All MIBs › NRC-HUB1-MIB › hub1AutoPartition
hub1AutoPartition
Module: NRC-HUB1-MIB
OID (symbolic): NRC-HUB1-MIB::hub1AutoPartition
OID (numeric): 1.3.6.1.4.1.315.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The value 'enabled' indicates that the HUB should auto partition ports.
The value 'disabled' will disable this feature.
What is hub1AutoPartition?
Enables or disables the hub's automatic port partitioning feature, which isolates a misbehaving port from the shared Ethernet segment when its collision or error rate crosses configured limits.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.315.1.1 snmpwalk -v2c -c public <target> NRC-HUB1-MIB::hub1AutoPartition
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.315.1.1.1 snmpget -v2c -c public <target> NRC-HUB1-MIB::hub1AutoPartition.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.315.1.1.1 i <value>
Start monitoring NRC Hub1-series Ethernet hub/repeater (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NRC-HUB1-MIB::hub1AutoPartition OID value, configure state conditions and alerts, and monitor any NRC Hub1-series Ethernet hub/repeater (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.315 | nrc | NRC-HUB1-MIB |
| 1.3.6.1.4.1.315.1 | hub1 | NRC-HUB1-MIB |
| 1.3.6.1.4.1.315.1.1 | hub1AutoPartition | NRC-HUB1-MIB |