
| STR sniMirrorGroupName | 1.3.6.1.4.1.17409.2.3.2.3.1.2 | DisplayString | read-create | Mirror Group Name |
| OCT sniMirrorGroupDstPortList | 1.3.6.1.4.1.17409.2.3.2.3.1.3 | OCTET STRING | read-create | Mirror Group Dst Port List. It is presented by destination port list. Each port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of destination ports in this mirror instance. The relationship is: Length of the string = 4 * (NUM of ports) For example, if device 1, port 2/3 is the destination port of the mirror instance, then object will be presented as: 01 02 03 00 |
| OCT sniMirrorGroupSrcInPortList | 1.3.6.1.4.1.17409.2.3.2.3.1.4 | OCTET STRING | read-create | Mirror Group Src In Port List. It will includes the PON ports. It is presented by source ingress port list. Each port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of source ingress ports in this mirror instance. The relationship is: Length of the string = 4 * (NUM of ports) For example, if device 1, port 2/3, device 6, port 7/8 is the source ingress port of the mirror instance, then object will be presented as: 01 02 03 00 06 07 08 00 |
| OCT sniMirrorGroupSrcOutPortList | 1.3.6.1.4.1.17409.2.3.2.3.1.5 | OCTET STRING | read-create | Mirror Group Src Out Port List. It will includes the PON ports. It is presented by source egress port list. Each port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of source egress ports in this mirror instance. The relationship is: Length of the string = 4 * (NUM of ports) For example, if device 1, port 2/3, device 6, port 7/8 is the source egress port of the mirror instance, then object will be presented as: 01 02 03 00 06 07 08 00 |
| ROW sniMirrorGroupRowstatus | 1.3.6.1.4.1.17409.2.3.2.3.1.6 | RowStatus | read-create | Mirror Group Rowstatus |
| sniMacAddressManagement | 1.3.6.1.4.1.17409.2.3.2.4 | |||
| sniMacAddressManagementTable | 1.3.6.1.4.1.17409.2.3.2.4.1 | not-accessible | A list of MacAddressManagement entries. | |
| sniMacAddressManagementEntry | 1.3.6.1.4.1.17409.2.3.2.4.1.1 | not-accessible | The Mac Address Management Information | |
| INT sniMacAddressManagementDeviceIndex | 1.3.6.1.4.1.17409.2.3.2.4.1.1.1 | INTEGER | not-accessible | device Index |
| INT sniMacAddrTableAgingTime | 1.3.6.1.4.1.17409.2.3.2.4.1.1.2 | INTEGER | read-write | Mac Address Table Aging Time |
| INT sniMacAddrTableClear | 1.3.6.1.4.1.17409.2.3.2.4.1.1.3 | INTEGER | read-write | Mac Address Table Clear |
| sniMacAddressTable | 1.3.6.1.4.1.17409.2.3.2.4.2 | not-accessible | A list of MacAddress entries. | |
| sniMacAddressEntry | 1.3.6.1.4.1.17409.2.3.2.4.2.1 | not-accessible | The Mac Address Information | |
| MAC sniMacAddrIndex | 1.3.6.1.4.1.17409.2.3.2.4.2.1.1 | MacAddress | not-accessible | Mac Address Index |
| INT sniMacAddrVlanIdIndex | 1.3.6.1.4.1.17409.2.3.2.4.2.1.2 | INTEGER | not-accessible | Mac Address Vlan Id Index |
| INT sniMacAddrType | 1.3.6.1.4.1.17409.2.3.2.4.2.1.3 | INTEGER | read-create | Mac Address Type |
| EPO sniMacAddrPortId | 1.3.6.1.4.1.17409.2.3.2.4.2.1.4 | EponDeviceIndex | read-create | Mac Address Port Id |
| ROW sniMacAddrRowStatus | 1.3.6.1.4.1.17409.2.3.2.4.2.1.5 | RowStatus | read-create | delete,create,Update |
| sniBroadcastStormSuppressionTable | 1.3.6.1.4.1.17409.2.3.2.5 | not-accessible | A list of BroadcastStormSuppression entries. | |
| sniBroadcastStormSuppressionEntry | 1.3.6.1.4.1.17409.2.3.2.5.1 | not-accessible | The Broadcast Storm Suppression Information | |
| INT sniBroadcastStormSuppressionDeviceIndex | 1.3.6.1.4.1.17409.2.3.2.5.1.1 | INTEGER | not-accessible | device Index |
| EPO sniBroadcastStormSuppressionCardIndex | 1.3.6.1.4.1.17409.2.3.2.5.1.2 | EponCardIndex | not-accessible | card Index |
| EPO sniBroadcastStormSuppressionPortIndex | 1.3.6.1.4.1.17409.2.3.2.5.1.3 | EponPortIndex | not-accessible | port Index |
| T/F sniUnicastStormEnable | 1.3.6.1.4.1.17409.2.3.2.5.1.4 | TruthValue | read-write | Cast Storm Enable |
| INT sniUnicastStormInPacketRate | 1.3.6.1.4.1.17409.2.3.2.5.1.5 | INTEGER | read-write | Cast Storm In Packet Rate |
| INT sniUnicastStormOutPacketRate | 1.3.6.1.4.1.17409.2.3.2.5.1.6 | INTEGER | read-write | Cast Storm Out Packet Rate |
| T/F sniMulticastStormEnable | 1.3.6.1.4.1.17409.2.3.2.5.1.7 | TruthValue | read-write | true(1) false(2) |
| INT sniMulticastStormInPacketRate | 1.3.6.1.4.1.17409.2.3.2.5.1.8 | INTEGER | read-write | Multicast Storm In Packet Rate |
| INT sniMulticastStormOutPacketRate | 1.3.6.1.4.1.17409.2.3.2.5.1.9 | INTEGER | read-write | Multicast Storm Out Packet Rate |
| T/F sniBroadcastStormEnable | 1.3.6.1.4.1.17409.2.3.2.5.1.10 | TruthValue | read-write | true(1) false(2) |
| INT sniBroadcastStormInPacketRate | 1.3.6.1.4.1.17409.2.3.2.5.1.11 | INTEGER | read-write | Broadcast Storm In Packet Rate |
| INT sniBroadcastStormOutPacketRate | 1.3.6.1.4.1.17409.2.3.2.5.1.12 | INTEGER | read-write | Broadcast Storm Out Packet Rate |
| ponPortObjects | 1.3.6.1.4.1.17409.2.3.3 | |||
| ponPortInfoTable | 1.3.6.1.4.1.17409.2.3.3.1 | not-accessible | PON | |
| ponPortInfoEntry | 1.3.6.1.4.1.17409.2.3.3.1.1 | not-accessible | ||
| INT ponDeviceIndex | 1.3.6.1.4.1.17409.2.3.3.1.1.1 | INTEGER | not-accessible | OLT OLTOLTOLTOLT |
| EPO ponCardIndex | 1.3.6.1.4.1.17409.2.3.3.1.1.2 | EponCardIndex | not-accessible | |
| EPO ponPortIndex | 1.3.6.1.4.1.17409.2.3.3.1.1.3 | EponPortIndex | not-accessible | pon |
| INT ponPortType | 1.3.6.1.4.1.17409.2.3.3.1.1.4 | INTEGER | read-only | PON |
| INT ponOperationStatus | 1.3.6.1.4.1.17409.2.3.3.1.1.5 | INTEGER | read-only | up(1) - down(2) - testing(3) - |
| INT ponPortAdminStatus | 1.3.6.1.4.1.17409.2.3.3.1.1.6 | INTEGER | read-write | enable (1) - disable (2) - |
| INT ponPortMaxOnuNumSupport | 1.3.6.1.4.1.17409.2.3.3.1.1.7 | INTEGER | read-only | ONU |
| INT ponPortUpOnuNum | 1.3.6.1.4.1.17409.2.3.3.1.1.8 | INTEGER | read-only | ONU |
| INT ponPortEncryptMode | 1.3.6.1.4.1.17409.2.3.3.1.1.9 | INTEGER | read-write | |
| INT ponPortEncryptKeyExchangeTime | 1.3.6.1.4.1.17409.2.3.3.1.1.10 | INTEGER | read-write | |
| T/F ponPortIsolationEnable | 1.3.6.1.4.1.17409.2.3.3.1.1.11 | TruthValue | read-write | PON |
| INT maxDsBandwidth | 1.3.6.1.4.1.17409.2.3.3.1.1.12 | INTEGER | read-only | |
| INT actualDsBandwidthInUse | 1.3.6.1.4.1.17409.2.3.3.1.1.13 | INTEGER | read-only | |
| INT remainDsBandwidth | 1.3.6.1.4.1.17409.2.3.3.1.1.14 | INTEGER | read-only | |
| T/F perfStats15minuteEnable | 1.3.6.1.4.1.17409.2.3.3.1.1.15 | TruthValue | read-write | 15 |
| T/F perfStats24hourEnable | 1.3.6.1.4.1.17409.2.3.3.1.1.16 | TruthValue | read-write | 24 |
| INT ponPortMacAddrLearnMaxNum | 1.3.6.1.4.1.17409.2.3.3.1.1.17 | INTEGER | read-write | PONmac value 0 means no limit |
| INT maxUsBandwidth | 1.3.6.1.4.1.17409.2.3.3.1.1.18 | INTEGER | read-only | |
| INT actualUsBandwidthInUse | 1.3.6.1.4.1.17409.2.3.3.1.1.19 | INTEGER | read-only | |
| INT remainUsBandwidth | 1.3.6.1.4.1.17409.2.3.3.1.1.20 | INTEGER | read-only | |
| STR ponPortName | 1.3.6.1.4.1.17409.2.3.3.1.1.21 | DisplayString | read-write | PON port name. |
| INT onuLongEmitDetectEnable | 1.3.6.1.4.1.17409.2.3.3.1.1.22 | INTEGER | read-write | PONONU 01 |
| aclManagementGroup | 1.3.6.1.4.1.17409.2.3.3.2 | ACL | ||
| aclListTable | 1.3.6.1.4.1.17409.2.3.3.2.1 | not-accessible | ACL | |
| aclListEntry | 1.3.6.1.4.1.17409.2.3.3.2.1.1 | not-accessible | ||
| INT aclListIndex | 1.3.6.1.4.1.17409.2.3.3.2.1.1.1 | INTEGER | not-accessible | ACL |
| STR aclDescription | 1.3.6.1.4.1.17409.2.3.3.2.1.1.2 | DisplayString | read-create | ACL |
| ROW ruleRowStatus | 1.3.6.1.4.1.17409.2.3.3.2.1.1.3 | RowStatus | read-create | |
| aclRuleTable | 1.3.6.1.4.1.17409.2.3.3.2.2 | not-accessible | ACL | |
| aclRuleEntry | 1.3.6.1.4.1.17409.2.3.3.2.2.1 | not-accessible | ||
| INT aclRuleListIndex | 1.3.6.1.4.1.17409.2.3.3.2.2.1.1 | INTEGER | not-accessible | |
| INT aclRuleIndex | 1.3.6.1.4.1.17409.2.3.3.2.2.1.2 | INTEGER | not-accessible | ACL |
| MAC matchedSourseMac | 1.3.6.1.4.1.17409.2.3.3.2.2.1.3 | MacAddress | read-create | |
| MAC matchedDestinationMac | 1.3.6.1.4.1.17409.2.3.3.2.2.1.4 | MacAddress | read-create | |
| INT matchedVlanId | 1.3.6.1.4.1.17409.2.3.3.2.2.1.5 | INTEGER | read-create | \u95c1\u544a\u7255\u7f0d\u5a47\u5d22\u9288\u590b\u510d\u95b8\u64b3\u3008an id |
| INT matchedEthernetType | 1.3.6.1.4.1.17409.2.3.3.2.2.1.6 | INTEGER | read-create | |
| IP matchedSourseIP | 1.3.6.1.4.1.17409.2.3.3.2.2.1.7 | IpAddress | read-create | \u95c1\u544a\u7255\u7f0d\u5a47\u5d22\u9288\u590b\u510d\u95b8\u66e8\u525b\u9416\u76dcP |
| IP matchedDestinationIP | 1.3.6.1.4.1.17409.2.3.3.2.2.1.8 | IpAddress | read-create | \u95c1\u544a\u7255\u7f0d\u5a47\u5d22\u9288\u590b\u510d\u95b8\u66e8\u53bd\u7ed0\u6945\u67e3\u928a\u30e5\u6bacP |
| INT matchedIpMessageType | 1.3.6.1.4.1.17409.2.3.3.2.2.1.9 | INTEGER | read-create | |
| INT matchedDscp | 1.3.6.1.4.1.17409.2.3.3.2.2.1.10 | INTEGER | read-create | |
| INT matchedSoursePort | 1.3.6.1.4.1.17409.2.3.3.2.2.1.11 | INTEGER | read-create | |
| INT matchedDestinationPort | 1.3.6.1.4.1.17409.2.3.3.2.2.1.12 | INTEGER | read-create | |
| ROW aclRuleRowStatus | 1.3.6.1.4.1.17409.2.3.3.2.2.1.13 | RowStatus | read-create | |
| OCT matchedFieldSelection | 1.3.6.1.4.1.17409.2.3.3.2.2.1.14 | OCTET STRING | read-create | |
| INT aclAction | 1.3.6.1.4.1.17409.2.3.3.2.2.1.15 | INTEGER | read-create | |
| OCT aclActionParameter | 1.3.6.1.4.1.17409.2.3.3.2.2.1.16 | OCTET STRING | read-create | |
| MAC matchedSourseMacMask | 1.3.6.1.4.1.17409.2.3.3.2.2.1.17 | MacAddress | read-create | \u95c1\u544a\u7255\u7f0d\u5a47\u5d22\u9288\u590b\u510d\u95b8\u66e8\u525b\u9416\u76e1AC\u95c1\u7845\u3000\u93c5\u6fcb\u60a5\u951f\ufffd |
| MAC matchedDestinationMacMask | 1.3.6.1.4.1.17409.2.3.3.2.2.1.18 | MacAddress | read-create | \u95c1\u544a\u7255\u7f0d\u5a47\u5d22\u9288\u590b\u510d\u95b8\u66e8\u53bd\u7ed0\u6945\u67e3\u928a\u30e5\u6bb0AC\u95c1\u7845\u3000\u93c5\u6fcb\u60a5\u951f\ufffd |
| IP matchedSourseIPMask | 1.3.6.1.4.1.17409.2.3.3.2.2.1.19 | IpAddress | read-create | \u95c1\u544a\u7255\u7f0d\u5a47\u5d22\u9288\u590b\u510d\u95b8\u66e8\u525b\u9416\u76dcP\u95c1\u7845\u3000\u93c5\u6fcb\u60a5\u951f\ufffd |
| IP matchedDestinationIPMask | 1.3.6.1.4.1.17409.2.3.3.2.2.1.20 | IpAddress | read-create | \u95c1\u544a\u7255\u7f0d\u5a47\u5d22\u9288\u590b\u510d\u95b8\u66e8\u53bd\u7ed0\u6945\u67e3\u928a\u30e5\u6bacP\u95c1\u7845\u3000\u93c5\u6fcb\u60a5\u951f\ufffd |
| portACLListTable | 1.3.6.1.4.1.17409.2.3.3.2.3 | not-accessible | ACL This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of aclDeviceIndex shall be set to 0, /OLT SNI aclCardIndex, and aclPortIndex set to 0 indicates meaningless OLT onu ID - Set aclDeviceIndex to corresponding ONU ID, aclCardIndex, and aclPortIndex set to 0 indicates meaningless ONU UNI - Set aclDeviceIndex to corresponding ONU ID, aclCardIndex, and aclPortIndex set to the corresponding value 2. If the table is maintained in ONU device: aclDeviceIndex shall be set to 0 to indicate meaningless. aclCardIndex shall be set to corresponding slot. aclPortIndex shall be set to corresponding port. | |
| portACLListEntry | 1.3.6.1.4.1.17409.2.3.3.2.3.1 | not-accessible | ||
| EPO aclDeviceIndex | 1.3.6.1.4.1.17409.2.3.3.2.3.1.1 | EponDeviceIndex | not-accessible | For OLT, set to corresponding PON port, SNI, or ONU For ONU, set to 0 |
| EPO aclCardIndex | 1.3.6.1.4.1.17409.2.3.3.2.3.1.2 | EponCardIndex | not-accessible | For OLT, set to 0, For ONU, set to corresponding slot |
| EPO aclPortIndex | 1.3.6.1.4.1.17409.2.3.3.2.3.1.3 | EponPortIndex | not-accessible | For OLT, set to 0, For ONU, set to corresponding slot |
| INT portAclListIndex | 1.3.6.1.4.1.17409.2.3.3.2.3.1.4 | INTEGER | not-accessible | ACL |
| BIT aclPortDirection | 1.3.6.1.4.1.17409.2.3.3.2.3.1.5 | Bits | read-create | ACL |
| ROW aclRowStatus | 1.3.6.1.4.1.17409.2.3.3.2.3.1.6 | RowStatus | read-create | ACL |
| ponBroadcastStormSuppressionTable | 1.3.6.1.4.1.17409.2.3.3.3 | not-accessible | ||
| ponBroadcastStormSuppressionEntry | 1.3.6.1.4.1.17409.2.3.3.3.1 | not-accessible | ||
