All MIBs › NETGEAR-DCBX-MIB › agentDcbxSupportedTLVs
agentDcbxSupportedTLVs
Module: NETGEAR-DCBX-MIB
OID (symbolic): NETGEAR-DCBX-MIB::agentDcbxSupportedTLVs
OID (numeric): 1.3.6.1.4.1.4526.10.58.1.1.1.4
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Bitmap that includes the supported set of DCBX LLDP TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management.
Having the bit 'pfc(0)' set indicates that the LLDP transmit PFC TLV as part of DCBX TLVs.
Having the bit 'etcConfig(1)' set indicates that the LLDP transmit ETS configuration TLV as part of DCBX TLVs.
Having the bit 'etsRecom(2)' set indicates that transmit ETS Recomdenation TLV as part of DCBX TLVs.
Having the bit 'applicationPriority(3)' set indicates that the LLDP transmit applicationPriority TLV as part of DCBX TLVs.
What is agentDcbxSupportedTLVs?
This read-only bitmap reports which DCBX LLDP TLVs - PFC, ETS Configuration, ETS Recommendation, and Application Priority - the interface hardware is capable of transmitting. Admins check it to confirm hardware capability before trying to enable a given TLV in agentDcbxConfigTLVsTxEnable, since there is no point enabling a TLV that the port doesn't report as supported. A port with full DCB support would show all four bits set, while an older NIC-facing port might report only the pfc(0) bit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.10.58.1.1.1.4 snmpwalk -v2c -c public <target> NETGEAR-DCBX-MIB::agentDcbxSupportedTLVs
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.10.58.1.1.1.4.1 snmpget -v2c -c public <target> NETGEAR-DCBX-MIB::agentDcbxSupportedTLVs.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> agentDcbxSupportedTLVs.1
Start monitoring Netgear DCB-capable Ethernet switch (Data Center Bridging Exchange) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-DCBX-MIB::agentDcbxSupportedTLVs OID value, configure state conditions and alerts, and monitor any Netgear DCB-capable Ethernet switch (Data Center Bridging Exchange) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.10 | ng7000managedswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.10.58 | fastPathDCBX | NETGEAR-DCBX-MIB |
| 1.3.6.1.4.1.4526.10.58.1 | agentDcbxGroup | NETGEAR-DCBX-MIB |
| 1.3.6.1.4.1.4526.10.58.1.1 | agentDcbxTable | NETGEAR-DCBX-MIB |
| 1.3.6.1.4.1.4526.10.58.1.1.1 | agentDcbxEntry | NETGEAR-DCBX-MIB |
| 1.3.6.1.4.1.4526.10.58.1.1.1.4 | agentDcbxSupportedTLVs | NETGEAR-DCBX-MIB |