NETSCREEN-OSPF-MIB :: nsOspfNbrOptions

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › NETSCREEN-OSPF-MIB › nsOspfNbrOptions

nsOspfNbrOptions

Module: NETSCREEN-OSPF-MIB

OID (symbolic): NETSCREEN-OSPF-MIB::nsOspfNbrOptions

OID (numeric): 1.3.6.1.4.1.3224.18.2.10.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: A Bit Mask corresponding to the neighbor's op- tions field.

Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric.

Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area.

Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF.

Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise-

ments at NSSA borders.

What is nsOspfNbrOptions?

A bitmask of capabilities this neighbor advertised in its Hello/DD packets -- e.g. bit 0 for non-zero-TOS support, bit 1 for accepting external routes (non-stub area), bit 2 for multicast OSPF, bit 3 for NSSA support.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3224.18.2.10.1.4
snmpwalk -v2c -c public <target> NETSCREEN-OSPF-MIB::nsOspfNbrOptions

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3224.18.2.10.1.4.1
snmpget -v2c -c public <target> NETSCREEN-OSPF-MIB::nsOspfNbrOptions.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> nsOspfNbrOptions.1

Start monitoring Juniper NetScreen firewall/security appliance (OSPFv2) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETSCREEN-OSPF-MIB::nsOspfNbrOptions OID value, configure state conditions and alerts, and monitor any Juniper NetScreen firewall/security appliance (OSPFv2) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3224netscreenNETSCREEN-SMI
1.3.6.1.4.1.3224.18netscreenVRNETSCREEN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3224.18.2nsOspfNETSCREEN-OSPF-MIB
1.3.6.1.4.1.3224.18.2.10nsOspfNbrTableNETSCREEN-OSPF-MIB
1.3.6.1.4.1.3224.18.2.10.1nsOspfNbrEntryNETSCREEN-OSPF-MIB
1.3.6.1.4.1.3224.18.2.10.1.4nsOspfNbrOptionsNETSCREEN-OSPF-MIB