| INT bsDeviceIndex | 1.3.6.1.4.1.17409.2.3.3.3.1.1 | INTEGER | not-accessible | OLT OLTOLTOLTOLT |
| EPO bsCardIndex | 1.3.6.1.4.1.17409.2.3.3.3.1.2 | EponCardIndex | not-accessible | |
| EPO bsPortIndex | 1.3.6.1.4.1.17409.2.3.3.3.1.3 | EponPortIndex | not-accessible | pon |
| T/F unicastStormEnable | 1.3.6.1.4.1.17409.2.3.3.3.1.4 | TruthValue | read-write | |
| INT unicastStormInPacketRate | 1.3.6.1.4.1.17409.2.3.3.3.1.5 | INTEGER | read-write | |
| INT unicastStormOutPacketRate | 1.3.6.1.4.1.17409.2.3.3.3.1.6 | INTEGER | read-write | |
| T/F multicastStormEnable | 1.3.6.1.4.1.17409.2.3.3.3.1.7 | TruthValue | read-write | |
| INT multicastStormInPacketRate | 1.3.6.1.4.1.17409.2.3.3.3.1.8 | INTEGER | read-write | |
| INT multicastStormOutPacketRate | 1.3.6.1.4.1.17409.2.3.3.3.1.9 | INTEGER | read-write | |
| T/F broadcastStormEnable | 1.3.6.1.4.1.17409.2.3.3.3.1.10 | TruthValue | read-write | |
| INT broadcastStormInPacketRate | 1.3.6.1.4.1.17409.2.3.3.3.1.11 | INTEGER | read-write | |
| INT broadcastStormOutPacketRate | 1.3.6.1.4.1.17409.2.3.3.3.1.12 | INTEGER | read-write | |
| ponOnuAuthenticationModeTable | 1.3.6.1.4.1.17409.2.3.3.4 | not-accessible | PONONU | |
| ponOnuAuthenticationModeEntry | 1.3.6.1.4.1.17409.2.3.3.4.1 | not-accessible | The ponOnuAuthenticationModeEntry Information | |
| INT ponAuthenDeviceIndex | 1.3.6.1.4.1.17409.2.3.3.4.1.1 | INTEGER | not-accessible | OLTOLTOLT OLTOLT |
| EPO ponAuthenCardIndex | 1.3.6.1.4.1.17409.2.3.3.4.1.2 | EponCardIndex | not-accessible | |
| EPO ponAuthenPortIndex | 1.3.6.1.4.1.17409.2.3.3.4.1.3 | EponPortIndex | not-accessible | pon |
| INT ponOnuAuthenMode | 1.3.6.1.4.1.17409.2.3.3.4.1.4 | INTEGER | read-create | Authen mode: This is mode in authen , |
| INT onuAuthenModeRowStatus | 1.3.6.1.4.1.17409.2.3.3.4.1.5 | INTEGER | read-create | onuauthen Row Status |
| ponPortOpticalTransmissionPropertyTable | 1.3.6.1.4.1.17409.2.3.3.5 | not-accessible | ||
| ponPortOpticalTransmissionPropertyEntry | 1.3.6.1.4.1.17409.2.3.3.5.1 | not-accessible | ||
| INT ponOpDeviceIndex | 1.3.6.1.4.1.17409.2.3.3.5.1.1 | INTEGER | read-only | OLT OLTOLTOLTOLT |
| EPO ponOpCardIndex | 1.3.6.1.4.1.17409.2.3.3.5.1.2 | EponCardIndex | read-only | |
| EPO ponOpPortIndex | 1.3.6.1.4.1.17409.2.3.3.5.1.3 | EponPortIndex | read-only | |
| INT ponOpVcc | 1.3.6.1.4.1.17409.2.3.3.5.1.4 | INTEGER | read-only | |
| INT ponOpBias | 1.3.6.1.4.1.17409.2.3.3.5.1.5 | INTEGER | read-only | |
| INT ponOpTxPower | 1.3.6.1.4.1.17409.2.3.3.5.1.6 | INTEGER | read-only | |
| INT ponOpRxPower | 1.3.6.1.4.1.17409.2.3.3.5.1.7 | INTEGER | read-only | |
| ponPortOpticalRxPowerTable | 1.3.6.1.4.1.17409.2.3.3.6 | not-accessible | ||
| ponPortOpticalRxPowerEntry | 1.3.6.1.4.1.17409.2.3.3.6.1 | not-accessible | The ponPortOpticalRxPowerEntry Information | |
| EPO ponOpRxOfOnuDeviceIndex | 1.3.6.1.4.1.17409.2.3.3.6.1.1 | EponDeviceIndex | not-accessible | onuDevice Index |
| INT ponOpRxPowerOfOnu | 1.3.6.1.4.1.17409.2.3.3.6.1.2 | INTEGER | read-only | OLT pon port received onu optical power |
| onuObjects | 1.3.6.1.4.1.17409.2.3.4 | |||
| onuInfoTable | 1.3.6.1.4.1.17409.2.3.4.1 | not-accessible | A list of onuInfoTable entries. | |
| onuInfoEntry | 1.3.6.1.4.1.17409.2.3.4.1.1 | not-accessible | The onuInfoEntry Information | |
| EPO onuDeviceIndex | 1.3.6.1.4.1.17409.2.3.4.1.1.1 | EponDeviceIndex | not-accessible | onuDevice Index |
| STR onuName | 1.3.6.1.4.1.17409.2.3.4.1.1.2 | DisplayString | read-write | onu Name |
| INT onuType | 1.3.6.1.4.1.17409.2.3.4.1.1.3 | INTEGER | read-only | onu Type fixed(1) - not slot concept chassisBased(2) - port is indexed by coupling slot ID |
| IP onuIpAddress | 1.3.6.1.4.1.17409.2.3.4.1.1.4 | IpAddress | read-write | onu Ip Address |
| IP onuIpSubnetMask | 1.3.6.1.4.1.17409.2.3.4.1.1.5 | IpAddress | read-write | onu Ip Subnet Mask |
| IP onuIpGateway | 1.3.6.1.4.1.17409.2.3.4.1.1.6 | IpAddress | read-write | onu Ip Gateway |
| MAC onuMacAddress | 1.3.6.1.4.1.17409.2.3.4.1.1.7 | MacAddress | read-only | onuMac Address |
| INT onuOperationStatus | 1.3.6.1.4.1.17409.2.3.4.1.1.8 | INTEGER | read-only | onu Operation Status |
| INT onuAdminStatus | 1.3.6.1.4.1.17409.2.3.4.1.1.9 | INTEGER | read-write | onu Admin Status |
| STR onuChipVendor | 1.3.6.1.4.1.17409.2.3.4.1.1.10 | DisplayString | read-only | onu Chip Vendor |
| STR onuChipType | 1.3.6.1.4.1.17409.2.3.4.1.1.11 | DisplayString | read-only | onu Chip Type |
| STR onuChipVersion | 1.3.6.1.4.1.17409.2.3.4.1.1.12 | DisplayString | read-only | onu Chip Version |
| STR onuSoftwareVersion | 1.3.6.1.4.1.17409.2.3.4.1.1.13 | DisplayString | read-only | onu Software Version |
| STR onuFirmwareVersion | 1.3.6.1.4.1.17409.2.3.4.1.1.14 | DisplayString | read-only | onu Firmware Version |
| INT onuTestDistance | 1.3.6.1.4.1.17409.2.3.4.1.1.15 | INTEGER | read-only | onu Test Distance |
| INT onuLlidId | 1.3.6.1.4.1.17409.2.3.4.1.1.16 | INTEGER | read-only | onu Llid Id |
| INT resetONU | 1.3.6.1.4.1.17409.2.3.4.1.1.17 | INTEGER | read-write | reset ONU |
| C32 onuTimeSinceLastRegister | 1.3.6.1.4.1.17409.2.3.4.1.1.18 | Counter32 | read-only | The number of seconds, since the time when the ONU is registered |
| INT onuMgmtCvlan | 1.3.6.1.4.1.17409.2.3.4.1.1.19 | INTEGER | read-write | CVLAN ID of management data for the ONU |
| INT onuMgmtSvlan | 1.3.6.1.4.1.17409.2.3.4.1.1.20 | INTEGER | read-write | SVLAN ID of management data for the ONU Set to 0, means only single VLAN is supported, no SVLAN concept, for the ONU management |
| INT onuMgmtPriority | 1.3.6.1.4.1.17409.2.3.4.1.1.21 | INTEGER | read-write | Tagged dot1p priority of management data for the ONU |
| IP onuMgmtSnmpTrapHost | 1.3.6.1.4.1.17409.2.3.4.1.1.22 | IpAddress | read-write | The host IP address, to which the ONU will send trap. |
| STR onuMgmtSnmpCommunityForRead | 1.3.6.1.4.1.17409.2.3.4.1.1.23 | DisplayString | read-write | The read SNMP community to the ONU. |
| STR onuMgmtSnmpCommunityForWrite | 1.3.6.1.4.1.17409.2.3.4.1.1.24 | DisplayString | read-write | The write SNMP community to the ONU. |
| STR onuVendorId | 1.3.6.1.4.1.17409.2.3.4.1.1.25 | DisplayString | read-only | ONU vendor id. |
| STR onuModelId | 1.3.6.1.4.1.17409.2.3.4.1.1.26 | DisplayString | read-only | ONU model id. |
| STR onuHardwareVersion | 1.3.6.1.4.1.17409.2.3.4.1.1.27 | DisplayString | read-only | ONU hardware version. |
| STR onuSn | 1.3.6.1.4.1.17409.2.3.4.1.1.28 | DisplayString | read-only | ONU serial number. |
| TIK onuTimeLastRegister | 1.3.6.1.4.1.17409.2.3.4.1.1.29 | TimeTicks | read-only | |
| onuPonPortOpticalTransmissionPropertyTable | 1.3.6.1.4.1.17409.2.3.4.2 | not-accessible | This table is designed for both OLT and ONU Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT - OnuNum of EponDeviceIndex TC shall be set to 0, onuPonPortOpticalTransmissionPropertyCardIndex, and onuPonPortOpticalTransmissionPropertyPortIndex set to 65535 indicates meaningless ONU - Set EponDeviceIndex TC to corresponding ONU ID, onuPonPortOpticalTransmissionPropertyCardIndex, and onuPonPortOpticalTransmissionPropertyPortIndex set to the corresponding value | |
| onuPonPortOpticalTransmissionPropertyEntry | 1.3.6.1.4.1.17409.2.3.4.2.1 | not-accessible | The onuPonPortOpticalTransmissionPropertyEntry Information | |
| EPO onuPonPortOpticalTransmissionPropertyDeviceIndex | 1.3.6.1.4.1.17409.2.3.4.2.1.1 | EponDeviceIndex | not-accessible | Device Index of the ONU. |
| INT onuPonPortOpticalTransmissionPropertyCardIndex | 1.3.6.1.4.1.17409.2.3.4.2.1.2 | INTEGER | not-accessible | Card Index in the ONU. Shall set to 0, if ONU is not a modulized device |
| INT onuPonPortOpticalTransmissionPropertyPortIndex | 1.3.6.1.4.1.17409.2.3.4.2.1.3 | INTEGER | not-accessible | Port Index in the Pon card of ONU |
| INT onuReceivedOpticalPower | 1.3.6.1.4.1.17409.2.3.4.2.1.4 | INTEGER | read-only | received Optical Power |
| INT onuTramsmittedOpticalPower | 1.3.6.1.4.1.17409.2.3.4.2.1.5 | INTEGER | read-only | tramsmitted Optical Power |
| INT onuBiasCurrent | 1.3.6.1.4.1.17409.2.3.4.2.1.6 | INTEGER | read-only | biasCurrent |
| INT onuWorkingVoltage | 1.3.6.1.4.1.17409.2.3.4.2.1.7 | INTEGER | read-only | onuworking Voltage |
| INT onuWorkingTemperature | 1.3.6.1.4.1.17409.2.3.4.2.1.8 | INTEGER | read-only | working Temperature |
| onuCapabilityTable | 1.3.6.1.4.1.17409.2.3.4.3 | not-accessible | A list of onuInfoTable entries. | |
| onuCapabilityEntry | 1.3.6.1.4.1.17409.2.3.4.3.1 | not-accessible | The onuCapabilityEntry Information | |
| EPO onuCapabilityDeviceIndex | 1.3.6.1.4.1.17409.2.3.4.3.1.1 | EponDeviceIndex | not-accessible | onu Device Index |
| INT onuGePortNum | 1.3.6.1.4.1.17409.2.3.4.3.1.2 | INTEGER | read-only | gePort Num |
| OCT onuGePortBitmap | 1.3.6.1.4.1.17409.2.3.4.3.1.3 | OCTET STRING | read-only | gePort Bitmap In slot+port pair list manner. Suppose each slot support up to 64 ports. One octet to indentify slot and 8 octets to identify portbitmap for the slot. The bitmap definition is internet sequence. The most left bit is for port 1 of the slot, the most right bit is for port 64 of the slot. If the slot cannot support 64 ports, set the bits of not supported ports to 0. If the port is GE port, set the corresponding bit to 1. Since the slot num depends on each individual device, the object is variable length. If the device is fixed box (not modulized), set the slot number to 255. Then the network management system could ignore the slot info. It is not necessary to list the slot doesn't support GE port. For example, if have 4 GE ports, of: 1/4, 1/6, 2/3, 4/17, the object will be presented in: 01 14 00 00 00 00 00 00 00 02 20 00 00 00 00 00 00 00 04 00 00 80 00 00 00 00 00 Another example, for fixed box, if have 4 ge ports of 4,6,10,17, the object will be presented as: FF 14 40 10 00 00 00 00 |
| INT onuFePortNum | 1.3.6.1.4.1.17409.2.3.4.3.1.4 | INTEGER | read-only | fePort Num |
| OCT onuFePortBitmap | 1.3.6.1.4.1.17409.2.3.4.3.1.5 | OCTET STRING | read-only | fePort Bitmap In slot+port pair list manner. Suppose each slot support up to 64 ports. One octet to indentify slot and 8 octets to identify portbitmap for the slot. The bitmap definition is internet sequence. The most left bit is for port 1 of the slot, the most right bit is for port 64 of the slot. If the slot cannot support 64 ports, set the bits of not supported ports to 0. If the port is FE port, set the corresponding bit to 1. Since the slot num depends on each individual device, the object is variable length. If the device is fixed box (not modulized), set the slot number to 255. Then the network management system could ignore the slot info. It is not necessary to list the slot doesn't support FE port. For example, if have 4 FE ports, of: 1/4, 1/6, 2/3, 4/17, the object will be presented in: 01 14 00 00 00 00 00 00 00 02 20 00 00 00 00 00 00 00 04 00 00 80 00 00 00 00 00 Another example, for fixed box, if have 4 FE ports of 4,6,10,17, the object will be presented as: FF 14 40 10 00 00 00 00 |
| INT onuQueueNumUplink | 1.3.6.1.4.1.17409.2.3.4.3.1.6 | INTEGER | read-only | queue Num Uplink |
| INT onuMaxQueueNumUplink | 1.3.6.1.4.1.17409.2.3.4.3.1.7 | INTEGER | read-only | max Queue Num Uplink |
| INT onuQueueNumDownlink | 1.3.6.1.4.1.17409.2.3.4.3.1.8 | INTEGER | read-only | queue Num Downlink |
| INT onuMaxQueueNumDownlink | 1.3.6.1.4.1.17409.2.3.4.3.1.9 | INTEGER | read-only | max Queue Num Downlink |
| T/F onuFecEnable | 1.3.6.1.4.1.17409.2.3.4.3.1.10 | TruthValue | read-write | fec Enable |
| INT onuEncryptMode | 1.3.6.1.4.1.17409.2.3.4.3.1.11 | INTEGER | read-only | encrypt Mode |
| TIK onuEncryptKeyExchangeTime | 1.3.6.1.4.1.17409.2.3.4.3.1.12 | TimeTicks | read-only | encryptKeyExchange Time |
| T/F onuIsolationEnable | 1.3.6.1.4.1.17409.2.3.4.3.1.13 | TruthValue | read-write | ONU\u7f02\u5099\u7126\u59ab\u5fdb\u5d39\u93b7\u5c7b\u4eb9\u6fde\u6219\u57ba\u9237\u66e2\u67e1\u9350\u3125\u4e9e\u95bb\u5ea2\u5f43\u9709\u95bf\u6fc6\u7246\u9354\u7538\u67db\u8e47\u30e6\u5af9 true(1) false(2) |
| slaTable | 1.3.6.1.4.1.17409.2.3.4.4 | not-accessible | A list of slaTable entries. | |
