NETGEAR-SWITCHING-MIB :: agentClearVlan

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › NETGEAR-SWITCHING-MIB › agentClearVlan

agentClearVlan

Module: NETGEAR-SWITCHING-MIB

OID (symbolic): NETGEAR-SWITCHING-MIB::agentClearVlan

OID (numeric): 1.3.6.1.4.1.4526.11.1.3.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: clear vlan entries

What is agentClearVlan?

Setting this enable(1)/disable(2) object to enable(1) clears all configured VLAN entries from the switch. An admin uses this to wipe VLAN configuration back to a clean slate before re-provisioning the switch for a different network role.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.3.9
snmpwalk -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentClearVlan

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.3.9.1
snmpget -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentClearVlan.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.1.3.9.1 i <value>

Start monitoring Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-SWITCHING-MIB::agentClearVlan OID value, configure state conditions and alerts, and monitor any Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4526netgearFSM726S-MIB
1.3.6.1.4.1.4526.11ng700smartswitchNetgear-MIB
Numeric OIDNameModule
1.3.6.1.4.1.4526.11.1agentSwitchingNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.3agentSystemGroupNETGEAR-SWITCHING-MIB
1.3.6.1.4.1.4526.11.1.3.9agentClearVlanNETGEAR-SWITCHING-MIB