All MIBs › NETGEAR-VPC-MIB › agentVpcDomainPeerDetectionMode
agentVpcDomainPeerDetectionMode
Module: NETGEAR-VPC-MIB
OID (symbolic): NETGEAR-VPC-MIB::agentVpcDomainPeerDetectionMode
OID (numeric): 1.3.6.1.4.1.4526.10.200.1.9.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: To start/stop the dual control plane detection protocol (DCPDP) on the VPC switch. The following options are supported:
enable - Enable the DCPDP on VPC switch disable - Disable the DCPDP on VPC switch
Note: The peer VPC switch's IP address has to be configured for the DCPDP to start on an VPC switch.
What is agentVpcDomainPeerDetectionMode?
Starts or stops the dual control plane detection protocol (DCPDP) for this VPC domain; requires the domain's peer IP address to already be configured for detection to actually start.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.10.200.1.9.1.5 snmpwalk -v2c -c public <target> NETGEAR-VPC-MIB::agentVpcDomainPeerDetectionMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.10.200.1.9.1.5.1 snmpget -v2c -c public <target> NETGEAR-VPC-MIB::agentVpcDomainPeerDetectionMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.10.200.1.9.1.5.1 i <value>
Start monitoring Netgear managed switch/switch stack (Virtual Port Channel) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-VPC-MIB::agentVpcDomainPeerDetectionMode OID value, configure state conditions and alerts, and monitor any Netgear managed switch/switch stack (Virtual Port Channel) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.10 | ng7000Switch | NETGEAR-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.10.200 | fastPathVpc | NETGEAR-VPC-MIB |
| 1.3.6.1.4.1.4526.10.200.1 | agentVpcConfigGroup | NETGEAR-VPC-MIB |
| 1.3.6.1.4.1.4526.10.200.1.9 | agentVpcDomainConfigTable | NETGEAR-VPC-MIB |
| 1.3.6.1.4.1.4526.10.200.1.9.1 | agentVpcDomainConfigEntry | NETGEAR-VPC-MIB |
| 1.3.6.1.4.1.4526.10.200.1.9.1.5 | agentVpcDomainPeerDetectionMode | NETGEAR-VPC-MIB |