All MIBs › NETGEAR-UDLD-MIB › agentUdldInterfaceAggresiveMode
agentUdldInterfaceAggresiveMode
Module: NETGEAR-UDLD-MIB
OID (symbolic): NETGEAR-UDLD-MIB::agentUdldInterfaceAggresiveMode
OID (numeric): 1.3.6.1.4.1.4526.10.54.1.2.1.1.3
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Indicates the mode of UDLDP feature on the interface. TRUE -- Aggressive mode is enabled on the interface.
FALSE -- Aggressive mode is disabled on the interface.
What is agentUdldInterfaceAggresiveMode?
This read-write TruthValue object turns UDLD's aggressive mode on or off for a specific interface, with TRUE enabling it and FALSE disabling it. Admins enable aggressive mode so that once a previously bidirectional link stops sending hellos, UDLD proactively re-checks and shuts the port down instead of leaving it up, closing a gap that standard UDLD can miss. For example, setting agentUdldInterfaceAggresiveMode to TRUE on a critical fiber uplink ensures the port is disabled quickly if it stops responding, rather than silently blackholing traffic.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.10.54.1.2.1.1.3 snmpwalk -v2c -c public <target> NETGEAR-UDLD-MIB::agentUdldInterfaceAggresiveMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.10.54.1.2.1.1.3.1 snmpget -v2c -c public <target> NETGEAR-UDLD-MIB::agentUdldInterfaceAggresiveMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.10.54.1.2.1.1.3.1 s <value>
Start monitoring Netgear FastPath-based managed switch (UniDirectional Link Detection) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-UDLD-MIB::agentUdldInterfaceAggresiveMode OID value, configure state conditions and alerts, and monitor any Netgear FastPath-based managed switch (UniDirectional Link Detection) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.10 | ng7000managedswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.10.54 | fastPathUdld | NETGEAR-UDLD-MIB |
| 1.3.6.1.4.1.4526.10.54.1 | agentUdldMIBObjects | NETGEAR-UDLD-MIB |
| 1.3.6.1.4.1.4526.10.54.1.2 | agentUdldInterface | NETGEAR-UDLD-MIB |
| 1.3.6.1.4.1.4526.10.54.1.2.1 | agentUdldInterfaceTable | NETGEAR-UDLD-MIB |
| 1.3.6.1.4.1.4526.10.54.1.2.1.1 | agentUdldInterfaceEntry | NETGEAR-UDLD-MIB |
| 1.3.6.1.4.1.4526.10.54.1.2.1.1.3 | agentUdldInterfaceAggresiveMode | NETGEAR-UDLD-MIB |