NETGEAR-SWITCHING-MIB :: agentSwitchSnoopingIntfGroupMembershipInterval

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › NETGEAR-SWITCHING-MIB › agentSwitchSnoopingIntfGroupMembershipInterval

agentSwitchSnoopingIntfGroupMembershipInterval

Module: NETGEAR-SWITCHING-MIB

OID (symbolic): NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfGroupMembershipInterval

OID (numeric): 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: The amount of time in seconds that a switch will wait for a report from a particular group on the selected interface before deleting the interface from the entry. This value must be greater than agentSwitchIGMPSnoopingIntfMaxResponseTime.

What is agentSwitchSnoopingIntfGroupMembershipInterval?

This sets, in seconds (2-3600, default 260), how long the switch waits for a membership report for a multicast group on this interface before removing the interface from that group's forwarding entry; it must stay greater than agentSwitchSnoopingIntfMaxResponseTime. Lowering it makes the switch prune stale multicast receivers faster after they stop responding.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.3
snmpwalk -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfGroupMembershipInterval

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.3.1
snmpget -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfGroupMembershipInterval.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.1.2.8.7.1.1.3.1 i <value>

Start monitoring Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-SWITCHING-MIB::agentSwitchSnoopingIntfGroupMembershipInterval OID value, configure state conditions and alerts, and monitor any Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
1.3.6.1.4.1.4526.11ng700smartswitchNetgear-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.11.1agentSwitchingNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2agentConfigGroupNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2.8agentSwitchConfigGroupNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2.8.7agentSwitchSnoopingIntfGroupNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2.8.7.1agentSwitchSnoopingIntfTableNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2.8.7.1.1agentSwitchSnoopingIntfEntryNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.2.8.7.1.1.3agentSwitchSnoopingIntfGroupMembershipIntervalNETGEAR-SWITCHING-MIB