All MIBs › NETGEAR-SWITCHING-MIB › agentStpCstBridgeHoldCount
agentStpCstBridgeHoldCount
Module: NETGEAR-SWITCHING-MIB
OID (symbolic): NETGEAR-SWITCHING-MIB::agentStpCstBridgeHoldCount
OID (numeric): 1.3.6.1.4.1.4526.11.1.2.15.10.12
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The MSTP bridge hold count for the CIST. This command sets the value of maximum bpdus that a bridge is allowed to send within a hello time window. The default value is 6.
What is agentStpCstBridgeHoldCount?
This sets the MSTP bridge hold count for the CIST (1-10, default 6), the maximum number of BPDUs this bridge is allowed to send within one hello-time window. An admin raises it if legitimate topology changes are being rate-limited too aggressively by the default BPDU-per-interval cap.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.15.10.12 snmpwalk -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentStpCstBridgeHoldCount
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.15.10.12.1 snmpget -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentStpCstBridgeHoldCount.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.1.2.15.10.12.1 i <value>
Start monitoring Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-SWITCHING-MIB::agentStpCstBridgeHoldCount OID value, configure state conditions and alerts, and monitor any Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.11 | ng700smartswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.11.1 | agentSwitching | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2 | agentConfigGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.15 | agentStpSwitchConfigGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.15.10 | agentStpCstConfigGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.15.10.12 | agentStpCstBridgeHoldCount | NETGEAR-SWITCHING-MIB |