All MIBs › NRC-MultiGate › hub1AutoPartition
hub1AutoPartition
Module: NRC-MultiGate
OID (symbolic): NRC-MultiGate::hub1AutoPartition
OID (numeric): 1.3.6.1.4.1.315.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value 'enabled' indicates that the HUB should auto partition ports.
The value 'disabled' will disable this feature.
What is hub1AutoPartition?
Enables or disables the NRC HUB 1's auto-partition feature, which automatically isolates a misbehaving port from the shared segment; disabling it means faulty ports stay connected even if they'd otherwise be auto-partitioned.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.315.1.1 snmpwalk -v2c -c public <target> NRC-MultiGate::hub1AutoPartition
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.315.1.1.1 snmpget -v2c -c public <target> NRC-MultiGate::hub1AutoPartition.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.315.1.1.1 i <value>
Start monitoring NRC MultiGate multiport gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NRC-MultiGate::hub1AutoPartition OID value, configure state conditions and alerts, and monitor any NRC MultiGate multiport gateway (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.315 | nrc | NRC-HUB1-MIB |
| 1.3.6.1.4.1.315.1 | hub1 | NRC-HUB1-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.315.1.1 | hub1AutoPartition | NRC-MultiGate |