All MIBs › NETGEAR-SWITCHING-MIB › agentSnmpTrapReceiverStatus
agentSnmpTrapReceiverStatus
Module: NETGEAR-SWITCHING-MIB
OID (symbolic): NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverStatus
OID (numeric): 1.3.6.1.4.1.4526.11.1.2.6.4.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The switch's Snmp Trap Reciever Status. active(1) - This trap receiver is active, allowing SNMP Traps to be sent to this receiver.
notInService(2) - This trap reciever is not active; no SNMP Traps will be sent to this reciever until it's set back to active(1).
config(3) - The trap reciever Status must be set to this value in order to configure it. When creating a new trap receiver entry, the Status will initially be set to this value. Note: agentSnmpTrapReceiverIPAddress must be set to non-zero before changing to active(1) or notInService(2).
destroy(4) - Set to this value to remove the trap receiver entry from the agent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.6.4.1.4 snmpwalk -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.2.6.4.1.4.1 snmpget -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.1.2.6.4.1.4.1 i <value>
Start monitoring Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-SWITCHING-MIB::agentSnmpTrapReceiverStatus OID value, configure state conditions and alerts, and monitor any Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.11 | ng700smartswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.11.1 | agentSwitching | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2 | agentConfigGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.6 | agentSnmpConfigGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.6.4 | agentSnmpTrapReceiverConfigTable | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.6.4.1 | agentSnmpTrapReceiverConfigEntry | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.2.6.4.1.4 | agentSnmpTrapReceiverStatus | NETGEAR-SWITCHING-MIB |