All MIBs › NETBOTZ-MIB › expPort_amps_uV_per_10mA
expPort_amps_uV_per_10mA
Module: NETBOTZ-MIB
OID (symbolic): NETBOTZ-MIB::expPort_amps_uV_per_10mA
OID (numeric): 1.3.6.1.4.1.5528.31.1.26
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The scaling factor used for the amperage probe to convert microvolts measured from the Amp Detect into 10s of milliamps of current. Needs to be set based on the type of Amp Detect module installed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5528.31.1.26 snmpwalk -v2c -c public <target> NETBOTZ-MIB::expPort_amps_uV_per_10mA
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5528.31.1.26.1 snmpget -v2c -c public <target> NETBOTZ-MIB::expPort_amps_uV_per_10mA.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5528.31.1.26.1 i <value>
Start monitoring NetBotz/APC environmental monitoring appliance (any generation, core registration module) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETBOTZ-MIB::expPort_amps_uV_per_10mA OID value, configure state conditions and alerts, and monitor any NetBotz/APC environmental monitoring appliance (any generation, core registration module) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.5528 | netBotz | NETBOTZ-MIB |
| 1.3.6.1.4.1.5528.31 | expPortTable | NETBOTZ-MIB |
| 1.3.6.1.4.1.5528.31.1 | expPortEntry | NETBOTZ-MIB |
| 1.3.6.1.4.1.5528.31.1.26 | expPort_amps_uV_per_10mA | NETBOTZ-MIB |