All MIBs › NBASE-G1-MIB › nbsSysSerialSlipBaudRate
nbsSysSerialSlipBaudRate
Module: NBASE-G1-MIB
OID (symbolic): NBASE-G1-MIB::nbsSysSerialSlipBaudRate
OID (numeric): 1.3.6.1.4.1.629.1.3.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Serial Line Baud Rate when in SLIP Mode. This value is stored in the system NVRAM as well as in the SNMP Agent current configuration.
What is nbsSysSerialSlipBaudRate?
Sets the baud rate — 9600, 19200, or 38400 — used on the serial line when it is in SLIP mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.629.1.3.16 snmpwalk -v2c -c public <target> NBASE-G1-MIB::nbsSysSerialSlipBaudRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.629.1.3.16.1 snmpget -v2c -c public <target> NBASE-G1-MIB::nbsSysSerialSlipBaudRate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.629.1.3.16.1 i <value>
Start monitoring NBase-Xyplex G1-series managed Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NBASE-G1-MIB::nbsSysSerialSlipBaudRate OID value, configure state conditions and alerts, and monitor any NBase-Xyplex G1-series managed Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.629 | nbase | CORE-MIB |
| 1.3.6.1.4.1.629.1 | nbSwitchG1 | CORE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.629.1.3 | nbsSysSnmpCfg | NBASE-G1-MIB |
| 1.3.6.1.4.1.629.1.3.16 | nbsSysSerialSlipBaudRate | NBASE-G1-MIB |