All MIBs › NETGEAR-SWITCHING-MIB › agentSwitchUnicastControlMode
agentSwitchUnicastControlMode
Module: NETGEAR-SWITCHING-MIB
OID (symbolic): NETGEAR-SWITCHING-MIB::agentSwitchUnicastControlMode
OID (numeric): 1.3.6.1.4.1.4526.11.1.2.8.12.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unknown unicast traffic on any Ethernet port exceeds the configured threshold, the switch blocks (discards) the unknown unicast traffic.
What is agentSwitchUnicastControlMode?
This enable(1)/disable(2) flag (default disable) turns on storm control for unknown unicast traffic: once enabled, a port whose unknown-unicast traffic exceeds its threshold has that traffic discarded. This guards against flooding caused by asymmetric routing or MAC table misses rather than true broadcast/multicast storms.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.8.12.8 snmpwalk -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentSwitchUnicastControlMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.8.12.8.1 snmpget -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentSwitchUnicastControlMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.1.2.8.12.8.1 i <value>
Start monitoring Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-SWITCHING-MIB::agentSwitchUnicastControlMode OID value, configure state conditions and alerts, and monitor any Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.11 | ng700smartswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.11.1 | agentSwitching | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2 | agentConfigGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8 | agentSwitchConfigGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8.12 | agentSwitchStormControlGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8.12.8 | agentSwitchUnicastControlMode | NETGEAR-SWITCHING-MIB |