All MIBs › NETGEAR-DCBX-MIB › agentDcbxConfigTLVsTxEnable
agentDcbxConfigTLVsTxEnable
Module: NETGEAR-DCBX-MIB
OID (symbolic): NETGEAR-DCBX-MIB::agentDcbxConfigTLVsTxEnable
OID (numeric): 1.3.6.1.4.1.4526.10.58.1.1.1.5
Node type: OBJECT-TYPE
Type: Bits
Access: read-write
Description: Bitmap that includes the DCBX defined set of LLDP TLVs the device is capable of and whose transmission is allowed on the local LLDP agent by network management.
Having the bit 'pfc(0)' set indicates that the LLDP transmit PFC TLV as part of DCBX TLVs.
Having the bit 'etcConfig(1)' set indicates that the LLDP transmit ETS configuration TLV as part of DCBX TLVs.
Having the bit 'etsRecom(2)' set indicates that transmit ETS Recomdenation TLV as part of DCBX TLVs.
Having the bit 'applicationPriority(3)' set indicates that the LLDP transmit applicationPriority TLV as part of DCBX TLVs.
What is agentDcbxConfigTLVsTxEnable?
This read-write bitmap controls which DCBX LLDP TLVs - PFC, ETS Configuration, ETS Recommendation, Application Priority - the interface is actually allowed to transmit to its link partner. Unlike agentDcbxSupportedTLVs, which only reports hardware capability, this object is how an admin enables or disables advertisement of specific DCB features per port, such as turning on the pfc(0) bit so Priority Flow Control gets negotiated with an attached FCoE-capable NIC. Setting this bitmap with only applicationPriority(3) set would stop the port from advertising PFC or ETS TLVs while still telling the peer which traffic classes map to which 802.1p priorities.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.10.58.1.1.1.5 snmpwalk -v2c -c public <target> NETGEAR-DCBX-MIB::agentDcbxConfigTLVsTxEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.10.58.1.1.1.5.1 snmpget -v2c -c public <target> NETGEAR-DCBX-MIB::agentDcbxConfigTLVsTxEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4526.10.58.1.1.1.5.1 s <value>
Start monitoring Netgear DCB-capable Ethernet switch (Data Center Bridging Exchange) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETGEAR-DCBX-MIB::agentDcbxConfigTLVsTxEnable OID value, configure state conditions and alerts, and monitor any Netgear DCB-capable Ethernet switch (Data Center Bridging Exchange) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.10 | ng7000managedswitch | Netgear-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.10.58 | fastPathDCBX | NETGEAR-DCBX-MIB |
| 1.3.6.1.4.1.4526.10.58.1 | agentDcbxGroup | NETGEAR-DCBX-MIB |
| 1.3.6.1.4.1.4526.10.58.1.1 | agentDcbxTable | NETGEAR-DCBX-MIB |
| 1.3.6.1.4.1.4526.10.58.1.1.1 | agentDcbxEntry | NETGEAR-DCBX-MIB |
| 1.3.6.1.4.1.4526.10.58.1.1.1.5 | agentDcbxConfigTLVsTxEnable | NETGEAR-DCBX-MIB |