All MIBs › NRC-HUB1-MIB › hub1Reset
hub1Reset
Module: NRC-HUB1-MIB
OID (symbolic): NRC-HUB1-MIB::hub1Reset
OID (numeric): 1.3.6.1.4.1.315.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
Setting this object to 'reset' will cause the Hub1 to perform a hardware reset within approximately 5 seconds.
Setting this object to 'no-reset will have no effect. The value 'no-reset will be returned whenever this object is retrieved.
The primary purpose for including this variable in the Hub1 MIB is to allow SNMP managers to modify the operational mode of the Hub1. Changing the variable hub1BridgingMode has no effect on the Hub until the Hub is reset.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.315.1.13 snmpwalk -v2c -c public <target> NRC-HUB1-MIB::hub1Reset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.315.1.13.1 snmpget -v2c -c public <target> NRC-HUB1-MIB::hub1Reset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.315.1.13.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.315 | nrc | NRC-HUB1-MIB |
| 1.3.6.1.4.1.315.1 | hub1 | NRC-HUB1-MIB |
| 1.3.6.1.4.1.315.1.13 | hub1Reset | NRC-HUB1-MIB |