All MIBs › NBASE-G1-MIB › nbsSysInitDownload
nbsSysInitDownload
Module: NBASE-G1-MIB
OID (symbolic): NBASE-G1-MIB::nbsSysInitDownload
OID (numeric): 1.3.6.1.4.1.629.1.3.22
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is used to initiate a download session from the above TFTP server. Note that the only writeable value is active(1) and activeAppl(3), if no session is active at this moment.
What is nbsSysInitDownload?
Starts a firmware download session from the configured TFTP server: write active or activeAppl to begin, only when no session is already active; inactive reflects an idle state on read.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.629.1.3.22 snmpwalk -v2c -c public <target> NBASE-G1-MIB::nbsSysInitDownload
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.629.1.3.22.1 snmpget -v2c -c public <target> NBASE-G1-MIB::nbsSysInitDownload.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.629.1.3.22.1 i <value>
Start monitoring NBase-Xyplex G1-series managed Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the NBASE-G1-MIB::nbsSysInitDownload OID value, configure state conditions and alerts, and monitor any NBase-Xyplex G1-series managed Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.629 | nbase | CORE-MIB |
| 1.3.6.1.4.1.629.1 | nbSwitchG1 | CORE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.629.1.3 | nbsSysSnmpCfg | NBASE-G1-MIB |
| 1.3.6.1.4.1.629.1.3.22 | nbsSysInitDownload | NBASE-G1-MIB |