NETGEAR-SWITCHING-MIB :: agentTransferDownloadServerAddress

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › NETGEAR-SWITCHING-MIB › agentTransferDownloadServerAddress

agentTransferDownloadServerAddress

Module: NETGEAR-SWITCHING-MIB

OID (symbolic): NETGEAR-SWITCHING-MIB::agentTransferDownloadServerAddress

OID (numeric): 1.3.6.1.4.1.4526.11.1.2.9.2.9

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-write

Description: Transfer download serverip configures the IP address of the server where the file is to be downloaded from.It is valid only when the Transfer Mode is TFTP, SFTP, or SCP. The type of this address is determined by the value of the agentTransferDownloadServerAddressType object. The values for agentTransferDownloadServerAddressType and agentTransferDownloadServerAddress must be consistent.

What is agentTransferDownloadServerAddress?

This InetAddress is the source server's IP address a configuration/firmware file will be downloaded from, valid only when the transfer mode is TFTP, SFTP, or SCP, and it must match the address family declared in agentTransferDownloadServerAddressType. An admin sets it to point at, e.g., a TFTP server hosting the new firmware image.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.9.2.9
snmpwalk -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentTransferDownloadServerAddress

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.9.2.9.1
snmpget -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentTransferDownloadServerAddress.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.1.2.9.2.9.1 s <value>

Start monitoring Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-SWITCHING-MIB::agentTransferDownloadServerAddress OID value, configure state conditions and alerts, and monitor any Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
1.3.6.1.4.1.4526.11ng700smartswitchNetgear-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.11.1agentSwitchingNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2agentConfigGroupNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2.9agentTransferConfigGroupNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2.9.2agentTransferDownloadGroupNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2.9.2.9agentTransferDownloadServerAddressNETGEAR-SWITCHING-MIB