All MIBs › NNCEXTNEINVENTORY-MIB › nncNEInvAssemblyNextActiveSwBank
nncNEInvAssemblyNextActiveSwBank
Module: NNCEXTNEINVENTORY-MIB
OID (symbolic): NNCEXTNEINVENTORY-MIB::nncNEInvAssemblyNextActiveSwBank
OID (numeric): 1.3.6.1.4.1.123.3.69.1.1.1.9
Node type: OBJECT-TYPE
Type: NncSwBank
Access: read-only
Description: Indicates the software bank which will be active when the card resets. The default value of NotApplicable(0) indicates the entity without software banks. On the other hand, if there is a failure to obtain this information, Unknown(257) is returned. For example, if a card is configured but not installed, Unknown(257) is returned.
What is nncNEInvAssemblyNextActiveSwBank?
This read-only value reports which software bank will become active the next time this assembly resets; a default value of NotApplicable(0) means the entity has no software banks, while Unknown(257) is returned if this information can't be obtained, such as for a configured-but-not-installed card. Admins use it to confirm which software image a card will boot into on its next reset, which is essential to verify before intentionally resetting a card after a software upgrade. For example, after staging a new software load into a spare bank, an admin would check this object to confirm the next-active bank has been correctly switched to that new load before triggering the actual reset.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.123.3.69.1.1.1.9 snmpwalk -v2c -c public <target> NNCEXTNEINVENTORY-MIB::nncNEInvAssemblyNextActiveSwBank
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.123.3.69.1.1.1.9.1 snmpget -v2c -c public <target> NNCEXTNEINVENTORY-MIB::nncNEInvAssemblyNextActiveSwBank.1
Start monitoring Newbridge Networks network element (switch/access node, inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NNCEXTNEINVENTORY-MIB::nncNEInvAssemblyNextActiveSwBank OID value, configure state conditions and alerts, and monitor any Newbridge Networks network element (switch/access node, inventory) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.123 | newbridge | NNCGNI0001-SMI |
| 1.3.6.1.4.1.123.3 | nncExtensions | NNCGNI0001-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.123.3.69 | nncExtNEInventory | NNCEXTNEINVENTORY-MIB |
| 1.3.6.1.4.1.123.3.69.1 | nncExtNEInventoryObjects | NNCEXTNEINVENTORY-MIB |
| 1.3.6.1.4.1.123.3.69.1.1 | nncNEInventoryTable | NNCEXTNEINVENTORY-MIB |
| 1.3.6.1.4.1.123.3.69.1.1.1 | nncNEInventoryTableEntry | NNCEXTNEINVENTORY-MIB |
| 1.3.6.1.4.1.123.3.69.1.1.1.9 | nncNEInvAssemblyNextActiveSwBank | NNCEXTNEINVENTORY-MIB |