All MIBs › NETGEAR-SWITCHING-MIB › agentCableTesterIfIndex
agentCableTesterIfIndex
Module: NETGEAR-SWITCHING-MIB
OID (symbolic): NETGEAR-SWITCHING-MIB::agentCableTesterIfIndex
OID (numeric): 1.3.6.1.4.1.4526.11.1.4.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: Determines on which port to perform the cable test. Limited to copper based ports.
What is agentCableTesterIfIndex?
This Unsigned32 (default 0) selects which port the Virtual Cable Test will run on, and is limited to copper-based ports since the test relies on electrical (TDR) characteristics that don't apply to fiber. An admin sets this before setting agentCableTesterStatus to active(1) to target the specific port suspected of a bad cable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.4.2 snmpwalk -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentCableTesterIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.11.1.4.2.1 snmpget -v2c -c public <target> NETGEAR-SWITCHING-MIB::agentCableTesterIfIndex.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.11.1.4.2.1 i <value>
Start monitoring Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-SWITCHING-MIB::agentCableTesterIfIndex OID value, configure state conditions and alerts, and monitor any Netgear ProSafe/NG700-series smart switch (Layer 2 switching/cable diagnostics) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.11 | ng700smartswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.11.1 | agentSwitching | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.4 | agentCableTesterGroup | NETGEAR-SWITCHING-MIB |
| 1.3.6.1.4.1.4526.11.1.4.2 | agentCableTesterIfIndex | NETGEAR-SWITCHING-MIB |