| slaEntry | 1.3.6.1.4.1.17409.2.3.4.4.1 | not-accessible | The slaEntry Information | |
| EPO slaIndex | 1.3.6.1.4.1.17409.2.3.4.4.1.1 | EponDeviceIndex | not-accessible | sla Index |
| INT slaDsFixedBW | 1.3.6.1.4.1.17409.2.3.4.4.1.2 | INTEGER | read-write | Downstream sla FixedBW |
| INT slaDsPeakBW | 1.3.6.1.4.1.17409.2.3.4.4.1.3 | INTEGER | read-write | Downstream sla PeakBW |
| INT slaDsCommittedBW | 1.3.6.1.4.1.17409.2.3.4.4.1.4 | INTEGER | read-write | Downstream sla CommittedBW |
| INT slaUsFixedBW | 1.3.6.1.4.1.17409.2.3.4.4.1.5 | INTEGER | read-write | Upstream sla FixedBW |
| INT slaUsPeakBW | 1.3.6.1.4.1.17409.2.3.4.4.1.6 | INTEGER | read-write | Upstream sla PeakBW |
| INT slaUsCommittedBW | 1.3.6.1.4.1.17409.2.3.4.4.1.7 | INTEGER | read-write | Upstream sla CommittedBW |
| onuAuthenticationManagement | 1.3.6.1.4.1.17409.2.3.4.5 | |||
| INT onuAuthenticationPolicy | 1.3.6.1.4.1.17409.2.3.4.5.1 | INTEGER | read-write | Define the behavior on the auth policy acceptAll(1) - Disable ONU authentication, all ONU could register to OLT rejectNotConfigured(2) - Only the relationship b/w ONU ID and MAC address defined in onuAuthenticationPreConfigTable could register to OLT. |
| onuAuthenticationPreConfigTable | 1.3.6.1.4.1.17409.2.3.4.5.2 | not-accessible | A list of onuAuthenticationPreConfigTable entries. | |
| onuAuthenticationPreConfigEntry | 1.3.6.1.4.1.17409.2.3.4.5.2.1 | not-accessible | The onuAuthenticationPreConfigEntry Information | |
| EPO onuAuthenOnuId | 1.3.6.1.4.1.17409.2.3.4.5.2.1.1 | EponDeviceIndex | not-accessible | onu logical ID |
| MAC onuAuthenMacAddress | 1.3.6.1.4.1.17409.2.3.4.5.2.1.2 | MacAddress | read-create | onu Mac Address |
| INT onuAuthenAction | 1.3.6.1.4.1.17409.2.3.4.5.2.1.3 | INTEGER | read-create | Authen Action This is optional in function |
| INT onuAuthenRowStatus | 1.3.6.1.4.1.17409.2.3.4.5.2.1.4 | INTEGER | read-create | authen Row Status |
| onuAuthenticationBlockTable | 1.3.6.1.4.1.17409.2.3.4.5.3 | not-accessible | A list of onuAuthenticationBlockTable entries. | |
| onuAuthenticationBlockEntry | 1.3.6.1.4.1.17409.2.3.4.5.3.1 | not-accessible | The onuAuthenticationBlockEntry Information | |
| EPO onuAuthenBlockOnuId | 1.3.6.1.4.1.17409.2.3.4.5.3.1.1 | EponDeviceIndex | not-accessible | ONU Id |
| MAC onuAuthenBlockMacAddress | 1.3.6.1.4.1.17409.2.3.4.5.3.1.2 | MacAddress | read-create | Mac Address |
| TIK authenBlockTime | 1.3.6.1.4.1.17409.2.3.4.5.3.1.3 | TimeTicks | read-create | \u52a0\u5165\u9ed1\u540d\u5355\u65f6\u95f4 |
| ROW onuAuthenBlockRowStatus | 1.3.6.1.4.1.17409.2.3.4.5.3.1.4 | RowStatus | read-create | Row Status |
| onuLoidAuthenticationConfigTable | 1.3.6.1.4.1.17409.2.3.4.5.4 | not-accessible | A list of onu LOID AuthenticationConfigTable entries. | |
| onuLoidAuthenticationConfigEntry | 1.3.6.1.4.1.17409.2.3.4.5.4.1 | not-accessible | The onuLoidAuthenticationConfigEntryInformation | |
| EPO onuLoidAuthenOnuId | 1.3.6.1.4.1.17409.2.3.4.5.4.1.1 | EponDeviceIndex | not-accessible | onu logical ID |
| OCT onuLoidAuthenLOID | 1.3.6.1.4.1.17409.2.3.4.5.4.1.2 | OCTET STRING | read-create | |
| OCT onuLoidAuthenPassword | 1.3.6.1.4.1.17409.2.3.4.5.4.1.3 | OCTET STRING | read-create | |
| ROW onuLoidAuthenRowStatus | 1.3.6.1.4.1.17409.2.3.4.5.4.1.4 | RowStatus | read-create | Row Status |
| onuAutoFindTable | 1.3.6.1.4.1.17409.2.3.4.6 | not-accessible | A list of autofind list entries. | |
| onuAutoFindEntry | 1.3.6.1.4.1.17409.2.3.4.6.1 | not-accessible | The onuAutoFindEntry Information \u81ea\u52a8\u4e0a\u7535\u4e0a\u7ebf\u7684\u672a\u6388\u6743\u7684ONU,\u5168\u90e8\u53ea\u8bfb,\u4e0d\u505a\u914d\u7f6e | |
| EPO onuAutoFindOnuIndex | 1.3.6.1.4.1.17409.2.3.4.6.1.1 | EponDeviceIndex | not-accessible | index |
| MAC onuAutoFindMacAddress | 1.3.6.1.4.1.17409.2.3.4.6.1.2 | MacAddress | read-only | Mac Address |
| TIK onuAutoFindTime | 1.3.6.1.4.1.17409.2.3.4.6.1.3 | TimeTicks | read-only | \u4e0a\u7ebf\u65f6\u95f4 |
| OCT onuAutoFindAuthenLOID | 1.3.6.1.4.1.17409.2.3.4.6.1.4 | OCTET STRING | read-only | ONU\u8ba4\u8bc1\u903b\u8f91\u6807\u8bc6; \u5f53\u4f4d\u6570\u4e3a0\u7684\u65f6\u5019,\u8868\u793a\u6ca1\u6709 |
| OCT onuAutoFindAuthenPassword | 1.3.6.1.4.1.17409.2.3.4.6.1.5 | OCTET STRING | read-only | \u5bc6\u7801\u4e3a0\uff5e12\u4f4d\u7684\u5b57\u7b26\u4e32,\u5982356abc,\u5f53\u4f4d\u6570\u4e3a0\u7684\u65f6\u5019,\u8868\u793a\u6ca1\u6709\u5bc6\u7801 |
| uniObjects | 1.3.6.1.4.1.17409.2.3.5 | |||
| uniAttributeTable | 1.3.6.1.4.1.17409.2.3.5.1 | not-accessible | A list of uniAttributeTable entries. | |
| uniAttributeEntry | 1.3.6.1.4.1.17409.2.3.5.1.1 | not-accessible | The uniAttributeEntry Information | |
| EPO uniAttributeDeviceIndex | 1.3.6.1.4.1.17409.2.3.5.1.1.1 | EponDeviceIndex | not-accessible | Device Index For OLT, set to corresponding ONU ID For ONU, set to 0 |
| EPO uniAttributeCardIndex | 1.3.6.1.4.1.17409.2.3.5.1.1.2 | EponCardIndex | not-accessible | Card Index The value of this cardIndex depends on onuType. fixed(1) - set to 0, to indicate slot num is meaningless. chassisBased(2) - MUST NOT be zero |
| EPO uniAttributePortIndex | 1.3.6.1.4.1.17409.2.3.5.1.1.3 | EponPortIndex | not-accessible | Port Index |
| INT uniAdminStatus | 1.3.6.1.4.1.17409.2.3.5.1.1.4 | INTEGER | read-write | Admin Status |
| INT uniOperationStatus | 1.3.6.1.4.1.17409.2.3.5.1.1.5 | INTEGER | read-only | Operation Status |
| T/F uniAutoNegotiationEnable | 1.3.6.1.4.1.17409.2.3.5.1.1.6 | TruthValue | read-write | Whether or not to enable auto negotiation on the uni port |
| AUT uniAutoNegotiationLocalTechAbility | 1.3.6.1.4.1.17409.2.3.5.1.1.7 | AutoNegotiationTechAbility | read-only | This indicates the technology ability of the local device |
| INT uniAutoNegotiationRestart | 1.3.6.1.4.1.17409.2.3.5.1.1.8 | INTEGER | read-write | Restart the autonegotiation |
| INT uniMacAddrLearnMaxNum | 1.3.6.1.4.1.17409.2.3.5.1.1.9 | INTEGER | read-write | Mac Address Learn Max Num |
| T/F uniCurrentPerfStatsEnable | 1.3.6.1.4.1.17409.2.3.5.1.1.10 | TruthValue | read-write | true(1) false(2) |
| uniMacAddressManagement | 1.3.6.1.4.1.17409.2.3.5.2 | |||
| uniMacAddressManagementTable | 1.3.6.1.4.1.17409.2.3.5.2.1 | not-accessible | A list of MacAddress global parameter in a onu. | |
| uniMacAddressManagementEntry | 1.3.6.1.4.1.17409.2.3.5.2.1.1 | not-accessible | ||
| EPO uniMacAddrONUIndex | 1.3.6.1.4.1.17409.2.3.5.2.1.1.1 | EponDeviceIndex | not-accessible | onuDevice Index |
| INT uniMacAddrAgingTime | 1.3.6.1.4.1.17409.2.3.5.2.1.1.2 | INTEGER | read-write | Mac Address Table Aging Time |
| INT uniMacAddrClear | 1.3.6.1.4.1.17409.2.3.5.2.1.1.3 | INTEGER | read-write | Mac Address Table Clear |
| uniMacAddressTable | 1.3.6.1.4.1.17409.2.3.5.2.2 | not-accessible | A list of MacAddress entries. | |
| uniMacAddressEntry | 1.3.6.1.4.1.17409.2.3.5.2.2.1 | not-accessible | The Mac Address Information | |
| MAC uniMacAddrIndex | 1.3.6.1.4.1.17409.2.3.5.2.2.1.1 | MacAddress | not-accessible | Mac Address Index |
| INT uniMacAddrVlanIdIndex | 1.3.6.1.4.1.17409.2.3.5.2.2.1.2 | INTEGER | not-accessible | Mac Address Vlan Id Index |
| INT uniMacAddrType | 1.3.6.1.4.1.17409.2.3.5.2.2.1.3 | INTEGER | read-create | Mac Address Type |
| OCT uniMacAddrPortId | 1.3.6.1.4.1.17409.2.3.5.2.2.1.4 | OCTET STRING | read-create | Mac Address Port Id The first octet is slot ID, the second octet is port ID. If the device is fixed (not modulized), set slot ID to 0. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. For example, for modulized port 10/3, set to 0x0A 03 For fix box port 3, set to 0x00 03 |
| ROW uniMacAddrRowStatus | 1.3.6.1.4.1.17409.2.3.5.2.2.1.5 | RowStatus | read-create | delete,create. Update is not supported |
| uniTrunkManagement | 1.3.6.1.4.1.17409.2.3.5.3 | |||
| uniTrunkGroupConfigTable | 1.3.6.1.4.1.17409.2.3.5.3.1 | not-accessible | A list of uniTrunkGroupConfigTable entries. | |
| uniTrunkGroupConfigEntry | 1.3.6.1.4.1.17409.2.3.5.3.1.1 | not-accessible | The uniTrunk Group Config Entry Information | |
| INT uniTrunkGroupConfigIndex | 1.3.6.1.4.1.17409.2.3.5.3.1.1.1 | INTEGER | not-accessible | Trunk Group Config Index |
| STR uniTrunkGroupConfigName | 1.3.6.1.4.1.17409.2.3.5.3.1.1.2 | DisplayString | read-create | Trunk Group Config Name |
| OCT uniTrunkGroupConfigMember | 1.3.6.1.4.1.17409.2.3.5.3.1.1.3 | OCTET STRING | read-create | Trunk Group Config Member. It is presented by member port list. Each member port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of member ports in the trunk group. If the ONU is fixed (not modulized), set slot ID to 0, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of member ports) For example, if port 1/2 and 3/4 is the member ports of the trunk, then the object is presented as: 01 02 03 04 |
| INT uniTrunkGroupConfigPolicy | 1.3.6.1.4.1.17409.2.3.5.3.1.1.4 | INTEGER | read-create | Trunk Group Config Policy |
| ROW uniTrunkGroupConfigRowstatus | 1.3.6.1.4.1.17409.2.3.5.3.1.1.5 | RowStatus | read-create | Trunk Group Config Rowstatus |
| uniTrunkGroupTable | 1.3.6.1.4.1.17409.2.3.5.3.2 | not-accessible | a list of uniTrunkGroupConfigTable entries. | |
| uniTrunkGroupEntry | 1.3.6.1.4.1.17409.2.3.5.3.2.1 | not-accessible | Trunk Group Entry | |
| INT uniTrunkGroupIndex | 1.3.6.1.4.1.17409.2.3.5.3.2.1.1 | INTEGER | not-accessible | Trunk Group Index |
| INT uniTrunkGroupOperationStatus | 1.3.6.1.4.1.17409.2.3.5.3.2.1.2 | INTEGER | read-only | Trunk Group Operation Status |
| INT uniTrunkGroupActualSpeed | 1.3.6.1.4.1.17409.2.3.5.3.2.1.3 | INTEGER | read-only | Trunk Group Actual Speed. The speed is the aggregated rates of all operational UP member ports of the trunk. For example, 4 member ports of the trunk, two are UP, each is 1000M then the SUN is 2000M. As a result, the return of the MIB shall be 2000Mbps |
| INT uniTrunkGroupAdminStatus | 1.3.6.1.4.1.17409.2.3.5.3.2.1.4 | INTEGER | read-write | Trunk Group AdminStatus |
| uniPortRateLimitTable | 1.3.6.1.4.1.17409.2.3.5.4 | not-accessible | A list of PortRateLimit entries. | |
| uniPortRateLimitEntry | 1.3.6.1.4.1.17409.2.3.5.4.1 | not-accessible | The Port Rate Limit Information | |
| EPO uniPortRateLimitDeviceIndex | 1.3.6.1.4.1.17409.2.3.5.4.1.1 | EponDeviceIndex | not-accessible | device Index For OLT, set to corresponding ONU ID For ONU, set to 0 |
| EPO uniPortRateLimitCardIndex | 1.3.6.1.4.1.17409.2.3.5.4.1.2 | EponCardIndex | not-accessible | card Index The value of this cardIndex depends on onuType. fixed(1) - set to 0, to indicate slot num is meaningless. chassisBased(2) - MUST NOT be zero |
| EPO uniPortRateLimitPortIndex | 1.3.6.1.4.1.17409.2.3.5.4.1.3 | EponPortIndex | not-accessible | port Index |
| INT uniPortInCIR | 1.3.6.1.4.1.17409.2.3.5.4.1.4 | INTEGER | read-write | Committed Information Rate(CIR) in kbps. |
| INT uniPortInCBS | 1.3.6.1.4.1.17409.2.3.5.4.1.5 | INTEGER | read-write | Committed Burst Rate(CBS) in kbyte. |
| INT uniPortInEBS | 1.3.6.1.4.1.17409.2.3.5.4.1.6 | INTEGER | read-write | ebs in kbytes. |
| INT uniPortOutCIR | 1.3.6.1.4.1.17409.2.3.5.4.1.7 | INTEGER | read-write | Committed Information Rate(CIR) in kbps. |
| INT uniPortOutPIR | 1.3.6.1.4.1.17409.2.3.5.4.1.8 | INTEGER | read-write | PIR in kbps. |
| T/F uniPortInRateLimitEnable | 1.3.6.1.4.1.17409.2.3.5.4.1.9 | TruthValue | read-write | Whether or not to enable or disable ingress rate limit for the UNI. |
| T/F uniPortOutRateLimitEnable | 1.3.6.1.4.1.17409.2.3.5.4.1.10 | TruthValue | read-write | Whether or not to enable or disable egress rate limit for the UNI. |
| uniMirrorTable | 1.3.6.1.4.1.17409.2.3.5.5 | not-accessible | a list of uniMirrorTable entries. | |
| uniMirrorEntry | 1.3.6.1.4.1.17409.2.3.5.5.1 | not-accessible | The Mirror Information. | |
| INT uniMirrorGroupIndex | 1.3.6.1.4.1.17409.2.3.5.5.1.1 | INTEGER | not-accessible | Mirror Group Index |
| STR uniMirrorGroupName | 1.3.6.1.4.1.17409.2.3.5.5.1.2 | DisplayString | read-create | Mirror Group Name |
