All MIBs › NETGEAR-SWITCHING-MIB › agentSwitchSnoopingQuerierElectionParticipateMode
agentSwitchSnoopingQuerierElectionParticipateMode
Module: NETGEAR-SWITCHING-MIB
OID (symbolic): NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierElectionParticipateMode
OID (numeric): 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This enables or disables the Snooping Querier Election Participation mode. When enabled snooping querier switch will participate in querier election up on discovering another querier in the specified vlan. When disabled, up on discovering another querier, snooping querier moves to non-querier state.
What is agentSwitchSnoopingQuerierElectionParticipateMode?
This disable(0)/enable(1) flag (default disable) controls what the querier does when it discovers another querier on the same VLAN: enabled means it participates in querier election (potentially winning back the querier role), while disabled means it immediately steps down to non-querier state. An admin enables this on the preferred, more capable switch so it reclaims the querier role after a failover.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.3 snmpwalk -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierElectionParticipateMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.3.1 snmpget -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierElectionParticipateMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.3.1 i <value>
Start monitoring Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-SWITCHING-MIB::agentSwitchSnoopingQuerierElectionParticipateMode OID value, configure state conditions and alerts, and monitor any Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.11 | ng700smartswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.11.1 | agentSwitching | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2 | agentConfigGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8 | agentSwitchConfigGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8.20 | agentSwitchSnoopingQuerierGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8.20.2 | agentSwitchSnoopingQuerierVlanTable | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8.20.2.1 | agentSwitchSnoopingQuerierVlanEntry | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.8.20.2.1.3 | agentSwitchSnoopingQuerierElectionParticipateMode | NETGEAR-SWITCHING-MIB |