NETGEAR-SWITCHING-MIB :: agentTransferUploadServerAddress

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › NETGEAR-SWITCHING-MIB › agentTransferUploadServerAddress

agentTransferUploadServerAddress

Module: NETGEAR-SWITCHING-MIB

OID (symbolic): NETGEAR-SWITCHING-MIB::agentTransferUploadServerAddress

OID (numeric): 1.3.6.1.4.1.4526.11.1.2.9.1.9

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-write

Description: Transfer upload serverip configures the IP address of the server where the file is to be uploaded to.It is valid only when the Transfer Mode is TFTP, SFTP or SCP. The type of this address is determined by the value of the agentTransferUploadServerAddressType object. The values for agentTransferUploadServerAddressType and agentTransferUploadServerAddress must be consistent.

What is agentTransferUploadServerAddress?

This InetAddress is the destination server's IP address for a configuration/firmware upload, valid only when the transfer mode is TFTP, SFTP, or SCP, and it must match the address family declared in agentTransferUploadServerAddressType. An admin sets it to point uploads at, e.g., a central TFTP archive server.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.9.1.9
snmpwalk -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentTransferUploadServerAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.9.1.9.1
snmpget -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentTransferUploadServerAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.1.2.9.1.9.1 s <value>

Start monitoring Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-SWITCHING-MIB::agentTransferUploadServerAddress OID value, configure state conditions and alerts, and monitor any Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
1.3.6.1.4.1.4526.11ng700smartswitchNetgear-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.11.1agentSwitchingNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2agentConfigGroupNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2.9agentTransferConfigGroupNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2.9.1agentTransferUploadGroupNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2.9.1.9agentTransferUploadServerAddressNETGEAR-SWITCHING-MIB