| OCT uniMirrorGroupDstPortList | 1.3.6.1.4.1.17409.2.3.5.5.1.3 | OCTET STRING | read-create | Mirror Group Dst Port List. It is presented by port list. Each port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of ports in destination port list of the mirror group, If the ONU is fixed (not modulized), set slot ID to 0, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of ports) For example, if port 1/2 and 3/4 is the destination ports of the mirror group, then the object is presented as: 01 02 03 04 |
| OCT uniMirrorGroupSrcInPortList | 1.3.6.1.4.1.17409.2.3.5.5.1.4 | OCTET STRING | read-create | Mirror Group Src In Port List. It is presented by port list. Each port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of ports in source ingress list of the mirror group, If the ONU is fixed (not modulized), set slot ID to 0, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of ports) For example, if port 1/2 and 3/4 is the source ingress ports of the mirror group, then the object is presented as: 01 02 03 04 |
| OCT uniMirrorGroupSrcOutPortList | 1.3.6.1.4.1.17409.2.3.5.5.1.5 | OCTET STRING | read-create | Mirror Group Src Out Port List. It is presented by port list. Each port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of ports in source egress list of the mirror group, If the ONU is fixed (not modulized), set slot ID to 0, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of ports) For example, if port 1/2 and 3/4 is the source egress ports of the mirror group, then the object is presented as: 01 02 03 04 |
| ROW uniMirrorGroupRowstatus | 1.3.6.1.4.1.17409.2.3.5.5.1.6 | RowStatus | read-create | Mirror Group Rowstatus |
| uniBroadcastStormSuppressionTable | 1.3.6.1.4.1.17409.2.3.5.6 | not-accessible | A list of BroadcastStormSuppression entries. | |
| uniBroadcastStormSuppressionEntry | 1.3.6.1.4.1.17409.2.3.5.6.1 | not-accessible | The Broadcast Storm Suppression Information | |
| EPO uniBroadcastStormSuppressionCardIndex | 1.3.6.1.4.1.17409.2.3.5.6.1.1 | EponCardIndex | not-accessible | card Index The value of this cardIndex depends on onuType. fixed(1) - set to 0, to indicate slot num is meaningless. chassisBased(2) - MUST NOT be zero |
| EPO uniBroadcastStormSuppressionPortIndex | 1.3.6.1.4.1.17409.2.3.5.6.1.2 | EponPortIndex | not-accessible | port Index |
| T/F uniUnicastStormEnable | 1.3.6.1.4.1.17409.2.3.5.6.1.3 | TruthValue | read-write | Cast Storm Enable |
| INT uniUnicastStormInPacketRate | 1.3.6.1.4.1.17409.2.3.5.6.1.4 | INTEGER | read-write | Cast Storm In Packet Rate |
| INT uniUnicastStormOutPacketRate | 1.3.6.1.4.1.17409.2.3.5.6.1.5 | INTEGER | read-write | Cast Storm Out Packet Rate |
| T/F uniMulticastStormEnable | 1.3.6.1.4.1.17409.2.3.5.6.1.6 | TruthValue | read-write | true(1) false(2) |
| INT uniMulticastStormInPacketRate | 1.3.6.1.4.1.17409.2.3.5.6.1.7 | INTEGER | read-write | Multicast Storm In Packet Rate |
| INT uniMulticastStormOutPacketRate | 1.3.6.1.4.1.17409.2.3.5.6.1.8 | INTEGER | read-write | Multicast Storm Out Packet Rate |
| T/F uniBroadcastStormEnable | 1.3.6.1.4.1.17409.2.3.5.6.1.9 | TruthValue | read-write | true(1) false(2) |
| INT uniBroadcastStormInPacketRate | 1.3.6.1.4.1.17409.2.3.5.6.1.10 | INTEGER | read-write | Broadcast Storm In Packet Rate |
| INT uniBroadcastStormOutPacketRate | 1.3.6.1.4.1.17409.2.3.5.6.1.11 | INTEGER | read-write | Broadcast Storm Out Packet Rate |
| uniExtAttributeTable | 1.3.6.1.4.1.17409.2.3.5.7 | not-accessible | The extended attribute list for each UNI. | |
| uniExtAttributeEntry | 1.3.6.1.4.1.17409.2.3.5.7.1 | not-accessible | ||
| EPO uniExtAttributeCardIndex | 1.3.6.1.4.1.17409.2.3.5.7.1.1 | EponCardIndex | not-accessible | Card index The value of this cardIndex depends on onuType. fixed(1) - set to 0, to indicate slot num is meaningless. chassisBased(2) - MUST NOT be zero |
| EPO uniExtAttributePortIndex | 1.3.6.1.4.1.17409.2.3.5.7.1.2 | EponPortIndex | not-accessible | |
| T/F uniPerfStats15minuteEnable | 1.3.6.1.4.1.17409.2.3.5.7.1.3 | TruthValue | read-write | true(1) false(2) |
| T/F uniPerfStats24hourEnable | 1.3.6.1.4.1.17409.2.3.5.7.1.4 | TruthValue | read-write | true(1) false(2) |
| TIK uniLastChangeTime | 1.3.6.1.4.1.17409.2.3.5.7.1.5 | TimeTicks | read-only | Last Change Time |
| T/F uniIsolationEnable | 1.3.6.1.4.1.17409.2.3.5.7.1.6 | TruthValue | read-write | true(1) false(2) |
| INT uniExMacAddrLearnMaxNum | 1.3.6.1.4.1.17409.2.3.5.7.1.7 | INTEGER | read-write | Mac Address Learn Max Num |
| INT uniAutoNegotiationAdvertisedTechAbility | 1.3.6.1.4.1.17409.2.3.5.7.1.8 | INTEGER | read-write | Refer to clause 30.6.1.1.6 of IEEE 802.3 2005 edition |
| INT uniMacAddrClearByPort | 1.3.6.1.4.1.17409.2.3.5.7.1.9 | INTEGER | read-write | Clear MAC address by UNI port. clearDynamic(1) - Clear all dynamic MAC address learned on the UNI port |
| igmpManagementObjects | 1.3.6.1.4.1.17409.2.3.6 | |||
| igmpEntityTable | 1.3.6.1.4.1.17409.2.3.6.1 | not-accessible | IGMP | |
| igmpEntityEntry | 1.3.6.1.4.1.17409.2.3.6.1.1 | not-accessible | ||
| INT igmpDeviceIndex | 1.3.6.1.4.1.17409.2.3.6.1.1.1 | INTEGER | not-accessible | For OLT, set to corresponding device For ONU, set to 0 |
| INT igmpMode | 1.3.6.1.4.1.17409.2.3.6.1.1.2 | INTEGER | read-write | IGMP centralized(1) - All the multicast control is done by OLT distributedwithcm(2) - Both OLT and ONU perform IGMP proxy and controlled multicast will be enabled. At this case, if igmp joins shall follow the definition in multicastPackageList, for the port disabled(3) - Disable IGMP proxy on OLT and ONU distributedwocm(4) - Both OLT and ONU perform IGMP proxy and controlled multicast will be disabled. At this case, if igmp joins shall be accept even violate the definition in multicastPackageList, for the port. |
| INT maxQueryResponseTime | 1.3.6.1.4.1.17409.2.3.6.1.1.3 | INTEGER | read-write | 1/10 This is used for sending general query |
| INT robustVariable | 1.3.6.1.4.1.17409.2.3.6.1.1.4 | INTEGER | read-write | This is used for sending general query No less than 1 |
| INT queryInterval | 1.3.6.1.4.1.17409.2.3.6.1.1.5 | INTEGER | read-write | This is used for sending general query |
| INT lastMemberQueryInterval | 1.3.6.1.4.1.17409.2.3.6.1.1.6 | INTEGER | read-write | Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages |
| INT lastMemberQueryCount | 1.3.6.1.4.1.17409.2.3.6.1.1.7 | INTEGER | read-write | Number of Group-Specific Queries sent before the router assumes there are no local members |
| INT igmpVersion | 1.3.6.1.4.1.17409.2.3.6.1.1.8 | INTEGER | read-write | IGMP |
| igmpProxyParaTable | 1.3.6.1.4.1.17409.2.3.6.2 | not-accessible | IGMP proxy - | |
| igmpProxyParaEntry | 1.3.6.1.4.1.17409.2.3.6.2.1 | not-accessible | ||
| INT proxyIndex | 1.3.6.1.4.1.17409.2.3.6.2.1.1 | INTEGER | not-accessible | IGMP Proxy - |
| OCT proxyName | 1.3.6.1.4.1.17409.2.3.6.2.1.2 | OCTET STRING | read-create | IGMP Proxy |
| IP proxySrcIPAddress | 1.3.6.1.4.1.17409.2.3.6.2.1.3 | IpAddress | read-create | proxyIP |
| INT proxyMulticastVID | 1.3.6.1.4.1.17409.2.3.6.2.1.4 | INTEGER | read-create | IGMP ProxyVID VID |
| IP proxyMulticastIPAddress | 1.3.6.1.4.1.17409.2.3.6.2.1.5 | IpAddress | read-create | IP |
| U32 multicastAssuredBW | 1.3.6.1.4.1.17409.2.3.6.2.1.6 | Unsigned32 | read-create | kbps |
| U32 multicastMaxBW | 1.3.6.1.4.1.17409.2.3.6.2.1.7 | Unsigned32 | read-create | kbps |
| ROW proxyRowStatus | 1.3.6.1.4.1.17409.2.3.6.2.1.8 | RowStatus | read-create | |
| igmpForwardingTable | 1.3.6.1.4.1.17409.2.3.6.3 | not-accessible | Multicast forwarding table | |
| igmpForwardingEntry | 1.3.6.1.4.1.17409.2.3.6.3.1 | not-accessible | ||
| INT groupDeviceIndex | 1.3.6.1.4.1.17409.2.3.6.3.1.1 | INTEGER | not-accessible | For OLT, set to corresponding OLT device For ONU, set to 0 |
| INT groupVlanIndex | 1.3.6.1.4.1.17409.2.3.6.3.1.2 | INTEGER | not-accessible | Vlan |
| IP groupIPAddress | 1.3.6.1.4.1.17409.2.3.6.3.1.3 | IpAddress | not-accessible | IP |
| OCT groupPortList | 1.3.6.1.4.1.17409.2.3.6.3.1.4 | OCTET STRING | read-only | Forwarding port list 1. OLT ------------------------------------------------------------------- It is presented by member port list. Each member port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of member ports in the port list. The relationship is: Length of the string = 4 * (NUM of member ports) For example, if device 1, port 1/2 and 2/3 is the member ports, then this object will be presented as: 01 01 02 00 01 02 03 00 2. ONU ------------------------------------------------------------------- It is presented by member port list. Each member port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of member ports. If the ONU is fixed (not modulized), set slot ID to 0, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of member ports) For example, if port 1/2 and 3/4 is the member ports of the group, then the object is presented as: 01 02 03 04 |
| controllededMulticastTable | 1.3.6.1.4.1.17409.2.3.6.4 | |||
| controlledMulticastUserAuthorityTable | 1.3.6.1.4.1.17409.2.3.6.4.1 | not-accessible | ||
| controlledMulticastUserAuthorityEntry | 1.3.6.1.4.1.17409.2.3.6.4.1.1 | not-accessible | ||
| EPO cmDeviceIndex | 1.3.6.1.4.1.17409.2.3.6.4.1.1.1 | EponDeviceIndex | not-accessible | For OLT, set to corresponding device/slot/port/ONU For ONU, set to 0 |
| EPO cmCardIndex | 1.3.6.1.4.1.17409.2.3.6.4.1.1.2 | EponCardIndex | not-accessible | Set to corresponding UNI slot |
| EPO cmPortIndex | 1.3.6.1.4.1.17409.2.3.6.4.1.1.3 | EponPortIndex | not-accessible | Port ID Set to corresponding UNI port |
| OCT multicastPackageList | 1.3.6.1.4.1.17409.2.3.6.4.1.1.4 | OCTET STRING | read-create | . cmProxyListbitcmIndex |
| U32 igmpGlobalBW | 1.3.6.1.4.1.17409.2.3.6.4.1.1.5 | Unsigned32 | read-create | IGMP - kbps |
| U32 igmpGlobalBWUsed | 1.3.6.1.4.1.17409.2.3.6.4.1.1.6 | Unsigned32 | read-only | IGMP - kbps |
| ROW cmUserAuthorityRowStatus | 1.3.6.1.4.1.17409.2.3.6.4.1.1.7 | RowStatus | read-create | |
| controlledMulticastPackageTable | 1.3.6.1.4.1.17409.2.3.6.4.2 | not-accessible | ||
| controlledMulticastPackageEntry | 1.3.6.1.4.1.17409.2.3.6.4.2.1 | not-accessible | ||
| INT cmIndex | 1.3.6.1.4.1.17409.2.3.6.4.2.1.1 | INTEGER | not-accessible | |
| OCT cmName | 1.3.6.1.4.1.17409.2.3.6.4.2.1.2 | OCTET STRING | read-create | |
| OCT cmProxyList | 1.3.6.1.4.1.17409.2.3.6.4.2.1.3 | OCTET STRING | read-create | Proxy INTERNETOCTETOCTET 0, OCTET 1, ... OCTETbitbit0bit1...bit7 bitOCTETbitigmpProxyParaTable proxyIndexbitproxyIndex 80proxyIndex1..8010 proxyPON1,15,38cmProxyList 0x80 02 00 00 04 00 00 00 00 00 |
| INT multicastUserAuthority | 1.3.6.1.4.1.17409.2.3.6.4.2.1.4 | INTEGER | read-create | permitpreviewdeny |
| INT maxRequestChannelNum | 1.3.6.1.4.1.17409.2.3.6.4.2.1.5 | INTEGER | read-create | |
| INT singlePreviewTime | 1.3.6.1.4.1.17409.2.3.6.4.2.1.6 | INTEGER | read-create | |
| INT totalPreviewTime | 1.3.6.1.4.1.17409.2.3.6.4.2.1.7 | INTEGER | read-create | |
| INT previewResetTime | 1.3.6.1.4.1.17409.2.3.6.4.2.1.8 | INTEGER | read-create | |
| INT previewCount | 1.3.6.1.4.1.17409.2.3.6.4.2.1.9 | INTEGER | read-create | |
| ROW cmRowStatus | 1.3.6.1.4.1.17409.2.3.6.4.2.1.10 | RowStatus | read-create | |
| igmpOnuUniTable | 1.3.6.1.4.1.17409.2.3.6.5 | not-accessible | A list of igmpOnuUniTable entries. | |
| igmpOnuUniEntry | 1.3.6.1.4.1.17409.2.3.6.5.1 | not-accessible | The igmpOnuUniEntry Information | |
| EPO uniMvlanDeviceIndex | 1.3.6.1.4.1.17409.2.3.6.5.1.1 | EponDeviceIndex | not-accessible | |
| EPO uniMvlanCardIndex | 1.3.6.1.4.1.17409.2.3.6.5.1.2 | EponCardIndex | not-accessible | |
| EPO uniMvlanPortIndex | 1.3.6.1.4.1.17409.2.3.6.5.1.3 | EponPortIndex | read-create | |
| OCT uniMvlanVid | 1.3.6.1.4.1.17409.2.3.6.5.1.4 | OCTET STRING | read-create | (unimvlan(1..4084))VLAN IDUNI8VLAN |
| INT uniMaxMultiNum | 1.3.6.1.4.1.17409.2.3.6.5.1.5 | INTEGER | read-create | |
| INT uniMvlanTag | 1.3.6.1.4.1.17409.2.3.6.5.1.6 | INTEGER | read-create | ,0 1 |
| INT uniMvlanRowstatus | 1.3.6.1.4.1.17409.2.3.6.5.1.7 | INTEGER | read-create | |
| igmpOltMulticastVlanTable | 1.3.6.1.4.1.17409.2.3.6.6 | not-accessible | OLT | |
