All MIBs › MY-ADDRESS-MIB › myMacNotiGlobalEnabled
myMacNotiGlobalEnabled
Module: MY-ADDRESS-MIB
OID (symbolic): MY-ADDRESS-MIB::myMacNotiGlobalEnabled
OID (numeric): 1.3.6.1.4.1.171.10.97.2.22.1.2.1
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
Description: Indicates whether the MAC notification feature is currently running in the device.
Setting this object to disabled(2) disables the MAC notification feature globally thus disabling the feature at each interface.
Setting this object to enabled(1) will start the MAC notification feature running in the device. If the feature is already running, setting to enabled(1) has no effect. Once the MAC notification is enabled, whether the feature is running at each interface is controlled by the myMacNotiIfCfgTable.
What is myMacNotiGlobalEnabled?
This read-write EnabledStatus globally turns the MAC address change notification feature on or off across the entire device. An admin sets this to enabled(1) to start generating MacChangedNotifications device-wide, after which per-interface behavior is further controlled by myMacNotiIfCfgTable; setting it to disabled(2) suppresses the feature everywhere regardless of per-interface settings. For example, an admin troubleshooting notification flooding might set myMacNotiGlobalEnabled to disabled(2) to immediately stop all MAC change traps from the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.171.10.97.2.22.1.2.1 snmpwalk -v2c -c public <target> MY-ADDRESS-MIB::myMacNotiGlobalEnabled
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.171.10.97.2.22.1.2.1.1 snmpget -v2c -c public <target> MY-ADDRESS-MIB::myMacNotiGlobalEnabled.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.171.10.97.2.22.1.2.1.1 s <value>
Start monitoring D-Link managed switch (IP/MAC address table) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MY-ADDRESS-MIB::myMacNotiGlobalEnabled OID value, configure state conditions and alerts, and monitor any D-Link managed switch (IP/MAC address table) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.171 | d_link | DE1500-MIB |
| 1.3.6.1.4.1.171.10 | dlink_products | DES-1226G-MIB |
| 1.3.6.1.4.1.171.10.97 | switchMib | MY-SMI |
| 1.3.6.1.4.1.171.10.97.2 | myMgmt | MY-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.171.10.97.2.22 | myAddressMIB | MY-ADDRESS-MIB |
| 1.3.6.1.4.1.171.10.97.2.22.1 | myAddressMIBObjects | MY-ADDRESS-MIB |
| 1.3.6.1.4.1.171.10.97.2.22.1.2 | myAddressNotificationObjects | MY-ADDRESS-MIB |
| 1.3.6.1.4.1.171.10.97.2.22.1.2.1 | myMacNotiGlobalEnabled | MY-ADDRESS-MIB |