NRC-MultiGate :: hub1ReconnectOnTransmission

MIB Reference — IPNetwork Monitor · Updated September 12, 2026

All MIBsNRC-MultiGatehub1ReconnectOnTransmission

hub1ReconnectOnTransmission

Module: NRC-MultiGate

OID (symbolic): NRC-MultiGate::hub1ReconnectOnTransmission

OID (numeric): 1.3.6.1.4.1.315.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The value 'enabled' indicates that the HUB will reconnect an auto partitioned port if the HUB receives a packet from a partitioned port.

The value 'disabled' indicates that the HUB will reconnect a partitioned port if there is any traffic to or from the port.

What is hub1ReconnectOnTransmission?

Controls how an auto-partitioned port gets reconnected: enabled(1) reconnects it only when the hub actually receives a packet from that partitioned port, while disabled(2) reconnects it on any traffic to or from the port.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.315.1.2
snmpwalk -v2c -c public <target> NRC-MultiGate::hub1ReconnectOnTransmission

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.315.1.2.1
snmpget -v2c -c public <target> NRC-MultiGate::hub1ReconnectOnTransmission.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.315.1.2.1 i <value>

Start monitoring NRC MultiGate multiport gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NRC-MultiGate::hub1ReconnectOnTransmission OID value, configure state conditions and alerts, and monitor any NRC MultiGate multiport gateway (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.315nrcNRC-HUB1-MIB
1.3.6.1.4.1.315.1hub1NRC-HUB1-MIB
Numeric OIDNameModule
1.3.6.1.4.1.315.1.2hub1ReconnectOnTransmissionNRC-MultiGate