| igmpOltMulticastVlanEntry | 1.3.6.1.4.1.17409.2.3.6.6.1 | not-accessible | ||
| INT igmpOltMulticastVlanDeviceIndex | 1.3.6.1.4.1.17409.2.3.6.6.1.1 | INTEGER | not-accessible | OLT device index |
| INT multicastVlanId | 1.3.6.1.4.1.17409.2.3.6.6.1.2 | INTEGER | read-write | OLT \u7f02\u509a\u5037\u7ec0\u4f7a\ufffd\u9853\u3220\u7bb0\u95bb\u2543\u5d56AN ID |
| INT mVlanMaxQueryResponseTime | 1.3.6.1.4.1.17409.2.3.6.6.1.3 | INTEGER | read-write | This is used for sending general query |
| INT mVlanRobustVariable | 1.3.6.1.4.1.17409.2.3.6.6.1.4 | INTEGER | read-write | This is used for sending general query No less than 1 |
| INT mVlanQueryInterval | 1.3.6.1.4.1.17409.2.3.6.6.1.5 | INTEGER | read-write | \u599e\u308e\u5053\u93b7\ufffd This is used for sending general query |
| INT mVlanLastMemberQueryInterval | 1.3.6.1.4.1.17409.2.3.6.6.1.6 | INTEGER | read-write | Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages |
| INT mVlanLastMemberQueryCount | 1.3.6.1.4.1.17409.2.3.6.6.1.7 | INTEGER | read-create | Number of Group-Specific Queries sent before the router assumes there are no local members |
| INT mvlanRowstatus | 1.3.6.1.4.1.17409.2.3.6.6.1.8 | INTEGER | read-create | |
| igmpSniMulticastVlanTable | 1.3.6.1.4.1.17409.2.3.6.7 | not-accessible | SNI | |
| igmpSniMulticastVlanEntry | 1.3.6.1.4.1.17409.2.3.6.7.1 | not-accessible | The igmpSniMulticastVlanEntry Information | |
| INT sniMultiVlanVid | 1.3.6.1.4.1.17409.2.3.6.7.1.1 | INTEGER | read-create | |
| EPO sniMultiVlanDeviceIndex | 1.3.6.1.4.1.17409.2.3.6.7.1.2 | EponDeviceIndex | not-accessible | SNI\u95c1\u8364\u59f3\u9412\ufe42\u5d15\u93b6\u527f\u56ec\ue517\u934c\u6db1\u703c\u95c1\u975b\u7e52\u6fee\u98ce\u7c9a\u9367\u6941\u7165\u6fde\u621e\ue7c7\u93c6\ue54bvice/slot/sni port |
| INT sniMultiVlanRowstatus | 1.3.6.1.4.1.17409.2.3.6.7.1.3 | INTEGER | read-create | |
| onuIgmpModeTable | 1.3.6.1.4.1.17409.2.3.6.8 | not-accessible | ONU | |
| onuIgmpModeEntry | 1.3.6.1.4.1.17409.2.3.6.8.1 | not-accessible | The onuIgmpModeEntry Information | |
| EPO onuIgmpModeDeviceIndex | 1.3.6.1.4.1.17409.2.3.6.8.1.1 | EponDeviceIndex | not-accessible | ONU ID |
| INT onuIgmpMode | 1.3.6.1.4.1.17409.2.3.6.8.1.2 | INTEGER | read-write | |
| vlanManagementObjects | 1.3.6.1.4.1.17409.2.3.7 | |||
| vlanGlobalInfoTable | 1.3.6.1.4.1.17409.2.3.7.1 | not-accessible | VLAN | |
| vlanGlobalInfoEntry | 1.3.6.1.4.1.17409.2.3.7.1.1 | not-accessible | ||
| INT vlanDeviceIndex | 1.3.6.1.4.1.17409.2.3.7.1.1.1 | INTEGER | not-accessible | For OLT, set to corresponding device ID For ONU, set to 0 |
| INT maxVlanId | 1.3.6.1.4.1.17409.2.3.7.1.1.2 | INTEGER | read-only | VLAN ID |
| INT maxSupportVlans | 1.3.6.1.4.1.17409.2.3.7.1.1.3 | INTEGER | read-only | VLAN |
| INT createdVlanNumber | 1.3.6.1.4.1.17409.2.3.7.1.1.4 | INTEGER | read-only | VLAN |
| vlanConfigGroup | 1.3.6.1.4.1.17409.2.3.7.2 | Vlan | ||
| oltVlanConfigTable | 1.3.6.1.4.1.17409.2.3.7.2.1 | not-accessible | OLT VLAN | |
| oltVlanConfigEntry | 1.3.6.1.4.1.17409.2.3.7.2.1.1 | not-accessible | ||
| INT oltVlanIndex | 1.3.6.1.4.1.17409.2.3.7.2.1.1.1 | INTEGER | not-accessible | Vlan |
| INT oltVlanDeviceIndex | 1.3.6.1.4.1.17409.2.3.7.2.1.1.2 | INTEGER | not-accessible | OLT |
| OCT oltVlanName | 1.3.6.1.4.1.17409.2.3.7.2.1.1.3 | OCTET STRING | read-create | OLT VLAN name |
| OCT taggedPort | 1.3.6.1.4.1.17409.2.3.7.2.1.1.4 | OCTET STRING | read-create | VlantagPON/SNI in OLT It is presented by member port list. Each member port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of member ports in the port list. The relationship is: Length of the string = 4 * (NUM of member ports) For example, if device 1, port 1/2 and 2/3 is the member ports, then this object will be presented as: 01 01 02 00 01 02 03 00 |
| OCT untaggedPort | 1.3.6.1.4.1.17409.2.3.7.2.1.1.5 | OCTET STRING | read-create | VlanUntagPON/SNI in OLT It is presented by member port list. Each member port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of member ports in the port list. The relationship is: Length of the string = 4 * (NUM of member ports) For example, if device 1, port 1/2 and 2/3 is the member ports, then this object will be presented as: 01 01 02 00 01 02 03 00 |
| ROW oltVlanRowStatus | 1.3.6.1.4.1.17409.2.3.7.2.1.1.6 | RowStatus | read-create | |
| onuVlanConfigTable | 1.3.6.1.4.1.17409.2.3.7.2.2 | not-accessible | ONU VLAN It is maintained by ONU itself. | |
| onuVlanConfigEntry | 1.3.6.1.4.1.17409.2.3.7.2.2.1 | not-accessible | ||
| INT onuVlanIndex | 1.3.6.1.4.1.17409.2.3.7.2.2.1.1 | INTEGER | not-accessible | Vlan |
| EPO onuVlanDeviceIndex | 1.3.6.1.4.1.17409.2.3.7.2.2.1.2 | EponDeviceIndex | not-accessible | ONU |
| OCT onuVlanName | 1.3.6.1.4.1.17409.2.3.7.2.2.1.3 | OCTET STRING | read-create | ONU VLAN name |
| OCT onuVlanTaggedPort | 1.3.6.1.4.1.17409.2.3.7.2.2.1.4 | OCTET STRING | read-create | VlantagUNI It is presented by member port list. Each member port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of tagged member ports in the VLAN. If the ONU is fixed (not modulized), set slot ID to 0, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of member ports) For example, if port 1/2 and 3/4 is the tagged member ports of the VLAN, then the object is presented as: 01 02 03 04 |
| OCT onuVlanUntaggedPort | 1.3.6.1.4.1.17409.2.3.7.2.2.1.5 | OCTET STRING | read-create | VlanUntagUNI It is presented by member port list. Each member port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of untagged member ports in the VLAN. If the ONU is fixed (not modulized), set slot ID to FF, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of member ports) For example, if port 1/2 and 3/4 is the untagged member ports of the VLAN, then the object is presented as: 01 02 03 04 |
| ROW onuVlanRowStatus | 1.3.6.1.4.1.17409.2.3.7.2.2.1.6 | RowStatus | read-create | |
| portVlanGroup | 1.3.6.1.4.1.17409.2.3.7.3 | Vlansniuniponport | ||
| onuPortortVlanTable | 1.3.6.1.4.1.17409.2.3.7.3.1 | not-accessible | Vlan This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pvlanDeviceIndex shall be set to 0, /OLT SNI pvlanCardIndex, and pvlanPortIndex set to 0 indicates meaningless OLT onu ID - Set pvlanDeviceIndex to corresponding ONU ID, pvlanCardIndex, and pvlanPortIndex set to 0 indicates meaningless ONU UNI - Set pvlanDeviceIndex to corresponding ONU ID, pvlanCardIndex, and pvlanPortIndex set to the corresponding value 2. If the table is maintained in ONU device: pvlanDeviceIndex shall be set to 0 to indicate meaningless. pvlanCardIndex shall be set to corresponding slot. pvlanPortIndex shall be set to corresponding port. | |
| onuPortVlanEntry | 1.3.6.1.4.1.17409.2.3.7.3.1.1 | not-accessible | ||
| EPO pvlanDeviceIndex | 1.3.6.1.4.1.17409.2.3.7.3.1.1.1 | EponDeviceIndex | not-accessible | OLT/ONU |
| EPO pvlanCardIndex | 1.3.6.1.4.1.17409.2.3.7.3.1.1.2 | EponCardIndex | not-accessible | |
| EPO pvlanPortIndex | 1.3.6.1.4.1.17409.2.3.7.3.1.1.3 | EponPortIndex | not-accessible | pon/uni/sni |
| OCT vlanTagTpid | 1.3.6.1.4.1.17409.2.3.7.3.1.1.4 | OCTET STRING | read-write | It shall be presented in hexadecimal format. For example, 81 00 to indicate 0x8100 |
| T/F vlanTagCfi | 1.3.6.1.4.1.17409.2.3.7.3.1.1.5 | TruthValue | read-write | |
| INT vlanTagPriority | 1.3.6.1.4.1.17409.2.3.7.3.1.1.6 | INTEGER | read-write | vlan |
| INT vlanPVid | 1.3.6.1.4.1.17409.2.3.7.3.1.1.7 | INTEGER | read-write | port Vlan ID |
| INT vlanMode | 1.3.6.1.4.1.17409.2.3.7.3.1.1.8 | INTEGER | read-write | vlan |
| portVlanTranslationTable | 1.3.6.1.4.1.17409.2.3.7.3.2 | not-accessible | Vlan This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pvtDeviceIndex shall be set to 0, /OLT SNI pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless OLT onu ID - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless ONU UNI - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to the corresponding value 2. If the table is maintained in ONU device: pvtDeviceIndex shall be set to 0 to indicate meaningless. pvtCardIndex shall be set to corresponding slot. pvtPortIndex shall be set to corresponding port. | |
| portVlanTranslationEntry | 1.3.6.1.4.1.17409.2.3.7.3.2.1 | not-accessible | ||
| EPO pvtDeviceIndex | 1.3.6.1.4.1.17409.2.3.7.3.2.1.1 | EponDeviceIndex | not-accessible | OLT/ONU |
| EPO pvtCardIndex | 1.3.6.1.4.1.17409.2.3.7.3.2.1.2 | EponCardIndex | not-accessible | |
| EPO pvtPortIndex | 1.3.6.1.4.1.17409.2.3.7.3.2.1.3 | EponPortIndex | not-accessible | pon/ONU/uni/sni |
| U32 portVidIndex | 1.3.6.1.4.1.17409.2.3.7.3.2.1.4 | Unsigned32 | not-accessible | VLAN ID |
| U32 translationNewVid | 1.3.6.1.4.1.17409.2.3.7.3.2.1.5 | Unsigned32 | read-create | vlan |
| ROW translationRowStatus | 1.3.6.1.4.1.17409.2.3.7.3.2.1.6 | RowStatus | read-create | |
| portVlanAggregationManagement | 1.3.6.1.4.1.17409.2.3.7.3.3 | VlanVLAN Aggregation | ||
| portVlanAggregationConfigTable | 1.3.6.1.4.1.17409.2.3.7.3.3.1 | not-accessible | Vlan This table applies on OLT pon port, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pvaDeviceIndex shall be set to 0, pvaCardIndex, and pvaPortIndex set to 0 indicates meaningless OLT onu ID - Set pvaDeviceIndex to corresponding ONU ID, pvaCardIndex, and pvaPortIndex set to 0 indicates meaningless ONU UNI - Set pvaDeviceIndex to corresponding ONU ID, pvaCardIndex, and pvaPortIndex set to the corresponding value 2. If the table is maintained in ONU device: pvaDeviceIndex shall be set to 0 to indicate meaningless. pvaCardIndex shall be set to corresponding slot. pvaPortIndex shall be set to corresponding port. | |
| portVlanAggregationConfigEntry | 1.3.6.1.4.1.17409.2.3.7.3.3.1.1 | not-accessible | ||
| EPO pvaDeviceIndex | 1.3.6.1.4.1.17409.2.3.7.3.3.1.1.1 | EponDeviceIndex | not-accessible | OLT/ONU |
| EPO pvaCardIndex | 1.3.6.1.4.1.17409.2.3.7.3.3.1.1.2 | EponCardIndex | not-accessible | |
| EPO pvaPortIndex | 1.3.6.1.4.1.17409.2.3.7.3.3.1.1.3 | EponPortIndex | not-accessible | pon/uni/ONU ID |
| U32 portAggregationVidIndex | 1.3.6.1.4.1.17409.2.3.7.3.3.1.1.4 | Unsigned32 | not-accessible | VLANVLAN |
| OCT aggregationVidList | 1.3.6.1.4.1.17409.2.3.7.3.3.1.1.5 | OCTET STRING | read-create | vlan ID INTERNETOCTETOCTET 0, OCTET 1, ... OCTETbitbit0bit1...bit7 bitOCTETbitVLANVLAN ID0..4095 bitVLAN 0,bitVLAN 4095 bitVLAN |
| ROW aggregationRowStatus | 1.3.6.1.4.1.17409.2.3.7.3.3.1.1.6 | RowStatus | read-create | |
| portVlanTrunkTable | 1.3.6.1.4.1.17409.2.3.7.3.4 | not-accessible | Vlan trunkVLAN Trunk? This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pvtDeviceIndex shall be set to 0, /OLT SNI pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless OLT onu ID - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to 0 indicates meaningless ONU UNI - Set pvtDeviceIndex to corresponding ONU ID, pvtCardIndex, and pvtPortIndex set to the corresponding value 2. If the table is maintained in ONU device: pvtDeviceIndex shall be set to 0 to indicate meaningless. pvtCardIndex shall be set to corresponding slot. pvtPortIndex shall be set to corresponding port. | |
| portVlanTrunkEntry | 1.3.6.1.4.1.17409.2.3.7.3.4.1 | not-accessible | ||
| EPO trunkDeviceIndex | 1.3.6.1.4.1.17409.2.3.7.3.4.1.1 | EponDeviceIndex | not-accessible | |
| EPO trunkCardIndex | 1.3.6.1.4.1.17409.2.3.7.3.4.1.2 | EponCardIndex | not-accessible | |
| EPO trunkPortIndex | 1.3.6.1.4.1.17409.2.3.7.3.4.1.3 | EponPortIndex | not-accessible | |
| OCT trunkVidList | 1.3.6.1.4.1.17409.2.3.7.3.4.1.4 | OCTET STRING | read-create | Trunked Vlan List for the port INTERNETOCTETOCTET 0, OCTET 1, ... OCTETbitbit0bit1...bit7 bitOCTETbitVLANVLAN ID0..4095 bitVLAN 0,bitVLAN 4095 bitVLAN |
| ROW portVlanTrunkRowStatus | 1.3.6.1.4.1.17409.2.3.7.3.4.1.5 | RowStatus | read-create | |
| oltPortVlanTable | 1.3.6.1.4.1.17409.2.3.7.3.5 | not-accessible | SNI/PON\u7f02\u5099\u7126\u59ab\u5fdb\u5d39\u93b7\u5c7b\u4eb9\u6fde\u5c7d\u57d0an\u95c1\u8364\u505e\u9350\u5a5a\u5e4f\u951f\ufffd This table applies on OLT pon port, OLT SNI Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port/OLT SNI - OnuNum of pvlanDeviceIndex shall be set to 0 | |
