NETASQ-IF-MIB

All MIBs › NETASQ-IF-MIB

Category: Firewall

Description: Provides interface-level traffic statistics and link state information for NETASQ firewall network interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETASQ-IF-MIB?

NETASQ-IF-MIB is a vendor-specific MIB from NETASQ (Stormshield) providing interface-level traffic statistics and link-state information for the network interfaces on its firewall appliances. It exposes a list of interfaces along with their operational/link state and traffic counters, mirroring in spirit the standard IF-MIB but scoped to NETASQ's own interface model. It is used to monitor the hardware status of the firewall's network connectivity — confirming each interface (e.g., WAN, LAN, DMZ) is up and passing the expected volume of traffic, which is foundational for confirming the appliance is correctly routing/filtering traffic. It likely complements or overlaps with the standard IETF IF-MIB, since interface monitoring is a well-established convention it would naturally build on. It is typically deployed by network/security teams monitoring NETASQ firewall appliances to ensure all configured interfaces remain up and are carrying traffic as expected. Engineers can download the NETASQ-IF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETASQ-IF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NETASQ (Stormshield) firewall appliance

Monitoring Examples

No object or table names were provided for this module (sample_objects is empty), so specific OIDs cannot be cited; in practice an admin would poll the per-interface link-state and traffic-counter objects to confirm each firewall interface is up and passing traffic at expected volumes. An interface unexpectedly showing a down link state or a traffic count that has stopped incrementing would indicate a cable, port, or upstream connectivity fault on that link.

What Can Be Monitored

interface link/operational state
interface traffic counters (in/out)
number of interfaces

Imported Objects

From NETASQ-SMI-MIB

ntqif

OBJECT-IDENTITY

From RFC1213-MIB

DisplayString

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using ntqifIOutIcmpBytes OID:

