NETI-ITS-MIB :: itsIfSdiReference

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › NETI-ITS-MIB › itsIfSdiReference

itsIfSdiReference

Module: NETI-ITS-MIB

OID (symbolic): NETI-ITS-MIB::itsIfSdiReference

OID (numeric): 1.3.6.1.4.1.2928.6.2.16.1.1.7.1.4

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Selects the source interface to use as timing reference for output alignment. The source can be any interface on the same board. The value is the relative interface number on the board, where the first interface on the board is number 1, the second is number 2 and so on. A value of `0' (zero) indicates the node sync. The default is itself, which equals to through timing. As through timing is not available on JPEG 2000 decoder, selection of the interface itself means node sync.

This object is applicable only if the interface supports reference locking, i.e. if the `ref' bit is set in itsIfCapabilities.

What is itsIfSdiReference?

Selects which interface on the same board is used as the timing reference for this SDI interface's output alignment; a value of 0 means node sync, and selecting the interface itself means through timing, or node sync on a JPEG 2000 decoder where through timing isn't available. Applicable only when reference locking is supported.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2928.6.2.16.1.1.7.1.4
snmpwalk -v2c -c public <target> NETI-ITS-MIB::itsIfSdiReference

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2928.6.2.16.1.1.7.1.4.1
snmpget -v2c -c public <target> NETI-ITS-MIB::itsIfSdiReference.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2928.6.2.16.1.1.7.1.4.1 i <value>

Start monitoring Net Insight Nimbra DTM transport network node (Isochronous Transport Services) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETI-ITS-MIB::itsIfSdiReference OID value, configure state conditions and alerts, and monitor any Net Insight Nimbra DTM transport network node (Isochronous Transport Services) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2928netinsightNETI-COMMON-MIB
1.3.6.1.4.1.2928.6netiExperimentalNETI-COMMON-MIB
1.3.6.1.4.1.2928.6.2netiExperimentalGenericNETI-COMMON-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2928.6.2.16netiItsMIBNETI-ITS-MIB
1.3.6.1.4.1.2928.6.2.16.1itsObjectsNETI-ITS-MIB
1.3.6.1.4.1.2928.6.2.16.1.1itsIfGroupNETI-ITS-MIB
1.3.6.1.4.1.2928.6.2.16.1.1.7itsIfSdiTableNETI-ITS-MIB
1.3.6.1.4.1.2928.6.2.16.1.1.7.1itsIfSdiEntryNETI-ITS-MIB
1.3.6.1.4.1.2928.6.2.16.1.1.7.1.4itsIfSdiReferenceNETI-ITS-MIB