All MIBs › NETGEAR-SWITCHING-MIB › agentCableTesterStatus
agentCableTesterStatus
Module: NETGEAR-SWITCHING-MIB
OID (symbolic): NETGEAR-SWITCHING-MIB::agentCableTesterStatus
OID (numeric): 1.3.6.1.4.1.4526.11.1.4.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Status of the Virtual Cable Tester active(1) - cable testing is in progress. Set to this value to start the test. success(2) - A successful test was performed. Cannot be set. failure(3) - A failure was encountered during the test. Cannot be set. uninitialized(4) - No test has been performed yet. Cannot be set.
What is agentCableTesterStatus?
Setting this object to active(1) starts a Virtual Cable Test (TDR-based diagnostic) on the port selected by agentCableTesterIfIndex; success(2), failure(3), and uninitialized(4) (the default) are read-only outcomes reported back and cannot be set. An admin sets active(1) remotely to diagnose a suspected bad cable run without needing physical access to the port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.4.1 snmpwalk -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentCableTesterStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.4.1.1 snmpget -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentCableTesterStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.1.4.1.1 i <value>
Start monitoring Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-SWITCHING-MIB::agentCableTesterStatus OID value, configure state conditions and alerts, and monitor any Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.11 | ng700smartswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.11.1 | agentSwitching | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.4 | agentCableTesterGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.4.1 | agentCableTesterStatus | NETGEAR-SWITCHING-MIB |