Select an NETASQ (Stormshield) firewall appliance (interface traffic/link state) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ntqifIOutIcmpBytes into the Find box to locate it in the OID tree, then select it and click OK. It reports the outgoing ICMP data bytes. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ntqifTable	1.3.6.1.4.1.11256.1.4.1		not-accessible	List of interface
ntqifEntry	1.3.6.1.4.1.11256.1.4.1.1		not-accessible	Each entry in the ntqifTable holds a set of information.
INT ntqifIndex	1.3.6.1.4.1.11256.1.4.1.1.1	INTEGER	read-only	A unique value for the table. Its value ranges between 1 and 65535 and may not be contigous. the index has no other meaning but a pure index
STR ntqifUserName	1.3.6.1.4.1.11256.1.4.1.1.2	SnmpAdminString	read-only	User interface name
STR ntqifName	1.3.6.1.4.1.11256.1.4.1.1.3	DisplayString	read-only	System interface name
STR ntqifAddr	1.3.6.1.4.1.11256.1.4.1.1.4	DisplayString	read-only	Interface Adress
STR ntqifMask	1.3.6.1.4.1.11256.1.4.1.1.5	DisplayString	read-only	Interface mask
STR ntqifType	1.3.6.1.4.1.11256.1.4.1.1.6	DisplayString	read-only	Interface type
I32 ntqifColor	1.3.6.1.4.1.11256.1.4.1.1.7	Integer32	read-only
I32 ntqifMacThroughput	1.3.6.1.4.1.11256.1.4.1.1.8	Integer32	read-only
I32 ntqifCurThroughput	1.3.6.1.4.1.11256.1.4.1.1.9	Integer32	read-only	incoming + outgoing current throughput in b/s
I32 ntqifMaxThroughput	1.3.6.1.4.1.11256.1.4.1.1.10	Integer32	read-only	incoming + outgoing maximum throughput in b/s
C64 ntqifPktAccepted	1.3.6.1.4.1.11256.1.4.1.1.11	Counter64	read-only	number of accepted packets
C64 ntqifPktBlocked	1.3.6.1.4.1.11256.1.4.1.1.12	Counter64	read-only	number of packets that have been blocked
C64 ntqifPktFragmented	1.3.6.1.4.1.11256.1.4.1.1.13	Counter64	read-only	number of fragmented packets
C64 ntqifPktTcp	1.3.6.1.4.1.11256.1.4.1.1.14	Counter64	read-only	TCP packet forwarded
C64 ntqifPktUdp	1.3.6.1.4.1.11256.1.4.1.1.15	Counter64	read-only	UDP packet forwarded
C64 ntqifPktIcmp	1.3.6.1.4.1.11256.1.4.1.1.16	Counter64	read-only	ICMP packet forwarded
C64 ntqifTotalBytes	1.3.6.1.4.1.11256.1.4.1.1.17	Counter64	read-only	data bytes forwarded
C64 ntqifTcpBytes	1.3.6.1.4.1.11256.1.4.1.1.18	Counter64	read-only	incoming + outgoing TCP data bytes
C64 ntqifUdpBytes	1.3.6.1.4.1.11256.1.4.1.1.19	Counter64	read-only	incoming + outgoing UDP data bytes
C64 ntqifIcmpBytes	1.3.6.1.4.1.11256.1.4.1.1.20	Counter64	read-only	incoming + outgoing ICMP data bytes
C64 ntqifTcpConn	1.3.6.1.4.1.11256.1.4.1.1.21	Counter64	read-only	TCP connection established
C64 ntqifUdpConn	1.3.6.1.4.1.11256.1.4.1.1.22	Counter64	read-only	UDP connection established
I32 ntqifTcpConnCount	1.3.6.1.4.1.11256.1.4.1.1.23	Integer32	read-only	current TCP connection count
I32 ntqifUdpConnCount	1.3.6.1.4.1.11256.1.4.1.1.24	Integer32	read-only	current UCP connection count
I32 ntqifInCurThroughput	1.3.6.1.4.1.11256.1.4.1.1.25	Integer32	read-only	Incoming Current throughput in b/s
I32 ntqifOutCurThroughput	1.3.6.1.4.1.11256.1.4.1.1.26	Integer32	read-only	Outgoing Current throughput in b/s
I32 ntqifInMaxThroughput	1.3.6.1.4.1.11256.1.4.1.1.27	Integer32	read-only	Incoming maximum throughput in b/s
I32 ntqifOutMaxThroughput	1.3.6.1.4.1.11256.1.4.1.1.28	Integer32	read-only	Outgoing maximum throughput in b/s
C64 ntqifInTotalBytes	1.3.6.1.4.1.11256.1.4.1.1.29	Counter64	read-only	Incoming data bytes
C64 ntqifOutTotalBytes	1.3.6.1.4.1.11256.1.4.1.1.30	Counter64	read-only	Outgoing data bytes
C64 ntqifInTcpBytes	1.3.6.1.4.1.11256.1.4.1.1.31	Counter64	read-only	Incoming TCP data bytes
C64 ntqifOutTcpBytes	1.3.6.1.4.1.11256.1.4.1.1.32	Counter64	read-only	Outgoing TCP data bytes
C64 ntqifInUdpBytes	1.3.6.1.4.1.11256.1.4.1.1.33	Counter64	read-only	Incoming UDP data bytes
C64 ntqifOutUdpBytes	1.3.6.1.4.1.11256.1.4.1.1.34	Counter64	read-only	Outgoing UDP data bytes
C64 ntqifInIcmpBytes	1.3.6.1.4.1.11256.1.4.1.1.35	Counter64	read-only	Incoming ICMP data bytes
C64 ntqifIOutIcmpBytesEx	1.3.6.1.4.1.11256.1.4.1.1.36	Counter64	read-only	Outgoing ICMP data bytes

RFC description

Netasq interface MIB tracking throughput, packet statistics, and network performance metrics.

Start monitoring NETASQ (Stormshield) firewall appliance (interface traffic/link state) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETASQ-IF-MIB