| oltPortVlanEntry | 1.3.6.1.4.1.17409.2.3.7.3.5.1 | not-accessible | ||
| EPO oltPortVlanDeviceIndex | 1.3.6.1.4.1.17409.2.3.7.3.5.1.1 | EponDeviceIndex | not-accessible | SNI/PON port |
| INT oltPortVlanTagPriority | 1.3.6.1.4.1.17409.2.3.7.3.5.1.2 | INTEGER | read-write | vlan |
| INT oltPortVlanPVid | 1.3.6.1.4.1.17409.2.3.7.3.5.1.3 | INTEGER | read-write | port Vlan ID |
| INT oltPortVlanMode | 1.3.6.1.4.1.17409.2.3.7.3.5.1.4 | INTEGER | read-write | vlan\u6fe0\u7898\u69c5\u9368\ue048\u6553\u9423\u5c7e\ue78f\u95bf\u71c2\u62f7 |
| qinQConfigGroup | 1.3.6.1.4.1.17409.2.3.7.4 | QinQ OLT/ONUQINQOLTONU | ||
| portQinQConfigTable | 1.3.6.1.4.1.17409.2.3.7.4.1 | not-accessible | QinQ This table applies on OLT pon port, OLT SNI, OLT onu ID, ONU UNI. 1. If the table is maintained in OLT device: Applied Obj - Descriptions of Index ------------------------------------------------------------------ OLT Pon Port - OnuNum of pqDeviceIndex shall be set to 0, /OLT SNI pqCardIndex, and pqPortIndex set to 0 indicates meaningless OLT onu ID - Set pqDeviceIndex to corresponding ONU ID, pqCardIndex, and pqPortIndex set to 0 indicates meaningless ONU UNI - Set pqDeviceIndex to corresponding ONU ID, pqCardIndex, and pqPortIndex set to the corresponding value 2. If the table is maintained in ONU device: pqDeviceIndex shall be set to 0 to indicate meaningless. pqCardIndex shall be set to corresponding slot. pqPortIndex shall be set to corresponding port. | |
| portQinQConfigEntry | 1.3.6.1.4.1.17409.2.3.7.4.1.1 | not-accessible | ||
| EPO pqDeviceIndex | 1.3.6.1.4.1.17409.2.3.7.4.1.1.1 | EponDeviceIndex | not-accessible | ONU ID, for a specific ONU |
| EPO pqCardIndex | 1.3.6.1.4.1.17409.2.3.7.4.1.1.2 | EponCardIndex | not-accessible | |
| EPO pqPortIndex | 1.3.6.1.4.1.17409.2.3.7.4.1.1.3 | EponPortIndex | not-accessible | |
| INT pqStartVlanId | 1.3.6.1.4.1.17409.2.3.7.4.1.1.4 | INTEGER | not-accessible | The starting VLAN ID, working together with pqEndVlanId, consists of a VLAN group. The VLAN ID match the VLAN group will be QinQed with specified outer VLAN |
| INT pqEndVlanId | 1.3.6.1.4.1.17409.2.3.7.4.1.1.5 | INTEGER | not-accessible | The ending VLAN ID, working together with pqStartVlanId, consists of a VLAN range. The VLAN ID match the VLAN range will be QinQed with specified outer VLAN |
| INT pqSVlanId | 1.3.6.1.4.1.17409.2.3.7.4.1.1.6 | INTEGER | read-create | The outer VLAN id to be QinQed |
| INT pqSTagCosDetermine | 1.3.6.1.4.1.17409.2.3.7.4.1.1.7 | INTEGER | read-create | What STAG COS will be set for this QinQ instance. It could be either a new definition or copied from CTAG |
| INT pqSTagCosNewValue | 1.3.6.1.4.1.17409.2.3.7.4.1.1.8 | INTEGER | read-create | The new STAG COS value if pqSTagCosDetermine is selected as redefine(1) |
| ROW pqRowStatus | 1.3.6.1.4.1.17409.2.3.7.4.1.1.9 | RowStatus | read-create | |
| qosManagementObjects | 1.3.6.1.4.1.17409.2.3.8 | |||
| qosGlobalSetTable | 1.3.6.1.4.1.17409.2.3.8.1 | not-accessible | Global QoS parameters. | |
| qosGlobalSetEntry | 1.3.6.1.4.1.17409.2.3.8.1.1 | not-accessible | ||
| EPO qosGlobalSetDeviceIndex | 1.3.6.1.4.1.17409.2.3.8.1.1.1 | EponDeviceIndex | not-accessible | Device index For OLT - Set to corresponding device For ONU - Set to 0 |
| INT qosGlobalSetMaxQueueCount | 1.3.6.1.4.1.17409.2.3.8.1.1.2 | INTEGER | read-only | 80-7 |
| INT qosGlobalSetMode | 1.3.6.1.4.1.17409.2.3.8.1.1.3 | INTEGER | read-write | Define how to set QoS parameter deviceBased(1) - When set, only the table started with deviceBase is applicable portBased(2) - When set, only the table started with portBase is applicable |
| deviceBaseQosMapTable | 1.3.6.1.4.1.17409.2.3.8.2 | not-accessible | Deviced based setting. It is used to define how to map QoS options to queue | |
| deviceBaseQosMapEntry | 1.3.6.1.4.1.17409.2.3.8.2.1 | not-accessible | ||
| EPO deviceBaseQosMapDeviceIndex | 1.3.6.1.4.1.17409.2.3.8.2.1.1 | EponDeviceIndex | not-accessible | Device index For OLT - Set to corresponding device For ONU - Set to 0 |
| INT deviceBaseQosMapRuleIndex | 1.3.6.1.4.1.17409.2.3.8.2.1.2 | INTEGER | not-accessible | |
| OCT deviceBaseQosMapOctet | 1.3.6.1.4.1.17409.2.3.8.2.1.3 | OCTET STRING | read-write | 864 qosGlobalSetMaxQueueCountqosGlobalSetMaxQueueCount80-7 cos 8cos0-7 tos 16tos0-15 diffserv64diffserv0-63 get 1.3.6.1.4.1.17409.2.3.8.3.1.3.deviceBaseQosMapDeviceIndex(410100101).cos(1) = hex(00 00 01 02 03 03 04 04) cos 0 -> queue 0 cos 1 -> queue 0 cos 2 -> queue 1 cos 3 -> queue 2 cos 4 -> queue 3 cos 5 -> queue 3 cos 6 -> queue 4 cos 7 -> queue 4 |
| deviceBaseQosPolicyTable | 1.3.6.1.4.1.17409.2.3.8.3 | not-accessible | Deviced based setting It is used to define QoS specification | |
| deviceBaseQosPolicyEntry | 1.3.6.1.4.1.17409.2.3.8.3.1 | not-accessible | ||
| EPO deviceBaseQosPolicyDeviceIndex | 1.3.6.1.4.1.17409.2.3.8.3.1.1 | EponDeviceIndex | not-accessible | Device index For OLT - Set to corresponding device For ONU - Set to 0 |
| INT deviceBaseQosPolicyMode | 1.3.6.1.4.1.17409.2.3.8.3.1.2 | INTEGER | read-write | |
| OCT deviceBaseQosPolicyWeightOctet | 1.3.6.1.4.1.17409.2.3.8.3.1.3 | OCTET STRING | read-write | sp0 wrr1-100100 spWrr0-1000sp0100 wfp0 get 1.3.6.1.4.1.17409.2.3.8.4.1.2.deviceBaseQosPolicyDeviceIndex(410100101). = wrr(2) get 1.3.6.1.4.1.17409.2.3.8.4.1.3.deviceBaseQosPolicyDeviceIndex(410100101). = hex(5 5 5 5 10 20 20 30) 8 queue 0 5 queue 1 5 queue 2 5 queue 3 5 queue 4 10 queue 5 20 queue 6 20 queue 7 30 |
| OCT deviceBaseQosPolicySpBandwidthRange | 1.3.6.1.4.1.17409.2.3.8.3.1.4 | OCTET STRING | read-write | Define SP assured bandwidth for each queue. The size of this object is 4*(number of queue). For each queue, use 4 octets to represend the assured bandwidth for the queue. The four-octet could be mapped to an unsigned integer, in units of kbps. The sequence of the map is from queue 0 to queue max (for example, 7). For example, 00 00 00 10 00 00 01 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 01 00 01 01 00 00 00 11 11 It means, 8 queues and the assured bandwidth for each queue as: queue 0 16kbps queue 1 256kbps queue 2 0 queue 3 0 queue 4 4096kbps queue 5 1kbps queue 6 65792kbps queue 7 65535kbps |
| portBaseQosMapTable | 1.3.6.1.4.1.17409.2.3.8.4 | not-accessible | ||
| portBaseQosMapEntry | 1.3.6.1.4.1.17409.2.3.8.4.1 | not-accessible | ||
| EPO portBaseQosMapDeviceIndex | 1.3.6.1.4.1.17409.2.3.8.4.1.1 | EponDeviceIndex | not-accessible | Device index For OLT, set to corresponding SNI port or PON port For ONU, set to 0 |
| EPO portBaseQosMapCardIndex | 1.3.6.1.4.1.17409.2.3.8.4.1.2 | EponPortIndex | not-accessible | For OLT, set to 0 For ONU, set to corresponding slot |
| EPO portBaseQosMapPortIndex | 1.3.6.1.4.1.17409.2.3.8.4.1.3 | EponPortIndex | not-accessible | For OLT, set to 0 For ONU, set to corresponding port |
| INT portBaseQosMapRuleIndex | 1.3.6.1.4.1.17409.2.3.8.4.1.4 | INTEGER | not-accessible | |
| OCT portBaseQosMapOctet | 1.3.6.1.4.1.17409.2.3.8.4.1.5 | OCTET STRING | read-write | 864 qosGlobalSetMaxQueueCountqosGlobalSetMaxQueueCount80-7 cos 8cos0-7 tos 16tos0-16 diffserv64diffserv0-64 get 1.3.6.1.4.1.17409.2.3.8.3.1.3.deviceBaseQosMapDeviceIndex(410100101).cos(1) = hex(00 00 01 02 03 03 04 04) cos 0 -> queue 0 cos 1 -> queue 0 cos 2 -> queue 1 cos 3 -> queue 2 cos 4 -> queue 3 cos 5 -> queue 3 cos 6 -> queue 4 cos 7 -> queue 4 |
| portBaseQosPolicyTable | 1.3.6.1.4.1.17409.2.3.8.5 | not-accessible | Description. | |
| portBaseQosPolicyEntry | 1.3.6.1.4.1.17409.2.3.8.5.1 | not-accessible | ||
| EPO portBaseQosPolicyDeviceIndex | 1.3.6.1.4.1.17409.2.3.8.5.1.1 | EponDeviceIndex | not-accessible | Device index For OLT, set to corresponding SNI port or PON port For ONU, set to 0 |
| EPO portBaseQosPolicyCardIndex | 1.3.6.1.4.1.17409.2.3.8.5.1.2 | EponPortIndex | not-accessible | For OLT, set to 0 For ONU, set to corresponding slot |
| EPO portBaseQosPolicyPortIndex | 1.3.6.1.4.1.17409.2.3.8.5.1.3 | EponPortIndex | not-accessible | For OLT, set to 0 For ONU, set to corresponding port |
| INT portBaseQosPolicyMode | 1.3.6.1.4.1.17409.2.3.8.5.1.4 | INTEGER | read-write | sp wrr spWrr sp+wrr wfp |
| OCT portBaseQosPolicyWeightOctet | 1.3.6.1.4.1.17409.2.3.8.5.1.5 | OCTET STRING | read-write | sp0 wrr1-100100 spWrr0-1000sp0100 wfp0 get 1.3.6.1.4.1.17409.2.3.8.4.1.2.deviceBaseQosPolicyDeviceIndex(410100101). = wrr(2) get 1.3.6.1.4.1.17409.2.3.8.4.1.3.deviceBaseQosPolicyDeviceIndex(410100101). = hex(5 5 5 5 10 20 20 30) 8 queue 0 5 queue 1 5 queue 2 5 queue 3 5 queue 4 10 queue 5 20 queue 6 20 queue 7 30 |
| OCT portBaseQosPolicySpBandwidthRange | 1.3.6.1.4.1.17409.2.3.8.5.1.6 | OCTET STRING | read-write | Define SP assured bandwidth for each queue. The size of this object is 4*(number of queue). For each queue, use 4 octets to represend the assured bandwidth for the queue. The four-octet could be mapped to an unsigned integer, in units of kbps. The sequence of the map is from queue 0 to queue max (for example, 7). For example, 00 00 00 10 00 00 01 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 01 00 01 01 00 00 00 11 11 It means, 8 queues and the assured bandwidth for each queue as: queue 0 16kbps queue 1 256kbps queue 2 0 queue 3 0 queue 4 4096kbps queue 5 1kbps queue 6 65792kbps queue 7 65535kbps |
| stpManagementObjects | 1.3.6.1.4.1.17409.2.3.9 | |||
| stpGlobalSetTable | 1.3.6.1.4.1.17409.2.3.9.1 | not-accessible | STP | |
| stpGlobalSetEntry | 1.3.6.1.4.1.17409.2.3.9.1.1 | not-accessible | ||
| C32 stpGlobalSetIndex | 1.3.6.1.4.1.17409.2.3.9.1.1.1 | Counter32 | not-accessible | For OLT - Set to corresponding device For ONU - Set to 0 |
| INT stpGlobalSetVersion | 1.3.6.1.4.1.17409.2.3.9.1.1.2 | INTEGER | read-write | |
| INT stpGlobalSetPriority | 1.3.6.1.4.1.17409.2.3.9.1.1.3 | INTEGER | read-write | IEEE 802.1dIEEE 802.1w0-614404096 |
| TIK stpGlobalSetTimeSinceTopologyChange | 1.3.6.1.4.1.17409.2.3.9.1.1.4 | TimeTicks | read-only | |
| C32 stpGlobalSetTopChanges | 1.3.6.1.4.1.17409.2.3.9.1.1.5 | Counter32 | read-only | |
| BRI stpGlobalSetDesignatedRoot | 1.3.6.1.4.1.17409.2.3.9.1.1.6 | BridgeId | read-only | BridgeId |
| INT stpGlobalSetRootCost | 1.3.6.1.4.1.17409.2.3.9.1.1.7 | INTEGER | read-only | |
| OCT stpGlobalSetRootPort | 1.3.6.1.4.1.17409.2.3.9.1.1.8 | OCTET STRING | read-only | The port is presented by three octets, in sequence of device ID, slot, and port. For ONU, device ID is meaningless and shall set 0. Slot and port shall be set to corresponding value. For OLT, device ID, slot, and port shall be set to corresponding value. For example, 01 02 03 means device 1, slot 2, port 3 is root port. 0x00 04 05 means ONU slot 4, port 5 is root port. |
| TIM stpGlobalSetMaxAge | 1.3.6.1.4.1.17409.2.3.9.1.1.9 | Timeout | read-only | 1/100 secs |
| TIM stpGlobalSetHelloTime | 1.3.6.1.4.1.17409.2.3.9.1.1.10 | Timeout | read-only | PDU |
| INT stpGlobalSetHoldTime | 1.3.6.1.4.1.17409.2.3.9.1.1.11 | INTEGER | read-only | PDU |
| TIM stpGlobalSetForwardDelay | 1.3.6.1.4.1.17409.2.3.9.1.1.12 | Timeout | read-only | |
| TIM stpGlobalSetBridgeMaxAge | 1.3.6.1.4.1.17409.2.3.9.1.1.13 | Timeout | read-write | |
| TIM stpGlobalSetBridgeHelloTime | 1.3.6.1.4.1.17409.2.3.9.1.1.14 | Timeout | read-write | |
| TIM stpGlobalSetBridgeForwardDelay | 1.3.6.1.4.1.17409.2.3.9.1.1.15 | Timeout | read-write | |
| INT stpGlobalSetRstpTxHoldCount | 1.3.6.1.4.1.17409.2.3.9.1.1.16 | INTEGER | read-write | RSTP |
| T/F stpGlobalSetEnable | 1.3.6.1.4.1.17409.2.3.9.1.1.17 | TruthValue | read-write | STPtrue(1) |
| stpPortTable | 1.3.6.1.4.1.17409.2.3.9.2 | not-accessible | STP | |
| stpPortEntry | 1.3.6.1.4.1.17409.2.3.9.2.1 | not-accessible | ||
| EPO stpPortStpIndex | 1.3.6.1.4.1.17409.2.3.9.2.1.1 | EponDeviceIndex | not-accessible | For OLT - Set to corresponding device/SLOT/PORT For ONU - Set to 0 |
| EPO stpPortCardIndex | 1.3.6.1.4.1.17409.2.3.9.2.1.2 | EponCardIndex | not-accessible | Epon For OLT, set to 0 For ONU, set to correspond card index |
