MY-VLAN-MIB :: myVlanConfigPortMember

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › MY-VLAN-MIB › myVlanConfigPortMember

myVlanConfigPortMember

Module: MY-VLAN-MIB

OID (symbolic): MY-VLAN-MIB::myVlanConfigPortMember

OID (numeric): 1.3.6.1.4.1.171.10.97.2.9.1.7.1.4

Node type: OBJECT-TYPE

Type: PortList

Access: read-only

Description: Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then that port is included in the set of ports; the port is not included if its bit has a value of '0'.

What is myVlanConfigPortMember?

This read-only PortList bitmap identifies which physical ports belong to a VLAN, with each bit representing one port (the first octet covering ports 1-8, the second 9-16, and so on). Admins use it to see current VLAN port membership at a glance, since a bit value of 1 means that port is included in the VLAN. For example, if bit 0 of the first octet is 1, port 1 is a member of this VLAN.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.97.2.9.1.7.1.4
snmpwalk -v2c -c public <target> MY-VLAN-MIB::myVlanConfigPortMember

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.97.2.9.1.7.1.4.1
snmpget -v2c -c public <target> MY-VLAN-MIB::myVlanConfigPortMember.1

Start monitoring D-Link managed switch (802.1Q VLAN configuration) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MY-VLAN-MIB::myVlanConfigPortMember OID value, configure state conditions and alerts, and monitor any D-Link managed switch (802.1Q VLAN configuration) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.171d_linkDE1500-MIB
1.3.6.1.4.1.171.10dlink_productsDES-1226G-MIB
1.3.6.1.4.1.171.10.97switchMibMY-SMI
1.3.6.1.4.1.171.10.97.2myMgmtMY-SMI
Numeric OIDNameModule
1.3.6.1.4.1.171.10.97.2.9myVlanMIBMY-VLAN-MIB
1.3.6.1.4.1.171.10.97.2.9.1myVlanMIBObjectsMY-VLAN-MIB
1.3.6.1.4.1.171.10.97.2.9.1.7myVlanConfigTableMY-VLAN-MIB
1.3.6.1.4.1.171.10.97.2.9.1.7.1myVlanConfigEntryMY-VLAN-MIB
1.3.6.1.4.1.171.10.97.2.9.1.7.1.4myVlanConfigPortMemberMY-VLAN-MIB