All MIBs › NETGEAR-VPC-MIB › agentVpcDomainSystemMac
agentVpcDomainSystemMac
Module: NETGEAR-VPC-MIB
OID (symbolic): NETGEAR-VPC-MIB::agentVpcDomainSystemMac
OID (numeric): 1.3.6.1.4.1.4526.10.200.1.9.1.6
Node type: OBJECT-TYPE
Type: MacAddress
Access: read-write
Description: To configure the MAC address for the VPC domain. This mac-address
is used in the LACP PDUs and STP BPDUs
that are sent out on VPC member ports. For the VPC domain to use
the manually configured VPC MAC address, it should be manually
configured on both the VPC peers and should be the same. If VPC
is configured on only one of the VPC peers or is configured
different on VPC peers, auto-generated MAC address is used.
The specified MAC address should be a unicast MAC address in
What is agentVpcDomainSystemMac?
Configures a shared MAC address for this VPC domain, used in the LACP PDUs and STP BPDUs sent out on VPC member ports; it must be configured identically on both VPC peers (and differ from either peer's own MAC) to take effect, and only applies once VPC is re-enabled after the change, otherwise an auto-generated MAC is used.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.10.200.1.9.1.6 snmpwalk -v2c -c public <target> NETGEAR-VPC-MIB::agentVpcDomainSystemMac
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.10.200.1.9.1.6.1 snmpget -v2c -c public <target> NETGEAR-VPC-MIB::agentVpcDomainSystemMac.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.10.200.1.9.1.6.1 s <value>
Start monitoring Netgear managed switch/switch stack (Virtual Port Channel) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-VPC-MIB::agentVpcDomainSystemMac OID value, configure state conditions and alerts, and monitor any Netgear managed switch/switch stack (Virtual Port Channel) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.10 | ng7000Switch | NETGEAR-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.10.200 | fastPathVpc | NETGEAR-VPC-MIB |
| 1.3.6.1.4.1.4526.10.200.1 | agentVpcConfigGroup | NETGEAR-VPC-MIB |
| 1.3.6.1.4.1.4526.10.200.1.9 | agentVpcDomainConfigTable | NETGEAR-VPC-MIB |
| 1.3.6.1.4.1.4526.10.200.1.9.1 | agentVpcDomainConfigEntry | NETGEAR-VPC-MIB |
| 1.3.6.1.4.1.4526.10.200.1.9.1.6 | agentVpcDomainSystemMac | NETGEAR-VPC-MIB |