| EPO stpPortIndex | 1.3.6.1.4.1.17409.2.3.9.2.1.3 | EponPortIndex | not-accessible | OLTSNI/PON portONUUNI For OLT, set to 0 For ONU, set to correspond port index |
| INT stpPortStatus | 1.3.6.1.4.1.17409.2.3.9.2.1.4 | INTEGER | read-only | STPdisable |
| INT stpPortPriority | 1.3.6.1.4.1.17409.2.3.9.2.1.5 | INTEGER | read-write | |
| INT stpPortPathCost | 1.3.6.1.4.1.17409.2.3.9.2.1.6 | INTEGER | read-write | 802.1D-1998LAN |
| BRI stpPortDesignatedRoot | 1.3.6.1.4.1.17409.2.3.9.2.1.7 | BridgeId | read-only | BPDUBPDU |
| INT stpPortDesignatedCost | 1.3.6.1.4.1.17409.2.3.9.2.1.8 | INTEGER | read-only | PDU |
| BRI stpPortDesignatedBridge | 1.3.6.1.4.1.17409.2.3.9.2.1.9 | BridgeId | read-only | ID |
| G32 stpPortDesignatedPort | 1.3.6.1.4.1.17409.2.3.9.2.1.10 | Gauge32 | read-only | |
| U32 stpPortForwardTransitions | 1.3.6.1.4.1.17409.2.3.9.2.1.11 | Unsigned32 | read-only | |
| T/F stpPortRstpProtocolMigration | 1.3.6.1.4.1.17409.2.3.9.2.1.12 | TruthValue | read-write | RSTPTRUE(1)RSTP BPDUFALSE(2) |
| T/F stpPortRstpAdminEdgePort | 1.3.6.1.4.1.17409.2.3.9.2.1.13 | TruthValue | read-write | stpPortRstpOperEdgePort true(1)BPDUstpPortRstpOperEdgePortfalse(2) |
| T/F stpPortRstpOperEdgePort | 1.3.6.1.4.1.17409.2.3.9.2.1.14 | TruthValue | read-only | stpPortRstpAdminEdgePortBPDUfalse(2) |
| INT stpPortPointToPointAdminStatus | 1.3.6.1.4.1.17409.2.3.9.2.1.15 | INTEGER | read-write | |
| T/F stpPortPointToPointOperStatus | 1.3.6.1.4.1.17409.2.3.9.2.1.16 | TruthValue | read-only | |
| T/F stpPortEnabled | 1.3.6.1.4.1.17409.2.3.9.2.1.17 | TruthValue | read-write | true(1) |
| performanceStatisticObjects | 1.3.6.1.4.1.17409.2.3.10 | |||
| curStatsTable | 1.3.6.1.4.1.17409.2.3.10.1 | not-accessible | ||
| curStatsEntry | 1.3.6.1.4.1.17409.2.3.10.1.1 | not-accessible | ||
| EPO curStatsDeviceIndex | 1.3.6.1.4.1.17409.2.3.10.1.1.1 | EponDeviceIndex | not-accessible | For OLT, set to corresponding device/slot/port For ONU, set to 0 |
| EPO curStatsCardIndex | 1.3.6.1.4.1.17409.2.3.10.1.1.2 | EponCardIndex | not-accessible | For OLT, set to 0 For ONU, set to corresponding slot |
| EPO curStatsPortIndex | 1.3.6.1.4.1.17409.2.3.10.1.1.3 | EponPortIndex | not-accessible | For OLT, set to 0 For ONU, set to corresponding port |
| C64 curStatsInOctets | 1.3.6.1.4.1.17409.2.3.10.1.1.4 | Counter64 | read-only | |
| C64 curStatsInPkts | 1.3.6.1.4.1.17409.2.3.10.1.1.5 | Counter64 | read-only | |
| C64 curStatsInBroadcastPkts | 1.3.6.1.4.1.17409.2.3.10.1.1.6 | Counter64 | read-only | |
| C64 curStatsInMulticastPkts | 1.3.6.1.4.1.17409.2.3.10.1.1.7 | Counter64 | read-only | |
| C64 curStatsInPkts64Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.8 | Counter64 | read-only | 64 |
| C64 curStatsInPkts65to127Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.9 | Counter64 | read-only | 65127 |
| C64 curStatsInPkts128to255Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.10 | Counter64 | read-only | 128255 |
| C64 curStatsInPkts256to511Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.11 | Counter64 | read-only | 256511 |
| C64 curStatsInPkts512to1023Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.12 | Counter64 | read-only | 5121023 |
| C64 curStatsInPkts1024to1518Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.13 | Counter64 | read-only | 10241518 |
| C64 curStatsInPkts1519to1522Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.14 | Counter64 | read-only | 15191522 |
| C64 curStatsInUndersizePkts | 1.3.6.1.4.1.17409.2.3.10.1.1.15 | Counter64 | read-only | |
| C64 curStatsInOversizePkts | 1.3.6.1.4.1.17409.2.3.10.1.1.16 | Counter64 | read-only | |
| C64 curStatsInFragments | 1.3.6.1.4.1.17409.2.3.10.1.1.17 | Counter64 | read-only | |
| C64 curStatsInMpcpFrames | 1.3.6.1.4.1.17409.2.3.10.1.1.18 | Counter64 | read-only | MPCP |
| C64 curStatsInMpcpOctets | 1.3.6.1.4.1.17409.2.3.10.1.1.19 | Counter64 | read-only | MPCP |
| C64 curStatsInOAMFrames | 1.3.6.1.4.1.17409.2.3.10.1.1.20 | Counter64 | read-only | OAM |
| C64 curStatsInOAMOctets | 1.3.6.1.4.1.17409.2.3.10.1.1.21 | Counter64 | read-only | OAM |
| C64 curStatsInCRCErrorPkts | 1.3.6.1.4.1.17409.2.3.10.1.1.22 | Counter64 | read-only | CRC |
| C64 curStatsInDropEvents | 1.3.6.1.4.1.17409.2.3.10.1.1.23 | Counter64 | read-only | |
| C64 curStatsInJabbers | 1.3.6.1.4.1.17409.2.3.10.1.1.24 | Counter64 | read-only | |
| C64 curStatsInCollision | 1.3.6.1.4.1.17409.2.3.10.1.1.25 | Counter64 | read-only | |
| C64 curStatsOutOctets | 1.3.6.1.4.1.17409.2.3.10.1.1.26 | Counter64 | read-only | |
| C64 curStatsOutPkts | 1.3.6.1.4.1.17409.2.3.10.1.1.27 | Counter64 | read-only | |
| C64 curStatsOutBroadcastPkts | 1.3.6.1.4.1.17409.2.3.10.1.1.28 | Counter64 | read-only | |
| C64 curStatsOutMulticastPkts | 1.3.6.1.4.1.17409.2.3.10.1.1.29 | Counter64 | read-only | |
| C64 curStatsOutPkts64Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.30 | Counter64 | read-only | 64 |
| C64 curStatsOutPkts65to127Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.31 | Counter64 | read-only | 65127 |
| C64 curStatsOutPkts128to255Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.32 | Counter64 | read-only | 128255 |
| C64 curStatsOutPkts256to511Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.33 | Counter64 | read-only | 256511 |
| C64 curStatsOutPkts512to1023Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.34 | Counter64 | read-only | 5121023 |
| C64 curStatsOutPkts1024to1518Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.35 | Counter64 | read-only | 10241518 |
| C64 curStatsOutPkts1519o1522Octets | 1.3.6.1.4.1.17409.2.3.10.1.1.36 | Counter64 | read-only | 15191522 |
| C64 curStatsOutUndersizePkts | 1.3.6.1.4.1.17409.2.3.10.1.1.37 | Counter64 | read-only | |
| C64 curStatsOutOversizePkts | 1.3.6.1.4.1.17409.2.3.10.1.1.38 | Counter64 | read-only | |
| C64 curStatsOutFragments | 1.3.6.1.4.1.17409.2.3.10.1.1.39 | Counter64 | read-only | |
| C64 curStatsOutMpcpFrames | 1.3.6.1.4.1.17409.2.3.10.1.1.40 | Counter64 | read-only | MPCP |
| C64 curStatsOutMpcpOctets | 1.3.6.1.4.1.17409.2.3.10.1.1.41 | Counter64 | read-only | MPCP |
| C64 curStatsOutOAMFrames | 1.3.6.1.4.1.17409.2.3.10.1.1.42 | Counter64 | read-only | OAM |
| C64 curStatsOutOAMOctets | 1.3.6.1.4.1.17409.2.3.10.1.1.43 | Counter64 | read-only | OAM |
| C64 curStatsOutCRCErrorPkts | 1.3.6.1.4.1.17409.2.3.10.1.1.44 | Counter64 | read-only | CRC |
| C64 curStatsOutDropEvents | 1.3.6.1.4.1.17409.2.3.10.1.1.45 | Counter64 | read-only | |
| C64 curStatsOutJabbers | 1.3.6.1.4.1.17409.2.3.10.1.1.46 | Counter64 | read-only | |
| C64 curStatsOutCollision | 1.3.6.1.4.1.17409.2.3.10.1.1.47 | Counter64 | read-only | |
| INT curStatsStatusAndAction | 1.3.6.1.4.1.17409.2.3.10.1.1.48 | INTEGER | read-write | clean(2) |
| stats15Table | 1.3.6.1.4.1.17409.2.3.10.2 | not-accessible | 15 minutes performance data | |
| stats15Entry | 1.3.6.1.4.1.17409.2.3.10.2.1 | not-accessible | ||
| EPO stats15DeviceIndex | 1.3.6.1.4.1.17409.2.3.10.2.1.1 | EponDeviceIndex | not-accessible | For OLT, set to corresponding device/slot/port For ONU, set to 0 |
| EPO stats15CardIndex | 1.3.6.1.4.1.17409.2.3.10.2.1.2 | EponCardIndex | not-accessible | For OLT, set to 0 For ONU, set to corresponding slot |
| EPO stats15PortIndex | 1.3.6.1.4.1.17409.2.3.10.2.1.3 | EponPortIndex | not-accessible | For OLT, set to 0 For ONU, set to corresponding port |
| EPO stats15Index | 1.3.6.1.4.1.17409.2.3.10.2.1.4 | EponStats15MinRecordType | not-accessible | |
| C64 stats15InOctets | 1.3.6.1.4.1.17409.2.3.10.2.1.5 | Counter64 | read-only | |
| C64 stats15InPkts | 1.3.6.1.4.1.17409.2.3.10.2.1.6 | Counter64 | read-only | |
| C64 stats15InBroadcastPkts | 1.3.6.1.4.1.17409.2.3.10.2.1.7 | Counter64 | read-only | |
| C64 stats15InMulticastPkts | 1.3.6.1.4.1.17409.2.3.10.2.1.8 | Counter64 | read-only | |
| C64 stats15InPkts64Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.9 | Counter64 | read-only | 64 |
| C64 stats15InPkts65to127Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.10 | Counter64 | read-only | 65127 |
| C64 stats15InPkts128to255Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.11 | Counter64 | read-only | 128255 |
| C64 stats15InPkts256to511Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.12 | Counter64 | read-only | 256511 |
| C64 stats15InPkts512to1023Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.13 | Counter64 | read-only | 5121023 |
| C64 stats15InPkts1024to1518Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.14 | Counter64 | read-only | 10241518 |
| C64 stats15InPkts1519to1522Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.15 | Counter64 | read-only | 15191522 |
| C64 stats15InUndersizePkts | 1.3.6.1.4.1.17409.2.3.10.2.1.16 | Counter64 | read-only | |
| C64 stats15InOversizePkts | 1.3.6.1.4.1.17409.2.3.10.2.1.17 | Counter64 | read-only | |
| C64 stats15InFragments | 1.3.6.1.4.1.17409.2.3.10.2.1.18 | Counter64 | read-only | |
| C64 stats15InMpcpFrames | 1.3.6.1.4.1.17409.2.3.10.2.1.19 | Counter64 | read-only | MPCP |
| C64 stats15InMpcpOctets | 1.3.6.1.4.1.17409.2.3.10.2.1.20 | Counter64 | read-only | MPCP |
| C64 stats15InOAMFrames | 1.3.6.1.4.1.17409.2.3.10.2.1.21 | Counter64 | read-only | OAM |
| C64 stats15InOAMOctets | 1.3.6.1.4.1.17409.2.3.10.2.1.22 | Counter64 | read-only | OAM |
| C64 stats15InCRCErrorPkts | 1.3.6.1.4.1.17409.2.3.10.2.1.23 | Counter64 | read-only | CRC |
| C64 stats15InDropEvents | 1.3.6.1.4.1.17409.2.3.10.2.1.24 | Counter64 | read-only | |
| C64 stats15InJabbers | 1.3.6.1.4.1.17409.2.3.10.2.1.25 | Counter64 | read-only | |
| C64 stats15InCollision | 1.3.6.1.4.1.17409.2.3.10.2.1.26 | Counter64 | read-only | |
| C64 stats15OutOctets | 1.3.6.1.4.1.17409.2.3.10.2.1.27 | Counter64 | read-only | |
| C64 stats15OutPkts | 1.3.6.1.4.1.17409.2.3.10.2.1.28 | Counter64 | read-only | |
| C64 stats15OutBroadcastPkts | 1.3.6.1.4.1.17409.2.3.10.2.1.29 | Counter64 | read-only | |
| C64 stats15OutMulticastPkts | 1.3.6.1.4.1.17409.2.3.10.2.1.30 | Counter64 | read-only | |
| C64 stats15OutPkts64Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.31 | Counter64 | read-only | 64 |
| C64 stats15OutPkts65to127Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.32 | Counter64 | read-only | 65127 |
| C64 stats15OutPkts128to255Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.33 | Counter64 | read-only | 128255 |
| C64 stats15OutPkts256to511Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.34 | Counter64 | read-only | 256511 |
| C64 stats15OutPkts512to1023Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.35 | Counter64 | read-only | 5121023 |
| C64 stats15OutPkts1024to1518Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.36 | Counter64 | read-only | 10241518 |
| C64 stats15OutPkts1519o1522Octets | 1.3.6.1.4.1.17409.2.3.10.2.1.37 | Counter64 | read-only | 15191522 |
| C64 stats15OutUndersizePkts | 1.3.6.1.4.1.17409.2.3.10.2.1.38 | Counter64 | read-only | |
| C64 stats15OutOversizePkts | 1.3.6.1.4.1.17409.2.3.10.2.1.39 | Counter64 | read-only | |
| C64 stats15OutFragments | 1.3.6.1.4.1.17409.2.3.10.2.1.40 | Counter64 | read-only | |
| C64 stats15OutMpcpFrames | 1.3.6.1.4.1.17409.2.3.10.2.1.41 | Counter64 | read-only | MPCP |
| C64 stats15OutMpcpOctets | 1.3.6.1.4.1.17409.2.3.10.2.1.42 | Counter64 | read-only | MPCP |
| C64 stats15OutOAMFrames | 1.3.6.1.4.1.17409.2.3.10.2.1.43 | Counter64 | read-only | OAM |
| C64 stats15OutOAMOctets | 1.3.6.1.4.1.17409.2.3.10.2.1.44 | Counter64 | read-only | OAM |
| C64 stats15OutCRCErrorPkts | 1.3.6.1.4.1.17409.2.3.10.2.1.45 | Counter64 | read-only | CRC |
| C64 stats15OutDropEvents | 1.3.6.1.4.1.17409.2.3.10.2.1.46 | Counter64 | read-only | |
| C64 stats15OutJabbers | 1.3.6.1.4.1.17409.2.3.10.2.1.47 | Counter64 | read-only | |
| C64 stats15OutCollision | 1.3.6.1.4.1.17409.2.3.10.2.1.48 | Counter64 | read-only | |
| INT stats15StatusAndAction | 1.3.6.1.4.1.17409.2.3.10.2.1.49 | INTEGER | read-write | clean(2) |
| T/F stats15ValidityTag | 1.3.6.1.4.1.17409.2.3.10.2.1.50 | TruthValue | read-only | Whether or not the current 15-min PM data is valid |
