All MIBs › NETGEAR-SWITCHING-MIB › agentSwitchStaticMacFilteringSourcePortMask
agentSwitchStaticMacFilteringSourcePortMask
Module: NETGEAR-SWITCHING-MIB
OID (symbolic): NETGEAR-SWITCHING-MIB::agentSwitchStaticMacFilteringSourcePortMask
OID (numeric): 1.3.6.1.4.1.4526.11.1.2.8.5.1.3
Node type: OBJECT-TYPE
Type: AgentPortMask
Access: read-write
Description: The Static MAC Filter source port mask.
When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this range that are not valid ports return a failure message, but will still apply configuration for valid ports.
To obtain port numbers from interface numbers, use the objects agentPortDot1dBasePort and agentPortIfIndex in the agentPortConfigTable table.
What is agentSwitchStaticMacFilteringSourcePortMask?
This AgentPortMask sets which ports are allowed as the source for the filtered MAC address's static forwarding entry; ports outside the switch's valid range are ignored with a failure message while valid ones are still applied. Admins look up the port numbers via agentPortDot1dBasePort/agentPortIfIndex before building the mask.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.8.5.1.3 snmpwalk -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentSwitchStaticMacFilteringSourcePortMask
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.8.5.1.3.1 snmpget -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentSwitchStaticMacFilteringSourcePortMask.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.1.2.8.5.1.3.1 s <value>
Start monitoring Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-SWITCHING-MIB::agentSwitchStaticMacFilteringSourcePortMask OID value, configure state conditions and alerts, and monitor any Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.11 | ng700smartswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.11.1 | agentSwitching | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2 | agentConfigGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8 | agentSwitchConfigGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8.5 | agentSwitchStaticMacFilteringTable | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8.5.1 | agentSwitchStaticMacFilteringEntry | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8.5.1.3 | agentSwitchStaticMacFilteringSourcePortMask | NETGEAR-SWITCHING-MIB |