All MIBs › NRC-MultiGate › hub1CarrierRecoverTime
hub1CarrierRecoverTime
Module: NRC-MultiGate
OID (symbolic): NRC-MultiGate::hub1CarrierRecoverTime
OID (numeric): 1.3.6.1.4.1.315.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Time to recover carrier. A value of 'short' will use 3 bit times (IEEE 802.3 specification). A value of 'long' will use 5 bit times.
What is hub1CarrierRecoverTime?
Sets how long the hub waits to recover carrier after a collision: short(3) uses 3 bit times per the IEEE 802.3 spec, while long(5) uses 5 bit times.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.315.1.6 snmpwalk -v2c -c public <target> NRC-MultiGate::hub1CarrierRecoverTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.315.1.6.1 snmpget -v2c -c public <target> NRC-MultiGate::hub1CarrierRecoverTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.315.1.6.1 i <value>
Start monitoring NRC MultiGate multiport gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NRC-MultiGate::hub1CarrierRecoverTime OID value, configure state conditions and alerts, and monitor any NRC MultiGate multiport gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.315 | nrc | NRC-HUB1-MIB |
| 1.3.6.1.4.1.315.1 | hub1 | NRC-HUB1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.315.1.6 | hub1CarrierRecoverTime | NRC-MultiGate |