| C32 stats15ElapsedTime | 1.3.6.1.4.1.17409.2.3.10.2.1.51 | Counter32 | read-only | It is elapsed time, since start of this 15-min interval. It is only valid for current PM data. For history PM data, set to 0. |
| DAT stats15EndTime | 1.3.6.1.4.1.17409.2.3.10.2.1.52 | DateAndTime | read-only | It is time, when the PM history data is created. It is only valid for history PM data. |
| stats24Table | 1.3.6.1.4.1.17409.2.3.10.3 | not-accessible | 1-day performance data | |
| stats24Entry | 1.3.6.1.4.1.17409.2.3.10.3.1 | not-accessible | ||
| EPO stats24DeviceIndex | 1.3.6.1.4.1.17409.2.3.10.3.1.1 | EponDeviceIndex | not-accessible | For OLT, set to corresponding device/slot/port For ONU, set to 0 |
| EPO stats24CardIndex | 1.3.6.1.4.1.17409.2.3.10.3.1.2 | EponCardIndex | not-accessible | For OLT, set to 0 For ONU, set to corresponding slot |
| EPO stats24PortIndex | 1.3.6.1.4.1.17409.2.3.10.3.1.3 | EponPortIndex | not-accessible | For OLT, set to 0 For ONU, set to corresponding port |
| EPO stats24Index | 1.3.6.1.4.1.17409.2.3.10.3.1.4 | EponStats24HourRecordType | not-accessible | |
| C64 stats24InOctets | 1.3.6.1.4.1.17409.2.3.10.3.1.5 | Counter64 | read-only | |
| C64 stats24InPkts | 1.3.6.1.4.1.17409.2.3.10.3.1.6 | Counter64 | read-only | |
| C64 stats24InBroadcastPkts | 1.3.6.1.4.1.17409.2.3.10.3.1.7 | Counter64 | read-only | |
| C64 stats24InMulticastPkts | 1.3.6.1.4.1.17409.2.3.10.3.1.8 | Counter64 | read-only | |
| C64 stats24InPkts64Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.9 | Counter64 | read-only | 64 |
| C64 stats24InPkts65to127Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.10 | Counter64 | read-only | 65127 |
| C64 stats24InPkts128to255Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.11 | Counter64 | read-only | 128255 |
| C64 stats24InPkts256to511Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.12 | Counter64 | read-only | 256511 |
| C64 stats24InPkts512to1023Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.13 | Counter64 | read-only | 5121023 |
| C64 stats24InPkts1024to1518Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.14 | Counter64 | read-only | 10241518 |
| C64 stats24InPkts1519to1522Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.15 | Counter64 | read-only | 15191522 |
| C64 stats24InUndersizePkts | 1.3.6.1.4.1.17409.2.3.10.3.1.16 | Counter64 | read-only | |
| C64 stats24InOversizePkts | 1.3.6.1.4.1.17409.2.3.10.3.1.17 | Counter64 | read-only | |
| C64 stats24InFragments | 1.3.6.1.4.1.17409.2.3.10.3.1.18 | Counter64 | read-only | |
| C64 stats24InMpcpFrames | 1.3.6.1.4.1.17409.2.3.10.3.1.19 | Counter64 | read-only | MPCP |
| C64 stats24InMpcpOctets | 1.3.6.1.4.1.17409.2.3.10.3.1.20 | Counter64 | read-only | MPCP |
| C64 stats24InOAMFrames | 1.3.6.1.4.1.17409.2.3.10.3.1.21 | Counter64 | read-only | OAM |
| C64 stats24InOAMOctets | 1.3.6.1.4.1.17409.2.3.10.3.1.22 | Counter64 | read-only | OAM |
| C64 stats24InCRCErrorPkts | 1.3.6.1.4.1.17409.2.3.10.3.1.23 | Counter64 | read-only | CRC |
| C64 stats24InDropEvents | 1.3.6.1.4.1.17409.2.3.10.3.1.24 | Counter64 | read-only | |
| C64 stats24InJabbers | 1.3.6.1.4.1.17409.2.3.10.3.1.25 | Counter64 | read-only | |
| C64 stats24InCollision | 1.3.6.1.4.1.17409.2.3.10.3.1.26 | Counter64 | read-only | |
| C64 stats24OutOctets | 1.3.6.1.4.1.17409.2.3.10.3.1.27 | Counter64 | read-only | |
| C64 stats24OutPkts | 1.3.6.1.4.1.17409.2.3.10.3.1.28 | Counter64 | read-only | |
| C64 stats24OutBroadcastPkts | 1.3.6.1.4.1.17409.2.3.10.3.1.29 | Counter64 | read-only | |
| C64 stats24OutMulticastPkts | 1.3.6.1.4.1.17409.2.3.10.3.1.30 | Counter64 | read-only | |
| C64 stats24OutPkts64Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.31 | Counter64 | read-only | 64 |
| C64 stats24OutPkts65to127Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.32 | Counter64 | read-only | 65127 |
| C64 stats24OutPkts128to255Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.33 | Counter64 | read-only | 128255 |
| C64 stats24OutPkts256to511Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.34 | Counter64 | read-only | 256511 |
| C64 stats24OutPkts512to1023Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.35 | Counter64 | read-only | 5121023 |
| C64 stats24OutPkts1024to1518Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.36 | Counter64 | read-only | 10241518 |
| C64 stats24OutPkts1519o1522Octets | 1.3.6.1.4.1.17409.2.3.10.3.1.37 | Counter64 | read-only | 15191522 |
| C64 stats24OutUndersizePkts | 1.3.6.1.4.1.17409.2.3.10.3.1.38 | Counter64 | read-only | |
| C64 stats24OutOversizePkts | 1.3.6.1.4.1.17409.2.3.10.3.1.39 | Counter64 | read-only | |
| C64 stats24OutFragments | 1.3.6.1.4.1.17409.2.3.10.3.1.40 | Counter64 | read-only | |
| C64 stats24OutMpcpFrames | 1.3.6.1.4.1.17409.2.3.10.3.1.41 | Counter64 | read-only | MPCP |
| C64 stats24OutMpcpOctets | 1.3.6.1.4.1.17409.2.3.10.3.1.42 | Counter64 | read-only | MPCP |
| C64 stats24OutOAMFrames | 1.3.6.1.4.1.17409.2.3.10.3.1.43 | Counter64 | read-only | OAM |
| C64 stats24OutOAMOctets | 1.3.6.1.4.1.17409.2.3.10.3.1.44 | Counter64 | read-only | OAM |
| C64 stats24OutCRCErrorPkts | 1.3.6.1.4.1.17409.2.3.10.3.1.45 | Counter64 | read-only | CRC |
| C64 stats24OutDropEvents | 1.3.6.1.4.1.17409.2.3.10.3.1.46 | Counter64 | read-only | |
| C64 stats24OutJabbers | 1.3.6.1.4.1.17409.2.3.10.3.1.47 | Counter64 | read-only | |
| C64 stats24OutCollision | 1.3.6.1.4.1.17409.2.3.10.3.1.48 | Counter64 | read-only | |
| INT stats24StatusAndAction | 1.3.6.1.4.1.17409.2.3.10.3.1.49 | INTEGER | read-write | clear(2) |
| T/F stats24ValidityTag | 1.3.6.1.4.1.17409.2.3.10.3.1.50 | TruthValue | read-only | Whether or not the current 1-day PM data is valid |
| C32 stats24ElapsedTime | 1.3.6.1.4.1.17409.2.3.10.3.1.51 | Counter32 | read-only | It is elapsed time, since start of this 1-day interval. It is only valid for current PM data. For history PM data, set to 0. |
| DAT stats24EndTime | 1.3.6.1.4.1.17409.2.3.10.3.1.52 | DateAndTime | read-only | It is time, when the PM history data is created. It is only valid for history PM data. |
| perfStatsGlobalSet | 1.3.6.1.4.1.17409.2.3.10.4 | |||
| EPO perfStats15MinMaxRecord | 1.3.6.1.4.1.17409.2.3.10.4.1 | EponStats15MinRecordType | read-write | 15, 0 |
| EPO perfStats24HourMaxRecord | 1.3.6.1.4.1.17409.2.3.10.4.2 | EponStats24HourRecordType | read-write | 24 0 |
| perfStatsThresholdTable | 1.3.6.1.4.1.17409.2.3.10.5 | not-accessible | ||
| perfStatsThresholdEntry | 1.3.6.1.4.1.17409.2.3.10.5.1 | not-accessible | ||
| EPO perfStatsThresholdDeviceIndex | 1.3.6.1.4.1.17409.2.3.10.5.1.1 | EponDeviceIndex | not-accessible | curStatsDeviceIndex |
| EPO perfStatsThresholdCardIndex | 1.3.6.1.4.1.17409.2.3.10.5.1.2 | EponCardIndex | not-accessible | curStatsCardIndex |
| EPO perfStatsThresholdPortIndex | 1.3.6.1.4.1.17409.2.3.10.5.1.3 | EponPortIndex | not-accessible | curStatsPortIndex |
| EPO perfStatsThresholdTypeIndex | 1.3.6.1.4.1.17409.2.3.10.5.1.4 | EponStatsThresholdType | not-accessible | |
| C64 perfStatsThresholdUpper | 1.3.6.1.4.1.17409.2.3.10.5.1.5 | Counter64 | read-create | |
| C64 perfStatsThresholdLower | 1.3.6.1.4.1.17409.2.3.10.5.1.6 | Counter64 | read-create | |
| ROW perfStatsThresholdRowStatus | 1.3.6.1.4.1.17409.2.3.10.5.1.7 | RowStatus | read-create | |
| eoCTree | 1.3.6.1.4.1.17409.2.4 | |||
| orTree | 1.3.6.1.4.1.17409.2.5 | |||
| catvOrObjects | 1.3.6.1.4.1.17409.2.5.1 | |||
| onuCatvOrConfigTable | 1.3.6.1.4.1.17409.2.5.1.1 | not-accessible | A list of onuCatvOrConfigTable entries. | |
| onuCatvOrConfigEntry | 1.3.6.1.4.1.17409.2.5.1.1.1 | not-accessible | The onuCatvOrConfigEntry Information | |
| EPO onuCatvOrConfigDeviceIndex | 1.3.6.1.4.1.17409.2.5.1.1.1.1 | EponDeviceIndex | not-accessible | onu Catv Opitcal receiver config Index |
| INT onuCatvOrConfigSwitch | 1.3.6.1.4.1.17409.2.5.1.1.1.2 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigGainControlType | 1.3.6.1.4.1.17409.2.5.1.1.1.3 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigAGCUpValue | 1.3.6.1.4.1.17409.2.5.1.1.1.4 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigAGCRange | 1.3.6.1.4.1.17409.2.5.1.1.1.5 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigMGCTxAttenuation | 1.3.6.1.4.1.17409.2.5.1.1.1.6 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigInputLO | 1.3.6.1.4.1.17409.2.5.1.1.1.7 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigInputHI | 1.3.6.1.4.1.17409.2.5.1.1.1.8 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigOutputLO | 1.3.6.1.4.1.17409.2.5.1.1.1.9 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigOutputHI | 1.3.6.1.4.1.17409.2.5.1.1.1.10 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigVoltageHI | 1.3.6.1.4.1.17409.2.5.1.1.1.11 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigVoltageLO | 1.3.6.1.4.1.17409.2.5.1.1.1.12 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigTemperatureHI | 1.3.6.1.4.1.17409.2.5.1.1.1.13 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| INT onuCatvOrConfigTemperatureLO | 1.3.6.1.4.1.17409.2.5.1.1.1.14 | INTEGER | read-write | onu Catv Opitcal receiver switch. |
| onuCatvOrInfoTable | 1.3.6.1.4.1.17409.2.5.1.2 | not-accessible | A list of onuCatvOrInfoTable entries. | |
| onuCatvOrInfoEntry | 1.3.6.1.4.1.17409.2.5.1.2.1 | not-accessible | The onuCatvOrConfigEntry Information | |
| EPO onuCatvOrInfoDeviceIndex | 1.3.6.1.4.1.17409.2.5.1.2.1.1 | EponDeviceIndex | not-accessible | onu Catv Opitcal receiver information Index |
| INT onuCatvOrInfoRxPower | 1.3.6.1.4.1.17409.2.5.1.2.1.2 | INTEGER | read-only | onu Catv Opitcal receiver information rx-power. |
| INT onuCatvOrInfoRfOutVoltage | 1.3.6.1.4.1.17409.2.5.1.2.1.3 | INTEGER | read-only | onu Catv Opitcal receiver information rf out voltage. |
| INT onuCatvOrInfoVoltage | 1.3.6.1.4.1.17409.2.5.1.2.1.4 | INTEGER | read-only | onu Catv Opitcal receiver information voltage. |
| INT onuCatvOrInfoTemperature | 1.3.6.1.4.1.17409.2.5.1.2.1.5 | INTEGER | read-only | onu Catv Opitcal receiver information temperat. |
| oTTree | 1.3.6.1.4.1.17409.2.6 | |||
| cityNetworkOpticalTransmissionCommonQuery | 1.3.6.1.4.1.17409.2.6.1 | |||
| cityNetworkOpticalTransmissionCommonTable | 1.3.6.1.4.1.17409.2.6.1.1 | not-accessible | ||
| commonEponDeviceEntry | 1.3.6.1.4.1.17409.2.6.1.1.1 | not-accessible | The commonEponDeviceEntry Information | |
| INT commonEponDeviceIndex | 1.3.6.1.4.1.17409.2.6.1.1.1.1 | INTEGER | not-accessible | CityNetworkOpticalTransmissionCommonQueryTable Index |
| STR commonEponDeviceType | 1.3.6.1.4.1.17409.2.6.1.1.1.2 | DisplayString | read-only | |
| STR commonEponDeviceName | 1.3.6.1.4.1.17409.2.6.1.1.1.3 | DisplayString | read-only | |
| STR commonEponVendorName | 1.3.6.1.4.1.17409.2.6.1.1.1.4 | DisplayString | read-only | |
| STR commonEponModelNumber | 1.3.6.1.4.1.17409.2.6.1.1.1.5 | DisplayString | read-only | |
| STR commonEponSerialNumber | 1.3.6.1.4.1.17409.2.6.1.1.1.6 | DisplayString | read-only | |
| IP commonEponIpAddress | 1.3.6.1.4.1.17409.2.6.1.1.1.7 | IpAddress | read-write | IP |
| INT commonEponMacAddress | 1.3.6.1.4.1.17409.2.6.1.1.1.8 | INTEGER | read-only | MAC |
| STR commonEponDeviceMFD | 1.3.6.1.4.1.17409.2.6.1.1.1.10 | DisplayString | read-only | |
| INT commonEponDeviceInternalTemperature | 1.3.6.1.4.1.17409.2.6.1.1.1.12 | INTEGER | read-only | |
| INT commonEponInputRFLevel | 1.3.6.1.4.1.17409.2.6.1.1.1.13 | INTEGER | read-only | ,dBuV/ch |
| INT commonEponOpicalInputPower | 1.3.6.1.4.1.17409.2.6.1.1.1.14 | INTEGER | read-only | ,0.1dBm |
| INT commonEponOutputOpticalPower | 1.3.6.1.4.1.17409.2.6.1.1.1.15 | INTEGER | read-only | ,0.1dBm |
| INT commonEponPowerVoltage | 1.3.6.1.4.1.17409.2.6.1.1.1.16 | INTEGER | read-only | 0.1V |
| INT commonEponPowerCurrent | 1.3.6.1.4.1.17409.2.6.1.1.1.17 | INTEGER | read-only | 0.01A |
RFC description
Management Information Base for EPON (Ethernet Passive Optical Network) fiber-to-the-x systems. Defines objects for managing ONU/ONT devices, optical power, signal quality, and EPON protocol parameters.
Start monitoring NSCRTV EPON OLT/ONU FTTx access network equipment (shared alarm conventions) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.