All MIBs › NMS520-MIB › nms520DiagNetworkDelay
nms520DiagNetworkDelay
Module: NMS520-MIB
OID (symbolic): NMS520-MIB::nms520DiagNetworkDelay
OID (numeric): 1.3.6.1.4.1.498.8.2.7.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: To initiate a Network Delay test SET this object and specifiy runDelayTest. Both the remote (nms520) and master (sc5520) units will go into a test to measure network delay. Emun 3 is write only. The only valid responses to a READ are delayTestOn(2) or delatTestOff(1). This test will terminate after 10 seconds. Reading test results via the nms520DelayTime object while the test is running will cause the test to terminate prematurely and render the results invalid. Test results should be read only after the test is completed and are available from the master (sc5520) unit. The current Test Status can be obtained by reading the sc5520DiagTestStatus object on the master unit, reading test status on the remote unit may interfere with the test and cause errors. This test can not be terminated early once it is started.
What is nms520DiagNetworkDelay?
Starts a network delay measurement test on both the remote and master units when set to runDelayTest(3); the roughly 10-second test cannot be stopped early once started, and its result is read via nms520DiagTimeDelay on the master unit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.498.8.2.7.1.6 snmpwalk -v2c -c public <target> NMS520-MIB::nms520DiagNetworkDelay
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.498.8.2.7.1.6.1 snmpget -v2c -c public <target> NMS520-MIB::nms520DiagNetworkDelay.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.498.8.2.7.1.6.1 i <value>
Start monitoring General DataComm (GDC) NMS520 DDS DSU/CSU unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NMS520-MIB::nms520DiagNetworkDelay OID value, configure state conditions and alerts, and monitor any General DataComm (GDC) NMS520 DDS DSU/CSU unit from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.498 | gdc | DMA200-MIB |
| 1.3.6.1.4.1.498.8 | dsu | DDS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.498.8.2 | nms520 | NMS520-MIB |
| 1.3.6.1.4.1.498.8.2.7 | nms520DiagExcTable | NMS520-MIB |
| 1.3.6.1.4.1.498.8.2.7.1 | nms520DiagExcEntry | NMS520-MIB |
| 1.3.6.1.4.1.498.8.2.7.1.6 | nms520DiagNetworkDelay | NMS520-MIB |