NEWBRIDGE-MIB :: nnciT1SlotLoopLength

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NEWBRIDGE-MIB › nnciT1SlotLoopLength

nnciT1SlotLoopLength

Module: NEWBRIDGE-MIB

OID (symbolic): NEWBRIDGE-MIB::nnciT1SlotLoopLength

OID (numeric): 1.3.6.1.4.1.123.2.22.1.1.8

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object is used to control the pre-equalization applied to signal before transmission.

What is nnciT1SlotLoopLength?

Sets the cable-length category (short, medium, long) used to control the transmit pre-equalization applied to the T1 signal before it goes out on the line.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.123.2.22.1.1.8
snmpwalk -v2c -c public <target> NEWBRIDGE-MIB::nnciT1SlotLoopLength

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.123.2.22.1.1.8.1
snmpget -v2c -c public <target> NEWBRIDGE-MIB::nnciT1SlotLoopLength.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.123.2.22.1.1.8.1 i <value>

Start monitoring Newbridge Networks ATM/WAN switch (MainStreet/Vivid product families) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NEWBRIDGE-MIB::nnciT1SlotLoopLength OID value, configure state conditions and alerts, and monitor any Newbridge Networks ATM/WAN switch (MainStreet/Vivid product families) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.123newbridgeNNCGNI0001-SMI
1.3.6.1.4.1.123.2nncInterimMibNNCGNI0001-SMI
Numeric OIDNameModule
1.3.6.1.4.1.123.2.22nnciT1SlotNEWBRIDGE-MIB
1.3.6.1.4.1.123.2.22.1nnciT1SlotTableNEWBRIDGE-MIB
1.3.6.1.4.1.123.2.22.1.1nnciT1SlotTableEntryNEWBRIDGE-MIB
1.3.6.1.4.1.123.2.22.1.1.8nnciT1SlotLoopLengthNEWBRIDGE-MIB