All MIBs › NETASQ-ALARM-MIB › ntqAProto
ntqAProto
Module: NETASQ-ALARM-MIB
OID (symbolic): NETASQ-ALARM-MIB::ntqAProto
OID (numeric): 1.3.6.1.4.1.11256.1.5.0.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: IP protocol
What is ntqAProto?
This read-only field reports the IP protocol (such as TCP, UDP, or ICMP) of the traffic that triggered this alarm. It's one of the basic identifying details an admin uses to understand what kind of traffic set off the alert.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11256.1.5.0.1.4 snmpwalk -v2c -c public <target> NETASQ-ALARM-MIB::ntqAProto
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11256.1.5.0.1.4.1 snmpget -v2c -c public <target> NETASQ-ALARM-MIB::ntqAProto.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ntqAProto.1
Start monitoring NETASQ/Stormshield UTM firewall appliance (IDS/IPS alarm table) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NETASQ-ALARM-MIB::ntqAProto OID value, configure state conditions and alerts, and monitor any NETASQ/Stormshield UTM firewall appliance (IDS/IPS alarm table) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11256 | netasq | NETASQ-SMI-MIB |
| 1.3.6.1.4.1.11256.1 | netasqMIB | NETASQ-SMI-MIB |
| 1.3.6.1.4.1.11256.1.5 | ntqAlarm | NETASQ-SMI-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11256.1.5.0 | ntqATable | NETASQ-ALARM-MIB |
| 1.3.6.1.4.1.11256.1.5.0.1 | ntqAEntry | NETASQ-ALARM-MIB |
| 1.3.6.1.4.1.11256.1.5.0.1.4 | ntqAProto | NETASQ-ALARM-MIB |